Double Duty Diesel

Double Duty Diesel Performance parts for the diesel enthusiast

Yep , think this confirms Bushdoof Lighting has something big planned. Nothing but the best headed to Western 🇦🇺. Power ...
05/08/2026

Yep , think this confirms Bushdoof Lighting has something big planned. Nothing but the best headed to Western 🇦🇺. Power Driven stage 3 pushrods, conical springs, delivery valves and more, coltcams stage 4 cam and tappets, Pureflow Airdog 220 gal kit for all the fuel , Dynomite Diesel stage 4 injectors , Fluidampr 6bt damper to keep vibration under control and MAHLE USA gaskets to keep it all sealed up 💪💪👌

Yep , think this confirms Bushdoof Lighting has something big planned. Nothing but the best headed to Western 🇦🇺. Power ...
05/08/2026

Yep , think this confirms Bushdoof Lighting has something big planned. Nothing but the best headed to Western 🇦🇺. Power Driven stage 3 pushrods, conical springs, delivery valves and more, coltcams stage 4 cam and tappets, Pureflow Airdog 220 gal kit for all the fuel , Dynomite Diesel stage 4 injectors , Fluidampr 6bt damper to keep vibration under control and MAHLE USA gaskets to keep it all sealed up 💪💪👌

Exhaust fl**ge stock just arrived - spacers for T3 & T4 , along with T4 to 3” pipe, HX35 to 3” - lots more available hit...
04/08/2026

Exhaust fl**ge stock just arrived - spacers for T3 & T4 , along with T4 to 3” pipe, HX35 to 3” - lots more available hit us up with what you need for your Cummins swap 👊👊

Customer in his 2500 Ram looking for to extend mileage on front hub replacement - Riffraff Diesel® has the answer with f...
04/08/2026

Customer in his 2500 Ram looking for to extend mileage on front hub replacement - Riffraff Diesel® has the answer with front ABS greasable fitting , more grease in the hub so they cannot run dry 👌easy fit , grease and replace ABS sensor and more mileage from front hubs , we now have these in stock 🇦🇺

Fluidampr - Ideal for competition and for owners who depend on their work truck.By installing a Fluidampr viscous damper...
30/07/2026

Fluidampr - Ideal for competition and for owners who depend on their work truck.

By installing a Fluidampr viscous damper you will:

✅ Reduce wear on the main bearings
✅ Reduce wear on the timing gear
✅ Achieve more accurate valvetrain operation
✅ Lower the risk of crank failure

Unlike rubber based dampers, Fluidampr automatically adapts to your modifications, then continuously self-tunes in real time to optimum damping at both peak levels and across a broad changing frequency range 🤘🏻

We have a range of Fluidampr products in stock and ready to ship - hit the link in our bio to shop now 💸

Some of the steps we complete to get you Cummins 6BT head O Ringed and ready for more Boost 😊. Cutting ring depths for c...
30/07/2026

Some of the steps we complete to get you Cummins 6BT head O Ringed and ready for more Boost 😊. Cutting ring depths for correct wire protrusion, can see in pic 2 wire installed vs cut groove, pic 3 all complete - this came out beautiful and finally a little vid showing the porting job on this one headed to South 🇦🇺 ready to make big power with the stage 4 coltcams it shipped with

Power Driven tools to make working on and modifying your Cummins 6bt easy - this set is headed out to Queensland 🇦🇺 toda...
30/07/2026

Power Driven tools to make working on and modifying your Cummins 6bt easy - this set is headed out to Queensland 🇦🇺 today

Kingspeed knocked it out of the park with this 12 valve Cummins cover - amazing detail! Think Bushdoof Lighting in West...
29/07/2026

Kingspeed knocked it out of the park with this 12 valve Cummins cover - amazing detail! Think Bushdoof Lighting in Western 🇦🇺 where it is headed have something special in the works 😉

MAHLE USA upper gasket kit for a 2007.5-2018 Cummins 6.7 on its way to Queensland 🇦🇺 today - need quality gaskets for C...
24/07/2026

MAHLE USA upper gasket kit for a 2007.5-2018 Cummins 6.7 on its way to Queensland 🇦🇺 today - need quality gaskets for Cummins we have them in stock 😁👍

Steed Speed Manifolds are CNC machined from 1018 mild steel billet and finished in a satin black Tech-line Coating - not...
23/07/2026

Steed Speed Manifolds are CNC machined from 1018 mild steel billet and finished in a satin black Tech-line Coating - not your average cheap cast or tubular manifold.

Engineered for serious performance, the Tech-line coating is designed to handle temperatures up to 1700°F continuously and up to 2000°F for short periods.

When it comes to quality, durability, and flow, Steed Speed builds some of the finest manifolds on the planet 🪐

In stock and ready to ship! 📦

Address

Shelly Beach, NSW

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 5pm

Telephone

+61439584566

Website

Alerts

Be the first to know and let us send you an email when Double Duty Diesel posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Double Duty Diesel:

Shortcuts

Share