Lu's 3D

07/08/2026

It's finally the weekend! 🍻

To celebrate, we're giving you 10% OFF storewide until midnight Sunday.

We've also just launched our new Discovery 2 Roof Grab Handles, printed in tough ASA-CF and available with the Discovery logo or a clean plain finish. They're a direct replacement for your originals and built to last.

Use code WEEKEND10 at the checkout to save 10% across the entire store.

👉 Shop now: www.lus3d.com

As always, thanks for supporting a small Australian business – we've got plenty more new products on the way!

02/08/2026

💥 Payday Sale is On! 💥

To say thanks for all the support, I’m giving 15% OFF storewide until midnight tonight!

Just use code PAYDAY15 at checkout to save on everything across the website.

If you’ve had your eye on something, now’s the perfect time to grab it.

🛒 https://lus3d.com

Offer ends midnight tonight.

23/07/2026

It’s finally here!

After plenty of testing, our new Discovery 2 Centre Console Tray is now available.

Designed as a simple drop-in upgrade, it’s the perfect way to make better use of the centre console and keep those everyday bits and pieces organised. No cutting or modifications required—just drop it in and you’re good to go.

Like all of our products, it’s 3D printed to order in durable, UV-resistant ASA and is available in a range of colours.

As always, I’d love to hear what you think and what you’d like to see next!

👉 https://lus3d.com

18/07/2026

🎉 24 Hour Thank You Sale! 🎉

To say thanks for all the support over the last few months, we're running a 24-hour flash sale!

🔥 10% OFF everything on the website!

Whether you've been eyeing off a new set of Cup Holders, Rear Bumper Corners, Switch Panels or any of our other Discovery upgrades, now's the perfect time to grab them.

Just use the code:

SAVE10

at checkout.

⏰ Ends tomorrow at midnight (AEST)

🇦🇺 Designed & manufactured in Australia
🌍 Shipping worldwide
🚙 Built by Discovery owners, for Discovery owners

👉 Shop now: https://lus3d.com

As always, thank you for supporting a small Australian business. Every order genuinely helps us keep designing new products for the Discovery community. 💙

15/07/2026

Today we hit order #197 — honestly, unreal.

That means we’re now only 3 orders away from our next $100 site cash giveaway.

Everyone who placed an order from #101 through to #200 will be included in the draw, and one winner will receive $100 store credit to use on the website.

Thank you again for all the support. I genuinely can’t believe how quickly Lu’s 3D has grown.

07/07/2026

Our Discovery 2 rear bumper corners. A 12hr print transformed into a 20 second timelapse. https://lus3d.com

29/05/2026

We honestly can’t believe how much the Lu’s 3D website has taken off over the last few weeks.

What started as a small side hobby has very quickly turned into something much bigger, and we’re so grateful for every order, message and bit of support.

We’ve been expanding the printing setup to keep up with demand, and we’ll be adding even more soon so we can start producing larger parts too.

Thank you again for all the support — it really does mean a lot.

12/05/2026

Just wanted to say a massive thank you to everyone in the Discovery community who has supported Lu’s 3D over the last few weeks.

Three weeks ago, this was just me printing a few parts for my own Discovery 2 and seeing if anyone else might find them useful. Since then, the support, orders, messages, ideas and feedback have been absolutely unreal.

Things have grown quicker than I expected, and I’ve now had to invest in a third printer just to help keep up with orders. It’s still a small setup, but it’s growing, and that is genuinely because of the support from groups like this.

I’m mainly focusing on practical 3D printed parts for the Discovery 1 and 2 — the sort of bits that are hard to find, broken, missing, or could simply be improved. I’ve already got more parts in development, and I’m always open to suggestions from other owners.

As a little thank you, I’m running a group offer for the next week:

Use code THANKYOU10 for 10% off

Website: lus3d.com

Thanks again to everyone who has ordered, shared, commented, or sent through ideas. It genuinely means a lot, and I’m excited to keep making more useful parts for these old Land Rovers.

Custom 3d printing service and parts

07/05/2026

🚀 A New Chapter for Lu’s 3D 🚀

What started as a small idea making personalised pet products has grown into something much bigger than we ever imagined — and we honestly couldn’t have done it without all of your support 💙

Over the last few weeks, you may have noticed some changes to the page as we’ve been working behind the scenes on a full rebrand and restructure.

We’re excited to officially introduce Lu’s 3D — our new website and brand bringing all of our 3D printing projects together under one roof.

Alongside the personalised pet products you already know us for, we’ll now also be specialising in:
🔧 3D printed automotive parts
🐾 Pet accessories & personalised products
🎨 Custom 3D printing projects

And don’t worry — we are absolutely still producing pet items and we’ve got plenty more planned to be added to the website over the coming weeks and months 🐶

This is just the beginning for us and we’re incredibly excited for what’s ahead.

Thank you to everyone who has supported us so far — whether you’ve placed an order, shared a post, visited us at an event, or simply followed along with the journey. It genuinely means a lot to us.

Lots more to come soon 👀

Officially introducing

Custom 3d printing service and parts

23/04/2026

🐾 A little update from us at Lu’s Tags 🐾

Over the past few months, what started as a small idea has grown more than we ever expected — and that’s all thanks to your support 💙

Because of that, we’re now taking the next step and bringing everything together under one roof with our new Lu’s 3D website.

This means over the next couple of weeks you might notice a few changes here and there as we start to rebrand and restructure.

Don’t worry — we’ll still be doing everything you know us for (and more!), this is just the beginning of something bigger.

We’re really excited about what’s coming next and we just want to say a massive thank you to everyone who has supported us so far — whether you’ve ordered, shared a post, or sent us a photo of your dog 🐶

We couldn’t have got here without you.

Lots more to come soon 👀