Infinity Flow 3D

Infinity Flow 3D Effortless automation for a seamless 3D printing experience.

08/14/2026

Why we use Glue Sticks on our printers.

08/12/2026

You don't need a massive collection of build plates. Running a full farm, we really only touch four:

• Smooth PEI for ASA (cleanest surface finish)
• Bambu Textured PEI for PLA (extra grip for tall parts)
• Cool Plate for ultra-sticky adhesion
• Engineering Plate for CF & technical filaments

08/10/2026

What are these on our build plates???

08/05/2026

Printer ran dry right at the end of a print because the filament got stuck on the spool. Whole print was ruined.

Literally built an auto-cutter to solve this exact issue and forgot to put one on this machine. Lesson learned, installed one right away.

08/03/2026

Power flickered for literally two seconds last night, but because it was 3 AM, every bed cooled down before we could hit resume. Woke up to a room full of scrap.

Working on a FlowQ feature to alert you when the entire farm drops offline so you can catch it in time. Would you want that notification, or just take the gamble?

07/31/2026

Clipping the factory bend off fresh spools is habit at this point. Wastes an inch of plastic, saves an entire print from a feeding jam.

07/29/2026

We get asked about this all the time, so here’s a look at how we handle air quality in our print farm. It’s not the most exciting part of running a farm, but it’s one of the most important.

07/27/2026

Losing a whole bed of parts to a tiny shift right at the end was driving me crazy.
Tying the tops together with a few sacrificial bridges kept everything locked in place while dropping the hardware in. Snaps off clean and completely fixed the issue.

07/23/2026

Thousands of hours, hundreds of automatically cleared prints, and we finally had our first major automation failure. The good news? Nothing broke. The bad news? We forgot one very important part of automation… emptying the bin. 😂

07/21/2026

Your print pauses for hours, the part cools completely, and when it starts again the layers don't bond. That visible line isn't cosmetic, it's a weak point.

Address

Indianapolis, IN

Website

Alerts

Be the first to know and let us send you an email when Infinity Flow 3D posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category