Thomson Gunsmithing and Precision Rifles

Thomson Gunsmithing and Precision Rifles Thomson Gunsmithing & Precision Rifles provide a wide range of high quality gunsmith and custom fire

07/04/2020

The AOS bags are fantastic and we have a range of the Larger 59-63” bags in stock and ready to go.
Top local product!

23/11/2019

Mark and Sam running in a 300 PRC we barrelled up Last week.

GC Precision Chassi
Trued Rem 700 action with custom bolt k**b.
Krieger 1/9 29 inch Barrel fitted with a Mark and Sam supplier Brake.

Kimber 8400 custom 404 Jeffery’s This Kimber started as a 338 Win Mag. The action, bolt and magazine were modified to fi...
16/08/2019

Kimber 8400 custom 404 Jeffery’s
This Kimber started as a 338 Win Mag. The action, bolt and magazine were modified to fit the 404 round, a new custom bolt k**b fitted, Swan Barrel and NECG sights fitted. A blind cap and muzzle brake is also fitted.
The stock is exhibition grade English walnut carved in house with an ebony fore end fitted. The checkering on the stock was completed by Ken Davis.

The rifle was finished in graphite black Cerakote to protection.

A classic big game rifle.

300 RUM built with a Defiance Deviant, Maddco 1/10 twist, JAE stock, Trigger Tech Diamond. The cerakote with flutes high...
18/07/2019

300 RUM built with a Defiance Deviant, Maddco 1/10 twist, JAE stock, Trigger Tech Diamond.
The cerakote with flutes highlights was used to compliment the polished receiver raceway.
The rifle included a custom brake and muzzle cap.

A snapshot of several customized pistols from the past 12 months.
18/02/2018

A snapshot of several customized pistols from the past 12 months.

Christmas came early on Thursday with the first of the Big Horn Actions arriving from the US.  These actions are outstan...
27/05/2017

Christmas came early on Thursday with the first of the Big Horn Actions arriving from the US. These actions are outstanding quality and offer some unique features not found on other Rem 700 footprint actions. Floating/interchangeable bolthead allows for multiple calibre options, controlled round feed and mechanical ejector are just a few of the key features. Give us a call if your interested in a build on one of these actions as we only have limited numbers as they are flying off the shelf in the US.

Custom Lone Peak Titanium- Carbon fibre 300 Win Mag.This rifle is built on a Lone Peak Fuzion Ti action with a melonite ...
09/04/2017

Custom Lone Peak Titanium- Carbon fibre 300 Win Mag.
This rifle is built on a Lone Peak Fuzion Ti action with a melonite coated spiral fluted bolt with a Jewell HVR trigger. The action is fitted to a Hardy Engineering Carbon Wrap, Rem Varmint profile barrel and sits is a Kiwi Composite carbon fibre stock.
A Terminator T3 break was fitted to reduce felt recoil and an Accurate Mag CIP length DBM was inletted to enable the use of VLD projectiles in a detachable magazine. All metal work was finished in the new Cerakote Elite Midnight. This finish is fantastic, super smooth and harder wearing than any other cerakote.
A set of Warne Mountain tech rings were chosen to round out the lightweight build at 2.3kg. Fitting the Swarskoski Z6 scope raised the total rifle build weight to 3.4kg.

Custom 338 Norma MagnumThis build used a Weatherby Mark V action as a base.  The boltface was opened out to fit the 338 ...
12/02/2017

Custom 338 Norma Magnum
This build used a Weatherby Mark V action as a base. The boltface was opened out to fit the 338 Norma Mag case and was fitted to 26" Lilja No.4 profile fluted barrel. A TGPR custom break was used to tame the light rifle which reduced recoil to approximately that of a .243 Win.
A Bell and Carlson stock was modified and bedded to ensure a perfect stress free fit.
The complete rifle with scope weighed 3.8kg.
Proof testing the rifle showed consistent 3 round groups between 1/4 and 1/2 MOA.

R***r 77 Mk11 .243 Win, Semi CustomA stunning blend of steel and wood and a change to our tactical builds.  The action a...
17/12/2016

R***r 77 Mk11 .243 Win, Semi Custom
A stunning blend of steel and wood and a change to our tactical builds. The action and bolt were lapped and the reciever face was cut true to the raceway and the trigger was worked. A Hardy Engineering spiral fluted barrel with a 8/1 twist with a T3 muzzle break fitted prior to the metal work being bead-blasted.
The barrel channel on the stock was opened to fit the new profile, bedding and stainless steel pillars fitted with a few blemishes removed to make it look as good as when Ken Davis made the stock.

Cutsom 7mm Re*****on Magnum build. This build was on a Stiller Tac 300 fitter to a Hardy Engineering 26" spiral fluted, ...
03/12/2016

Cutsom 7mm Re*****on Magnum build.
This build was on a Stiller Tac 300 fitter to a Hardy Engineering 26" spiral fluted, 1 in 8 twist barrel with a Terminator T3 break fitted.
The rifle sits on GC Precision chassi and is cerakoted to match the OD green with black highlgiht theme of the rifle.
The 5 round test target was shot at 100m with a 160g Nosler CT, and demonstrates the 1/4 MOA potential of the rifle.

Address

Toodyay Road Gidgegannup
Perth, WA
6083

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+61409531912

Alerts

Be the first to know and let us send you an email when Thomson Gunsmithing and Precision Rifles posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Thomson Gunsmithing and Precision Rifles:

Share

Category