Tuned by Shawn

09/09/2026

This might seem like Déjà vu but we had another FD Rx7 come in for a in person dyno DRSC Automotive Inc. with essential the same setup with Haltech engine management system. The biggest difference on this build is an unopened stock motor with a 3 port mac valve and turbosmart actuator along with a more restrictive exhaust. We saw a bottleneck to start once we got to 20psi along with it not stretching it's legs as far as the other car. This will still feel like a rocketship with those stock wheel and tire size.

09/09/2026

Looking to know more about Haltech Generic CAN bus intergration? We have a blog for that! We look forward to helping people with this new to haltech integration with so many AMAZING possibilities!

Haltech Generic CAN gives Nexus ECUs and the iC-7 and uC-10 dashes a free, user-programmable CAN bus. Here is what it does, which hardware gets it, the limits, how to install the beta, and the misconceptions we are already hearing.

09/09/2026

We are offering a paid service for setting up Haltech Generic CAN (GCAN). We will add the provided CAN messages into the software to map them out to different functions within the ecu. We will also be providing a CAN sniff product that lets us see whats on an OEM bus and integrate it into the haltech products. This service would be used with Turbolamik, CANtcu, Zestek integrations. We look forward to working with you on your next CAN integration project.

09/04/2026

New owner made a couple upgrades on this FD Rx7 we built with our sister shop DRSC Automotive So we dialed in this Haltech Nexus s2 controlled Rx7 making 517rwhp / 393rwtq. I made a couple recommendions and he will be upgrading the actuator and boost solenoid to net some more low end tq that these EFR turbo chargers can produce. Stay tuned!

09/02/2026

We are having a close out sale on the Haltech Elite 550s! $1350.00 gets you a 4 cylinder / 2 rotor ecu package!

08/30/2026

We have 24 of these haltech elite 550s! Well they are $550.00 while supplies last. Get yourself into a 4 cylinder ecu for a close out prices!

08/30/2026

We wanted to show everyone our Haltech LS swap harness for the Mazda Rx8 Series 1. This is a plug n play solution that allows all factory Rx8 functions to work with a LS motor. Let us know how we can facilitate your next build. Note Series 2 Rx8 jumper will be available shortly stay tuned!

08/27/2026

The day has come! We are providing CAN support for the 2009+ Mazda Rx8 Series 2 chassis for Haltech Engine Management only! Our target market is going to be swaps rotary to piston allowing full factory functions still working. The price point on the 13b-msp is extremely expensive due to the hardware needed to control the engine. The 13b-rew can utilize the Haltech nexus s2 without omp control. Pm if you are interested in a pre-order!

08/24/2026

We have a "couple" Haltech Rebel LS ecu packages in stock ready to ship! Pair this with a IC-7 or UC-10 (also in stock) let us know how we can facilitate your next LS build.

08/20/2026