Ningbo Magma Tooling Co.,Ltd

Ningbo Magma Tooling Co.,Ltd Ningbo Magma Tooling Co., Ltd.
Ningbo Magma Tooling Co.,Ltd

27/07/2026

Hose Removal Pliers Locking Type MG51500

Used to disconnect hoses by firmly gripping the lines or tubes.
Screw locking design enhances secure gripping.
Suitable for 3/16", 1/4" and 3/8" hoses and lines.
Length: 205mm.

https://www.magmatooling.com/s18/p2067010933_Hose-Removal-Pliers.html

Clic and Clic-R Hose Clamp Pliers Angle Type MG51345

Used to to remove and install reusable Clic and Clic-R type hose clamps.
Angled pliers with 360° swivel jaws allowing to reach difficult angles.
Length: 200mm.

https://www.magmatooling.com/s18/p2066882785_Clic-and-Clic-R-Hose-Clamp-Pliers-Angle-Type-Swivel-Jaws.html

4 PCS Twin Drive Impact Wheel Nut Socket Set MG51546Impact wheel nut sockets with plastic sleeves to prevent damage to a...
06/07/2026

4 PCS Twin Drive Impact Wheel Nut Socket Set MG51546

Impact wheel nut sockets with plastic sleeves to prevent damage to aluminium rims.

Suitable for use on more powerful 3/4" impact guns, ideal for light commercial vehicles.

Sockets can also be used directly on 1/2" drive impact guns.

Manufactured from chrome molybdenum steel (CR-MO).

Set contains:
3x Impact Wheel Nut Sockets: 17, 19, 21mm (6-Point), 1/2" Drive, 85mm long
1x Quick-Lock Adapter: 27mm (6-Point), 3/4" Drive, 52mm long

https://www.magmatooling.com/s18/p2067071100_4-Piece-Twin-Drive-Impact-Wheel-Nut-Socket-Set.html

30/06/2026

MG75089 Plastic Fuel Can 5L high-density polyethylene (HDPE)

Ideal for the storage of petrol and diesel.

Manufactured from high-density polyethylene (HDPE).

Complete with a flexible pouring spout.

Size: 240 (L) x 140 (W) x 240 (H) mm.

Weight: 0.32 kg.

Capacity: 5 Litre.

Reference:

Plastic: MG75089 MG75090 MG75091

METAL: MG75086 MG75087 MG75088

https://www.magmatooling.com/s18/p2064933200_Plastic-Fuel-Can-5-Litre.html

22/06/2026

Drive Shaft Circlip Squeezing Pliers (MG50784)

Used to pre-tension the drive-shaft circlip during assembly of the outer constant velocity joint.
By holding the drive-shaft circlip with the special circlip pliers, the outer drive-shaft splines can be easily assembled onto the CV Joint.
Suitable for most vehicles such as VW, Audi, Škoda, Seat, Ford, Mazda, Honda, Mitsubishi, Nissan, Suzuki, Toyota, Opel.

https://www.magmatooling.com/s18/p2057158843_Drive-Shaft-Circlip-Squeezing-Pliers-Garage-Tools.html

18/06/2026

MG50843: 7 PCS Piston Ring Compressor Set 73 - 111mm

This set enables compressing piston rings for cylinder installation ranging from 73mm to 111mm.

The pliers feature a ratcheting lock to hold the handles in position for precise adjustments of the ring bands.

Piston ring bands are identified with bottom of cylinder markings for easy installation.

Set contains:1 pc ratcheting piston ring compressor pliers.6 pcs bands(diameter):2 7/8" - 3 1/8"(73mm-80mm)3 1/8" - 3 3/8"(80mm-86mm)3 3/8" - 3 5/8"(86mm-93mm)3 5/8" - 3 7/8"(93mm-99mm)3 7/8" - 4 1/8"(99mm-105mm)4 1/8" - 4 3/8"(105mm -111mm)

https://www.magmatooling.com/s18/p2018566816_7-Pcs-Piston-Ring-Compressor-Set.html

Address

Office: Room 2004-2005, Block 2 Greenland Valley Centre #788 Jinshan Road, Jiangbei, Ningbo. Factory/warehouse: Dongyang Village, Shiqi, Haishu, Ningbo
Ningbo

Website

Alerts

Be the first to know and let us send you an email when Ningbo Magma Tooling Co.,Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category