11/09/2026
The Matrix EDF will be released in 3 versions and 2 colour schemes, we're starting to take pre-orders with delivery expected towards the end of the year, or early 2027.
6S and 8S EDF PNP, and MR (Motor Ready version for turbine conversion with no motor and ESC). There are then options to move to Vector Thrust in these configurations. If you want Vector Thrust and EDF, you’ll buy the Motor Ready version and then the 3D/Hover package.
6S PNP version $1049, preinstalled servos, and retractable landing gear, 6S plastic EDF, 6S 130A ESC (with reverse-brake function). Includes wing bag. ESC has forwarding programable functions and telemetry which works with SBUS2/EX BUS/SRXL2/CRSF/S.port protocols. The telemetry includes: Battery Voltage/Current/Power/Consumption, BEC Current/Consumption/Voltage, Motor RPM. The ESC comes with a Temperature Sensor.
8S PNP version $1149, preinstalled servos, and retractable landing gear, 8S 1650KV aluminium EDF, 8S 130A ESC (with reverse-brake function). Includes wing bag. ESC has forwarding programable functions and telemetry which works with SBUS2/EX BUS/SRXL2/CRSF/S.port protocols. The telemetry includes: Battery Voltage/Current/Power/Consumption, BEC Current/Consumption/Voltage, Motor RPM. The ESC comes with a Temperature Sensor.
MR version (Motor ready) $949, preinstalled servos, and retractable landing gear. Includes wing bag. Without ESC and EDF.
** No warranty should you choose from the good times below:
(Pilot RC will not take responsibility if the customer flies the 90mm EDF Matrix with a Turbine, or the 3D/Hover package.)
Turbine conversion kit with normal tail pipe $525, includes the E-brake wheels, E-brake controller, 6V BEC, the normal tail pipe, a 780ml fuel bag, turbine mounting wood plate, precut heat-resistant plate, and foam glue.
Turbine conversion kit with vector tail pipe $799, includes the E-brake wheels, E-brake controller, 6V 8A BEC, two PY-07AH servos with extension wires for vector thrust operation, the vector tail pipe, a 780ml fuel bag, turbine mounting wood plate, precut heat-resistant plate, and foam glue.
3D/Hover package for 90EDF Matrix $499, includes rear fuselage with vector tail nozzle for EDF version, and vector servos. 1pc 90mm Aluminium Ducted Fan (12-blade) with 4075-KV1850 inner runner motor (6-8S), 1pc P13OTLM-8 130A ESC for 8S, with telemetry. High flow air intake painted bottom cover.
This package with the Motor Ready version plane can fly 3D/Hover, but it is important to set a telemetry warning for the ESC temperature, and not exceed 140 degrees Celsius during the flight, or the ESC/motor may burn. For this reason, this package is without warranty.
