Sheets Welding and Machine

Sheets Welding and Machine Currently booked. Full time welding and machine shop that specializes in antique Harley-Davidson’s

Knucklehead neck that I reconstructed at my old shop. It had been shortened on the top, I had to make a new upper neck c...
09/04/2026

Knucklehead neck that I reconstructed at my old shop. It had been shortened on the top, I had to make a new upper neck cup area for it. I used one of my speedometer castings.

08/18/2026

Just finished moving out of my old shop of 25 years, it was a major job. Did a big downsizing, getting rid of some things I don’t really use anymore, hauled away 10,000 lbs of scrap. I’m very excited to get set up in my new shop and get back to work. This is some photos of the old space

Replaced the legs and neck stem on this springer. The legs had been previously replaced with silicon bronze on the botto...
04/24/2026

Replaced the legs and neck stem on this springer. The legs had been previously replaced with silicon bronze on the bottom of the springer tree and easily came off. I like to tig weld them together above the tree with a plug welded internal sleeve, then slide full length chevrons in and braze everything together like factory. I think it’s a much stronger way.

Needed wishbones for this Panhead frame repair, made up the dies to make them, the wishbones are made from .120” wall do...
04/03/2026

Needed wishbones for this Panhead frame repair, made up the dies to make them, the wishbones are made from .120” wall dom steel tubing. I have the 48-49 tubes for $250 a pair and the 50 and up tubes with the horn mount flats for $300

Address

Hagerstown, MD
21740-21749

Website

Alerts

Be the first to know and let us send you an email when Sheets Welding and Machine posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share