JCG Guitar Shop

Llamar Contactar con la empresa

JCG Guitar Shop Una guitarra eléctrica es un instrumento de precisión.

Para obtener lo mejor de su guitarra o bajo y de usted mismo como intérprete, es importante que su instrumento esté configurado para adaptarse a su estilo de interpretación.

Ken Smith 6 string copy came in for string buzzing on the G and C strings. Did some spot leveling and some cleaning. Had...
18/08/2026

Ken Smith 6 string copy came in for string buzzing on the G and C strings. Did some spot leveling and some cleaning. Had to adjust the truss rod to set the action. For your electric bass and guitar needs give me a call at 787-501-6616

Fender Zone PJ Bass made in Mexico. It's a lighter and slimmer Bass with active electronics. This Bass is the same as th...
18/08/2026

Fender Zone PJ Bass made in Mexico. It's a lighter and slimmer Bass with active electronics. This Bass is the same as the Fender Lyte series made in Japan in the 90s. This Bass had an up bow in the neck that I was able to straighten out in the first try which almost never happens. It had a tone pot that needed replacement. Ended up with a very nice low action.

Fender MIM Stratocaster for fret job and a thorough clean and repair.
18/08/2026

Fender MIM Stratocaster for fret job and a thorough clean and repair.

Customer brought me this supposed Fender American bass neck to see if it was worth repairing. I told him I would accept ...
18/08/2026

Customer brought me this supposed Fender American bass neck to see if it was worth repairing. I told him I would accept it as a challenge just to see if it can be saved. The adjustment nut at the heel was broken and there was no way of turning it to remove the truss rod. After routing out the heel which was already damaged I was able to turn the truss rod to remove it. Besides the other obvious problems the headstock is at a 10-15 degree angle relative to the heel. I've clamped and added heat and weights and have it almost straight. This story will continue once the truss rod arrives

charvel late 80s Model 4 HSS guitar for complete rebuild and refinishing. This guitar had been sitting in a case for man...
18/08/2026

charvel late 80s Model 4 HSS guitar for complete rebuild and refinishing. This guitar had been sitting in a case for many years and all the steel components were badly rusted. The preamp wasn't working and the original Charvel tremolo was damaged. One of the adjustment screws on the bridge was locked besides being bent forward. Besides being totally corroded the tremolo was missing parts. An original used replacement is going for $200+. Was able to locate a new replacement preamp on eBay and bought a cheap Licensed Floyd Rose that had to be modified to accept the bigger Charvel block besides other mods. Had to fill in and install new posts for the bridge. The neck was in good condition and just needed fret level crown and polish. Resprayed the body by matching the original color. The neck was badly painted so I removed the old finish and recleared the back and headstock.

ken Smith 5 string bass came back to do a complete level, crown and polish. The client had brought it previously for a q...
18/08/2026

ken Smith 5 string bass came back to do a complete level, crown and polish. The client had brought it previously for a quick fret buzz on the D and G strings. This time I did a proper fret leveling. Low action no buzz.

Fender American Standard P Bass for string change and adjustment. Adjusted truss rod and set string height. The nut slot...
18/08/2026

Fender American Standard P Bass for string change and adjustment. Adjusted truss rod and set string height. The nut slots on the D and G strings were too low, the strings were practically on the frets. Tried the super glue and bone dust trick but it wouldn't hold so I replaced the nut and adjusted the height. The tuners were very stiff so I soaked them in Lithium spray grease and ran them back and forth with a drill. Now they are silky smooth. The pots were stuck so they had to be lubricated several times till they moved smoothly

P Bass Partscaster. Beautiful Warmouth ash body with Fender MIM replacement neck. Came in for string change and setup. T...
18/08/2026

P Bass Partscaster. Beautiful Warmouth ash body with Fender MIM replacement neck. Came in for string change and setup. There was a lot of corrosion beneath the neck plate. I carefully scraped the rust off and sprayed on some tinted varnish and rust treated the neck plate.

18/08/2026
Charvel Model 4 late 80s guitar for full restoration. The body and neck were resprayed. Customer had this guitar in a ca...
18/08/2026

Charvel Model 4 late 80s guitar for full restoration. The body and neck were resprayed. Customer had this guitar in a case for several years. When he decided to check on the guitar all the metal parts were corroded. The preamp board was damaged and no sound was coming out. I was able to locate a replacement preamp on eBay for a good price. The Charvel tremolo was severely corroded and missing parts. An original replacement is too expensive so I ordered a Chinese licensed Floyd Rose for a tenth of the price of a used original. It had to be modified to be able to use the original Charvel block. The posts had to be replaced because one was too rusted to be adjusted. Everything worked out great and the strings were replaced with Elixir brand. The neck and tuners were in good condition and just needed cleaning and adjustment. In the end the customer was pleased with the end result.

Dirección

Bayamon
00961

Teléfono

+17875016616

Página web

Notificaciones

Sea el primero en enterarse: le enviaremos un correo electrónico cuando JCG Guitar Shop publique novedades y promociones. Su dirección de correo electrónico no se utilizará para ningún otro fin y puede darse de baja en cualquier momento.

Contactar Con La Empresa

Enviar un mensaje a JCG Guitar Shop:

Atajos

Compartir