Scuba Service Tools

28/08/2026

Master the Math: How to Calculate Torque Wrench Settings for Scuba Regulators

Master the Math: How to Calculate Torque Wrench Settings. Precision is everything in mechanical work. Tighten a fastener too little, and it shakes loose; tighten it too much, and you risk stripping threads or snapping bolts.

29/07/2026

Northern diver drysuit exhaust and inflator back plate tool

The Northern Diver drysuit exhaust and inflator back plate tool is a workshop tool designed for dive technicians servicing drysuit inflation and deflation systems.



https://www.scubaservicetools.com/product-page/northern-diver-drysuit-exhaust-und-inflator-back-plate-tool

18/07/2026

Si-Tech and Bare Drysuit tools

Service drysuit valves with our Si-Tech and Bare tools specifically designed for workshop use. With these tools, you remove and install inflation valves, exhaust valves, and backplates without risking damage.

https://www.scubaservicetools.com/si-tech-and-bare

08/06/2026

Apeks MTX-R and MTX cover tool

Streamline your regulator service routine with the dedicated Apeks MTX-R and MTX cover tool. Without a doubt, this custom-engineered key is the ultimate solution for opening the front covers of both Apeks MTX and MTX-R second-stage regulators.

https://www.scubaservicetools.com/product-page/apeks-mtx-r-and-mtx-cover-tool

19/02/2026

Hollis 6-pin environmental seal cap socket

This 6-pin 3/8"socket is used to open and close the environmental seal cap on the Hollis first stage.

https://www.scubaservicetools.com/product-page/hollis-6-pin-environmental-seal-cap-socket?currency=EUR

18/01/2026

Apeks seal cap socket for MTX-R and DB-4

The Environmental seal cap socket for the Apeks MTX-R and DB4 first-stage is used to remove and install the environmental seal cap (Apeks part # AP2010) on top of the Apeks MTX-R and the Apeks DB-4 first stage.

The tool incorporates a 1/2" Ratchet drive so it can be removed and closed with a torque or a socket wrench.

https://www.scubaservicetools.com/product-page/apeks-environmental-seal-cap-socket-for-mtx-r-and-db-4

23/12/2025

Desk mounted Resort Test bench

Introducing our desk-mounted Resort test bench, perfect for scuba testing and service equipment. This test bench comes equipped with a big intermediate pressure gauge and a Magnehelic Meter, all neatly housed in a versatile mounting base. Made of durable black powder-coated 304 stainless steel, this test bench is built to last and withstand the rigors of daily use in a scuba service shop.

https://www.scubaservicetools.com/product-page/desk-mounted-resort-test-bench?currency=

12/12/2025

Scubapro Mk11 diaphragm retainer torque C-spanner tool

This tool is used to tighten the retainer of the Mk11 first-stage regulator to the specified torque of 35 Nm.

https://www.scubaservicetools.com/product-page/scubapro-mk11-diaphragm-retainer-torque-c-spanner-tool

30/11/2025

Poseidon Jetstream and Xstream leak testing tool

The Poseidon Jetstream and Xstream leak testing tool enables an LP valve housing assembly to be easily pressurised and checked for leaks in a water bath outside the regulator body.

https://www.scubaservicetools.com/product-page/poseidon-jetstream-and-xstream-leak-testing-tool?currency=

21/11/2025

Aqualung cover ring tool set

This Aqualung cover ring tool set is a nice collection of 4 Aqualung second-stage cover tools.

This kit contains:
Second-stage cover ring tools for the Aqualung Core
Aqualung ABS octopus
Aqualung Mikron
Aqualung Legend I and Titan LX.

https://www.scubaservicetools.com/product-page/aqualung-cover-ring-toolset?currency=