Scapefin

12/09/2026

A PRACTICAL UPGRADE FOR YOUR NERO 5.

Add a guard around your wave maker with Scapefin’s AI Nero 5 Guard. The two pieces screw together around the pump, with a bright Hyper Lime finish for a bit of Scapefin colour.

A$34.95 • Guard only • Made specifically for the AI Nero 5

Fishroom tip: check the model on your pump before ordering—this one’s for the Nero 5.

Share your tank setup in the comments, or pass this on to a mate running a Nero 5.

Shop: https://scapefin.au/products/ai-nero-5-guard

10/09/2026

LESS LIGHT SPILL. MORE TANK TIME. 🪸

Enjoy your aquarium with less unwanted light spilling into the room.

The Scapefin AI Prime LED Light Shade hangs from the vent corners, leaving room for airflow while helping keep the light focused on your tank.

✓ Fits AI Prime 16HD Reef and AI Prime Freshwater
✓ Simple hang-on installation
✓ Durable PETG construction

A$34.95 — shown in Scapefin Hyper Lime.
Light unit not included. Check your light model before ordering.

Share this with a mate running an AI Prime.

Shop: https://scapefin.au/products/ai-prime-led-light-shade

09/09/2026

FROZEN FOOD. ONE HANDY FEEDING SPOT. 🐟

Make feeding time a little easier with the Scapefin Floating Fish Feeder — A$14.95.

A floating feeding station for frozen favourites like brine shrimp, bloodworms, mysis and daphnia. Designed to help keep food together while your fish feed.

✓ Floats at the surface
✓ Simple to use and clean
✓ Aquarium-safe PETG

Feeding tip: start with a small portion and remove uneaten food.

What frozen food gets your fish racing to dinner? Tell us below, or share this with a mate who loves their fishroom.

Shop the Floating Fish Feeder:
https://scapefin.au/products/floating-fish-feeder

06/09/2026

GUARD THE NERO 3. KEEP THE FLOW MOVING.

The Scapefin AI Nero 3 Guard is designed specifically for the Aqua Illumination Nero 3 Wave Maker.

Its smooth, open design helps protect fish while allowing water movement, and the two-part screw-together construction provides a secure fit with straightforward installation.

3D printed from durable, aquarium-safe PETG.

Size: 8.5 × 8.5 × 3.8 cm
Colours: Hyper Lime, Safety Orange or Black
Price: A$29.95

Shop here: https://scapefin.au/products/ai-nero-3-guard-essential-protection-for-your-wave-maker

04/09/2026

DITCH THE FILTER SOCK. LOAD YOUR MEDIA.

The Scapefin 2.75-inch Filter Media Cup gives you a simple, customisable way to run filter floss, bio media or your preferred filtration media.

At 103 mm tall, it’s designed for 2.75-inch sump openings and is compatible with Waterbox Cube 15 and 20, plus the Peninsula Mini series.

3D printed from durable, aquarium-safe PETG.

Available in Hyper Lime, Black, Safety Orange and Hot Pink for A$36.95.

Shop here: https://scapefin.au/products/2-75-filter-media-cup-floss-holder

02/09/2026

PROTECT THE SHROOM. KEEP THE FLOW. 🪸

The Scapefin Shroom Shield is a compact coral frag cage designed to help protect mushroom corals during their attachment stage.

✓ Secure removable lid
✓ Helps shield delicate frags from curious fish and strong flow
✓ Open design allows water flow and light exposure
✓ Fits a standard frag plug through the 1.1 cm base hole
✓ Reef-safe PETG construction

Available now for A$19.95.

Shop the Shroom Shield:
https://scapefin.au/products/shroom-shield-mushroom-coral-frag-cage

31/08/2026

KEEP THE FRY IN. KEEP THE WATER FLOWING. 🐟

The Scapefin Fry Saver replaces the standard outlet gate on compatible Fluval and Marina hang-on breeding boxes.

Add a small piece of your preferred filter sponge to help stop tiny fry from escaping through the outlet while maintaining suitable water movement for your setup.

Each A$19.95 pack includes:

✓ 1 × Style A holder
✓ 1 × Style B holder
✓ Simple replacement fit
✓ Aquarium-safe PETG construction
✓ Choice of filter-sponge porosity

Sponge not included—cut your preferred sponge to fit.

Shop the Fry Saver:
https://scapefin.au/products/output-filter-holder-for-fluval-marina-hang-on-breeding-boxes

28/08/2026

AUTOMATIC EGG COLLECTION — CLEAN, COMPACT, SCAPEFIN. 🐟

The Scapefin Fish Egg Collector uses gentle, air-driven flow to guide scattered eggs into a protected collection area before they disappear into the substrate or become an easy meal.

Ideal for breeding rasboras, danios, pea puffers and other egg-scattering species.

✓ Weighted, freestanding Standard model
✓ Compact hex design
✓ Egg grate and moss holder included
✓ Outlet pipe and Fluval breeding-box adaptor included
✓ Made from aquarium-safe PETG in Brisbane, Australia

Standard model available now for A$49.

Air pump, airline and spawning media are required.

Shop:
https://scapefin.au/products/fish-egg-collector-breeding-trap-egg-catcher-for-rasboras-danios-and-aquarium-breeding

27/08/2026

FROM EGGS TO FRY — THE SCAPEFIN WAY 🐟

Give eggs and early-stage fry their own dedicated space with the Scapefin Air-Powered Fry Incubation Tray.

The hang-on design uses adjustable rails and air-powered water movement connected to your air pump. It includes interchangeable fine and coarse outlet sponges plus a translucent cover.

Available in Short, Long and Deep sizes, with colour combinations to suit your fishroom.

Starting from A$79 AUD.

Shop now: https://scapefin.au/products/fish-incubation-tray-for-fry-hatching-grow-out

22/07/2026