GRT Engineering

GRT Engineering Progettazione e costruzione parti per Suzuki RG 500

🇮🇹 Esperimenti con sonde EGT.🇬🇧 Experiments with EGT sensor.👉Project RSG500👈
06/08/2026

🇮🇹 Esperimenti con sonde EGT.
🇬🇧 Experiments with EGT sensor.

👉Project RSG500👈

🇮🇹 La voce dei nuovi cilindri a Misano.🇬🇧 New sound of new cilinders at Misano.👉Project RSG500👈
21/07/2026

🇮🇹 La voce dei nuovi cilindri a Misano.
🇬🇧 New sound of new cilinders at Misano.

👉Project RSG500👈

10/07/2026

🇮🇹 Primo ruggito del nuovo motore, fatto in casa.
🇬🇧 First run of new engine homemade

👉Project RSG500👈

🇮🇹Assemblaggio finale motore GRT Evo 01.Sono state riprogettare e ricostruite le rave valve, anche i collettori sono sta...
07/07/2026

🇮🇹Assemblaggio finale motore GRT Evo 01.
Sono state riprogettare e ricostruite le rave valve, anche i collettori sono stati fatti nuovi.
Pronti per test a Misano il 10/07 durante il Two Stroke Is Back.

🇬🇧Final assembly engine GRT Evo 01.
I had to redesign and remake the power valves and fabricate new exhaust manifolds, in addition to carrying out inspections and fine-tuning.
Ready to tested at Misano on July 10th during the "Two Stroke Is Back" event.

🇮🇹 Fresatura e tornitura nuovo cilindro racing Suzuki RG500.🇬🇧Milling and turning new racing cilinder Suzuki RG500.     ...
04/07/2026

🇮🇹 Fresatura e tornitura nuovo cilindro racing Suzuki RG500.

🇬🇧Milling and turning new racing cilinder Suzuki RG500.

🇮🇹Fonderia, stampi e prime fusioni, Cilindro RG500 Evo 01.🇬🇧Fondry, moulds and first castings, Cilinder RG500 Evo 01.   ...
27/06/2026

🇮🇹Fonderia, stampi e prime fusioni, Cilindro RG500 Evo 01.

🇬🇧Fondry, moulds and first castings, Cilinder RG500 Evo 01.

🇮🇹Cilindro racing per Suzuki RG500.Primo cilindro plug and play senza apportare tante modifiche.Questo progetto è partit...
20/06/2026

🇮🇹Cilindro racing per Suzuki RG500.
Primo cilindro plug and play senza apportare tante modifiche.
Questo progetto è partito nel 2023 con i primi studi e bozze al cad.
Sono state mantenute gli ingombri e interasse delle viti del carter dell'albero motore, ma è stato sviluppato attorno un cilindro moderno con dei travasi, uno studio dei flussi e un sistema di raffreddamento migliore che dovrebbe garantire miglior coppia e potenza.

🇬🇧Racing cylinder for the Suzuki RG500.
The first plug-and-play cylinder without any modifications.
This project began in 2023 with initial studies and CAD drafts.
The overall dimensions and center distance of the crankcase bolts were retained, but a modern cylinder was developed with transfer ports, flow analysis, and a better cooling system that should ensure better torque and power.

🇮🇹 Aggiornamento elettronico, quasi -3kg e qualche cavallo in più, pronti per test a Cremona.🇬🇧 Elettronic upgrade, almo...
16/06/2026

🇮🇹 Aggiornamento elettronico, quasi -3kg e qualche cavallo in più, pronti per test a Cremona.

🇬🇧 Elettronic upgrade, almost -3kg and a few more hp, ready to test at Cremona circuit.

👉Project RSG500👈

🇮🇹 Test banco prova.Solo teste singole e scarichi, e infine centralina programmabile, la differenza principale la fa l'e...
05/06/2026

🇮🇹 Test banco prova.
Solo teste singole e scarichi, e infine centralina programmabile, la differenza principale la fa l'elettronica più evoluta.

🇬🇧 Dyno test.
Only single heads and exhausts, and finally a programmable control unit, the main difference is made by the more advanced electronics.

👉Project RSG500👈

12/05/2026

🇮🇹 Ricostruzione dischi acciaio RG500, confronto nuovo-vecchio.

🇬🇧 RG500 steel disc rebuild, new vs old.

Indirizzo

Montebelluna

Sito Web

Notifiche

Lasciando la tua email puoi essere il primo a sapere quando GRT Engineering pubblica notizie e promozioni. Il tuo indirizzo email non verrà utilizzato per nessun altro scopo e potrai annullare l'iscrizione in qualsiasi momento.

Contatta L'azienda

Invia un messaggio a GRT Engineering:

Scelte rapide

Condividi