Festool Australia

Festool Australia Festool Australia equips tradies to deliver superior quality finishes with unmatched speed and safety.

View our range of power tools at https://www.festool.com.au or visit our extensive dealer network. Warehouse Operation only – Not open to the public

At Festool, we design our power tools…
To solve problems - We create power tools that meet a need, streamline a process, or improve quality and efficiency. For the way work happens - From rough work to assembly, finishing and storage, we keep every function of the power tool in mind. With your comfort in mind - We limit the noise and vibration of our power tools, and carefully balance them to feel comfortable in your hands. To save time - Our power tools are easy to use and adjustments are easy with tools onboard and features, such as our FastFix® blade and bit changes, StickFix® hook and loop abrasives, and Plug-it

23/09/2026

Chipped or splintered edges on melamine and veneered panels usually mean a trip back to a stationary saw or a finish you're not proud of.

The TSV 60 K solves that on site. Its integrated scorer pre-cuts the surface layer before the main blade runs through, delivering a clean edge on both faces in one pass.

It's the only saw in its class built this way so you get panel saw quality, on a rail, wherever the job is.

Chipped edges cost time. Clean cuts keep the job moving.Get cleaner results from the first cut, with less chipping, less...
23/09/2026

Chipped edges cost time. Clean cuts keep the job moving.

Get cleaner results from the first cut, with less chipping, less rework and less time spent fixing edges afterwards.

That means faster progress, a better finish and more confidence when you’re working with materials where every edge matters.

Cleaner cuts. Less rework. Better results.

21/09/2026

Biscuit joiner vs dowel joiner vs Domino joiner. Which one comes out on top?

Biscuit joiners are quick, but can be limiting when strength and accuracy really matter. Dowels mean more marking, more alignment and more chances to lose time getting the joint right.

But Domino gives you strength, speed and repeatable precision in one system.

Less marking. Less lining up. Less room for error.

If you want faster, stronger and more precise joinery, Domino is the clear step up.

19/09/2026

If you're a cabinet maker, joiner, or furniture manufacturer weighing up whether the Festool Domino joiner is worth the investment, this is the real-world proof rather than a marketing pitch.

Whether you're building commercial tabletops, furniture bases, or cabinetry at scale, the consistency and reliability shown here speaks directly to the pressure your workshop puts on equipment every day.




@ christiancole

18/09/2026

Want stronger joints without dragging a lead around?

The cordless DOMINO gives you the freedom to make fast, accurate joints in the workshop or on site. Its unique pendulum routing action creates precise, twist-resistant holes for solid, reliable connections.

With an ergonomic spade handle and cordless freedom, you can work comfortably without the hassle of cables.

Every normal delta sander burns out the same spot first the tip. One scorched corner and the whole sheets in the bin, ev...
18/09/2026

Every normal delta sander burns out the same spot first the tip. One scorched corner and the whole sheets in the bin, even though the rest of itsbarely used.

The DTSC 200 fixes that. Tear off the worn tip, rotate the sheet, keep sanding. Do it again and you've had three sanding surfaces out of one sheet.
That's roughly a third of the abrasive cost of a standard delta sander, for the same job.

Add the built-in LED ring so you can actually see what you're sanding, and cordless freedom to work wherever the job is.

18/09/2026

Sick of swapping sanders halfway through the job?

The ROTEX RO 150 is basically three sanders in one. Aggressive rotary mode to rip back your stock. Flick a switch, and it's a fine finishing sander. Need a shine on top? It polishes too.

For the price of one decent sander, you get a machine that does the job of three.

No changing machines. No second tool on the ute. Just crack on and get it done.

Ripping, finishing, polishing.

One sander. Built for the job.

https://www.festool.com.au/ro-150mm-rotex-3-in-1-random-orbital-sander-in-systainer-576019.html

Address

Dandenong South, VIC

Opening Hours

Monday 9am - 4pm
Tuesday 9am - 4pm
Wednesday 9am - 4pm
Thursday 9am - 4pm
Friday 9am - 4pm

Telephone

1300063900

Website

Alerts

Be the first to know and let us send you an email when Festool Australia posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category