MarineWare

MarineWare Supplier of a growing range of coatings, epoxies, abrasives and consumables for professionals & DIYs.

SECURE INTERIOR PANELS & UPHOLSTERY WITH FASTMOUNTFastmount®™ has developed a wide range of mounting systems for marine ...
10/09/2026

SECURE INTERIOR PANELS & UPHOLSTERY WITH FASTMOUNT

Fastmount®™ has developed a wide range of mounting systems for marine applications. From deckheads to access panels, carpets to cushions, there are specific Fastmount clips for the job.

To choose the right clip, Fastmount has documented case histories of leading boatbuilders - from wake boats to superyachts, with the specific clip system itemized online.
https://fastmount.com/sectors/marine/

Four mounting wall or overhead panels, deck cushions or carpets, the award-winning Fastmount range has a solution.

Then when you want to source the clips you need, that’s easy too, call MarineWare:
https://marineware.com.au/fastmount

MORE STRENGTH, LESS WEIGHT, COOSA BOARD IS HEREThe arrival of Coosa Composite Board at MarineWare is truly exciting. Coo...
03/09/2026

MORE STRENGTH, LESS WEIGHT, COOSA BOARD IS HERE

The arrival of Coosa Composite Board at MarineWare is truly exciting. Coosa Board is a composite panel solution for transoms, stringers, bulkheads, decks, hatches, rod holders and more.

Being a composite of closed-cell foam & fibreglass, it has excellent rigidity & reliability. It will not rot, swell, or delaminate when exposed to water. 30-60% lighter than plywood, it drastically reduces weight & potentially fuel consumption.

It has excellent screw retention and insulation properties up to 2-3 times greater than plywood. You can drill it, shape it, cut it, paint it – but you can’t beat it. Remember to always wear a mask.

Coosa Composite Board comes in two constructions. Bluewater 26 features a high-density, closed-cell polyurethane foam core heavily reinforced with woven roving and continuous strand fibreglass for demanding applications.

Bluewater 20 is manufactured from high-density, closed-cell polyurethane foam reinforced with continuous strand fiberglass for less-structural & non-structural use.

MarineWare currently offers:

12.7mm Coosa Bluewater 20 2440 X 1220mm (320kg/m3)
15.9mm Coosa Bluewater 20 2440 X 1220mm (320kg/m3)
19mm Coosa Bluewater 20 2440 X 1220mm (320kg/m3)
19mm Coosa Bluewater 26 2440 X 1220mm (420kg/m3)
25.4mm Coosa Bluewater 26 2440 X 1220mm (420kg/m3

For marine repairs, for new builds, it’s a game changer. Contact MarineWare to find out more about its strengths.

https://marineware.com.au/coosa-board

READY WHEN YOU AREAs the pace is picking up getting vessels ready for summer, MarineWare is in a good place to meet the ...
26/08/2026

READY WHEN YOU ARE

As the pace is picking up getting vessels ready for summer, MarineWare is in a good place to meet the demand.

Our Coomera QLD branch is positioned on the Gold Coast City Marina. Right in the heart of the major boating precinct of SE Queensland, close to hundreds of marine businesses and thousands of boats on marinas, on jetties and on trailers.

Our Rozelle NSW branch in Rozelle is close to Sydney’s leading marine businesses, the superyachts of Blackwattle Bay, and key marinas like Birkenhead Point, Rushcutters Bay and beyond.

With increased stocks of critical supplies and more vans on the road, you’ll get the right brands, right products, right on time.
www.marineware.com.au

13/08/2026

When you're renewing your antifouling, check out our range of colours at MarineWare and consider the possibilities.

CAN ANTIFOULING ALSO ADD THE WOW FACTOR?Antifouling is an absolute necessity for protection & performance. But can it al...
13/08/2026

CAN ANTIFOULING ALSO ADD THE WOW FACTOR?

Antifouling is an absolute necessity for protection & performance. But can it also complement a boat’s aesthetics?

While antifouling is largely submerged, it can still complement or contrast with the colour of the hull & topsides.

To help you, check the Awlgrip 3D Colour Visualizer to see how various colour combos can look:
https://www.awlgrip.com/asia-pacific/colors/customize

MarineWare stocks a wide range of antifouling products - in a range of colours. In fact, some boat owners alternate the colour to track the wear of their antifouling.

Naturally you need to consider compatibility of the antifouling with the previous coating. Don’t tint antifouling – it can affect the biocide properties.
https://www.international-yachtpaint.com/gb/en/boat-paint-help/expert-advice/mixing-colors

Then, check out our range of coatings and consider the possibilities:
https://marineware.com.au/paints-and-coatings

MARINE TECHNOLOGY IN SPORTWhen cyclists competed at the Velodrome at Glasgow Commonwealth Games, some of the biggest nam...
03/08/2026

MARINE TECHNOLOGY IN SPORT

When cyclists competed at the Velodrome at Glasgow Commonwealth Games, some of the biggest names in composites were on display.

One name you saw spinning on the disc wheels was ‘Southern Spas’. The company leverages its carbon fibre technology used for high-performance spars, “…to create wheels that not only enhance cycling performance but also provide exceptional strength and durability.”

Since 2016, Southern Spas has been the official wheel supplier to Cycling New Zealand. They say, “Leveraging our unique expertise in lightweight, high-strength materials, we custom made wheels that deliver superior aerodynamics, speed, and stability, key factors in competitive cycling.”

https://southernspars.com/discover-carbon-fibre/

They’re not the only composites innovator in sport. Cycling showcases composites technology from names like car maker Lotus (UK team), and leading European and Asian manufacturers. While the games are over, the pursuit of excellence continues.

MarineWare admires the pursuit of performance, speed, strength and advancing technology, whatever route it takes. Whatever you’re building, we may have the composite materials you need:
https://marineware.com.au/products

SOME WEEKEND INSPIRATION TO KEEP YOU GOINGWhen you’re deep into a repair, restoration or refinishing project, sometimes ...
31/07/2026

SOME WEEKEND INSPIRATION TO KEEP YOU GOING

When you’re deep into a repair, restoration or refinishing project, sometimes it’s hard to see the wood for the trees.

So it’s nice to remind yourself how good the project’s going to look after all the filling, sanding, priming and spraying. Here are a few projects finished with Awlgrip.

When it comes to sourcing the right Awlgrip products, that’s the easy part. Call MarineWare.
https://marineware.com.au/awlgrip-sea-hawk

23/07/2026

BOND DISSIMILAR MATERIALS WITH WEST SYSTEM G/FLEX

West System’s online resource 'Epoxyworks' has some excellent tutorials on how to tackle some challenging jobs.
https://www.epoxyworks.com/repair-a-keel-with-gflex-epoxy/

Recently, a boat owner asked about repairing his cast-iron wing keel. After looking at the boat, the West System technical team recommended using G/flex® Epoxy.

G/Flex is a toughened epoxy, viscous enough not to drain out of a joint, and resilient enough to absorb the stress of expansion, contraction, shock and vibration.

G/Flex can bond materials including aluminium and other metals, plastics, fibreglass, ceramic, masonry, glass, damp wood, difficult-to-bond wood species and more. The result can be a strong, durable bond.

MarineWare stocks an extensive range of West System products that deliver incredible results:
https://marineware.com.au/west-system

WE’RE STRONG ON FIBREGLASS MATERIALSMarineWare has a wide range of fibreglass reinforcement cloths, to give you the weig...
15/07/2026

WE’RE STRONG ON FIBREGLASS MATERIALS

MarineWare has a wide range of fibreglass reinforcement cloths, to give you the weight & weave you need. Selecting the right cloth is vital to the success and strength of your project. So MarineWare stocks:

- Chopped Strand Mat – by the roll or the metre
- Emulsion Bound - 225, 300, 450 & 600gsm
- Plain Weave – 120, 200 & 300gsm
- Double Bias & Multi Axial
- Other Multi-Axials on request - and much more

Plus, with the growing need for carbon materials, our range is growing as well. Check out our range, tell us your needs, let us bring you the right products, right on time.
https://marineware.com.au/fibreglass-cloth

GURIT FIRST ABOARD ELECTRIC FERRIESGurit is collaborating with some innovative builders of zero-emission commercial ferr...
09/07/2026

GURIT FIRST ABOARD ELECTRIC FERRIES

Gurit is collaborating with some innovative builders of zero-emission commercial ferries. And soon, the cities of Sydney and Perth will be benefitting from these radical vessels.

One of the big issues with electric ferries is reducing weight. Take the 132 passenger ‘East by West’ ferry operating in Wellington NZ since 2021. Powered by 5½ tonnes of Lithium-ion batteries, its construction must not only be lightweight, but also durable enough to withstand unpredictable marine conditions. So Gurit stepped in.

Another vessel - the 10-seater Vessev VS–9 - has been operating since Jan 2025 on Auckland harbour. It’s the first time that an electric hydrofoiling vessel, certified for commercial use, has been used in a tourism application anywhere in the world.

Skipper Jeremy Rei, who's also sailed conventional ferries for years, says “once we’re up on the foils, it feels like flying”.
https://www.vessev.com/vessels/vs-9

Gurit was also heavily involved with supplying materials to the two 24m. EV Maritime-designed ferries built by McMullen & Wing, carrying 200 passengers at 23-25knots.
https://www.gurit.com/ev-maritime-launches-first-fully-electric-ferry-with-gurit-composite-solutions/

The vessels are part of EV Maritime’s wider mission to reduce maritime emissions and deliver cleaner, quieter, and more efficient public transport options on the water.

Gurit’s role in this project highlights how composite material innovation can make this mission a reality. Their lightweight properties directly enhance the energy efficiency of electric propulsion, while their strength and durability ensure reliable performance in demanding marine environments.

EV Maritime’s latest project is building the first battery-electric ferries for Perth.

https://www.boatingnz.co.nz/2026/07/aucklands-ev-maritime-lands-role-in-perths-new-electric-ferry-fleet/

Closer to home, Sydney Harbour is set to host trials of electric hydrofoiling vessel technology following an agreement between Vessev and project partners developing a future water transport network for the city.

Whatever you’re building, our Gurit range including AMPRO™ epoxies could be just what you need:
https://marineware.com.au/resins-gelcoats

Address

18b Robert St. Rozelle NSW & Unit B9 76-84 Waterway Drive QLD
Coomera, QLD
4209

Opening Hours

Monday 7:30am - 4:30pm
Tuesday 7:30am - 4:30pm
Wednesday 7:30am - 4:30pm
Thursday 7:30am - 4:30pm
Friday 7:30am - 4pm

Telephone

+61755028966

Website

Alerts

Be the first to know and let us send you an email when MarineWare posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to MarineWare:

Shortcuts

Share

Category