Plimpton Innovations

Home
United States
Saint Francis, MN
Plimpton Innovations

Plimpton Innovations designs and manufactures sensors and embedded systems. Engineered from the signal up.

Every unit is individually calibrated and tested before it ships, with its own calibration record tied to its serial number.

07/04/2026

03/04/2026

Its been quiet for too long…

All the weather data you would need from 4 wires: Motec, FT700 Series, Haltech, Holley, MaxxEcu, Emtron…

More to come in the following days 👀

06/29/2025

BLOWOUT SALE
Get 15% off ALL connector kits ONLY WHILE SUPPLIES LAST!
Discounts on several other components!

Use Code: CONNECT15
Sale ends July 6th!

https://www.plimptoninnovations.com/category/connectors

06/27/2025

Surface Temperature Stick-on Sensor, K-Type Thermocouple (24" lead)

After breaking a few "Bolt-on" surface temp sensors from vibration, we started testing these and now prefer them! Offered in 1" or 2" diameter, both performed the same while monitoring cylinder head/block temperature on several 4000+ HP Racecars.

Get 1" version now for just $25.00! (Sale ends July 6th)

https://wix.to/uTspB5B

06/27/2025

Limited Time Only: 15% OFF on Connector Kits & Select Components!

Use Code at Checkout ➡️ Connect15
Sale Ends July 6th!

ALL "Connector Kits" + other "Select Components" From our already aggressively priced product offerings!

11/04/2024

Proud to be part of this project, turned out amazing!

APV is proud to introduce, the General. Boasting an all aluminum constructed body, Dana 60 axles, Atlas 2 transfer case, Fox 2.5" Coilovers, long arm suspension, and a variety of LS engine options. Bringing the classic flat fender into the modern era.

The General has a few drivetrain options:
One Star - 6.2 LS producing 530 HP
Two Star - 7.0 LS producing 600 HP
Three Star - Supercharged 6.2 LS producing 700 HP
Four Star - Supercharged 7.0 LS producing 800 HP
Five Star - Custom Drivetrain

The General is unveiled in the booth #58059

Learn more about the resurrection of a classic at APVehicles.com

08/14/2024

This one is for BES Racing Engines: Custom Engine Dyno Box outfitted to run any Fueltech ECU for quite literally hundreds of different setups (engine, component, and sensor combinations)

In route for first ignition 🔥

05/27/2024

Twins! 👀

Engine Sensor Wiring Harnesses for BBNO$ Drag Race vehicles - prepped and awaiting final branch measurements to complete.

(29 wires/conductors ➡️ 5/16” diameter)

05/17/2024

G-meters and Weather Sensors back in stock and along with IGN1-A smart coil Connectors and boots!

05/04/2024

Driving this project across the finish line shortly; time to start covering and terminating!

Engine Dyno Harness/Stand for BES Racing Engines to support any/all Fueltech Customer combinations:
- FT450/550/600/700
- FT Spark/IGN1-A/MSD Spark/Distributor+Coil/Exc.
- FT Peak and Hold Pro(2) for Low Impedance or bypass for High Impedance (up to 16 Inj.) for EV1/EV14/Sumi/Exc.

Address

Saint Francis, MN

Website

http://www.plimptoninnovations.com/

Alerts

Be the first to know and let us send you an email when Plimpton Innovations posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.