Northern Steam Supply

Northern Steam Supply We specialize in crafting precision-scale models of locomotive steam auxiliary equipment.

Just recently completed this 1.5" scale Sellers Type KS boiler check and stop valve.This is a fully functional scale rep...
09/28/2026

Just recently completed this 1.5" scale Sellers Type KS boiler check and stop valve.

This is a fully functional scale reproduction, designed to operate just as the original valve did.

Just finalizing the CNC programming. The model shown in the picture is manually machined. The stop valve assembly will be either SS or Bronze.

I’ll have these available soon and will share drawings.

This is a Sunbeam 1018 in 2.5" scale. The “18” in the model number indicates that the full-size headlight was equipped w...
09/03/2026

This is a Sunbeam 1018 in 2.5" scale. The “18” in the model number indicates that the full-size headlight was equipped with an 18" reflector.

One of the interesting challenges with this model was recreating the different fixtures used to mount the reflector lid, as well as the number boards. Getting those details right made this a particularly enjoyable piece to make.

Continuing with the 2.5" scale models, a Pyle National C-230 and a Sunbeam 4414 headlight.Although these headlights were...
07/13/2026

Continuing with the 2.5" scale models, a Pyle National C-230 and a Sunbeam 4414 headlight.

Although these headlights were originally produced by two different companies, Pyle National later became the successor to Sunbeam's railroad lighting and turbo generator product line. Following Sunbeam's 1945 merger into Seeger-Sunbeam Corporation, the railroad equipment business appears to have been transferred to Pyle National, most likely between 1946 and 1949. While no official acquisition announcement has surfaced, surviving documentation, including full size turbo generators bearing Pyle National–Sunbeam identification, strongly suggests that Pyle assumed ownership of the Sunbeam line.

Here’s a 2.5" scale Pyle National E2 turbo generator. It’s always interesting to see the finer details that become visib...
07/08/2026

Here’s a 2.5" scale Pyle National E2 turbo generator. It’s always interesting to see the finer details that become visible on the larger scales. On this example, you can just make out the “Use Medium Oil” lettering on the two oil caps.

Wishing everyone a safe and joyful 4th of July, honouring 250 years of freedom!Here is a photograph of United States Ste...
07/04/2026

Wishing everyone a safe and joyful 4th of July, honouring 250 years of freedom!

Here is a photograph of United States Steel M-L Division No. 124 in Rogers City, taken on June 27, 1978. Photo by J. Benson.

Pyle National Type TSLC backup lights, available in both the single-lens and triple-lens configurations. The triple-lens...
06/09/2026

Pyle National Type TSLC backup lights, available in both the single-lens and triple-lens configurations.

The triple-lens version features two lower lenses designed to illuminate the coupler and grab irons, just like the prototype.

Wiring may be specified to exit on either the left or right side of the housing. The primary lens can be furnished with either a red or warm white LED. In the triple-lens configuration, the two lower lenses are illuminated by a separate warm white LED.

$350 - RTR.

05/09/2026

Steam test of the 3.75" Scale Pyle National E2. The dynamo performed flawlessly at 55-65PSI. Minimal whine but enough to create the effect of the prototype.

Last clip shows the dynamo charging a 12V motorcycle battery using a wind turbine controller.

Pyle National Type CL Classification Lights in 1.5" Scale. This 1.5" scale model is built using individual castings just...
04/27/2026

Pyle National Type CL Classification Lights in 1.5" Scale.

This 1.5" scale model is built using individual castings just like the original, including a fully functional hinged door. It features a true Fresnel lens and is powered by a 12V warm white LED, delivering a soft, prototypical glow.

Offered as a pair, these are the most common style used on NA locomotives.

Minimum of 15 pairs required to proceed with this casting run due to the small, intricate nature of the components. To be part of this order, please send me a DM.

Cost is $200 per pair(including brackets) RTR - shipping included.

04/22/2026

Test run of the 2.5" scale MO-6. Also showing the special semiquincentennial headlight made in celebration of America’s 250th anniversary.

Here is a completed 2.5" scale MO-6 turbo generator built for a client. The MO-6 represented the pinnacle of turbo gener...
04/20/2026

Here is a completed 2.5" scale MO-6 turbo generator built for a client. The MO-6 represented the pinnacle of turbo generator technology for Pyle National, and its design reflects a remarkable level of engineering complexity. This model is an exact external replica of the full-size unit, reproducing all individual body components, including the ornate rear bearing housing, which remains hidden beneath the generator housing lid.

Adresse

Montreal, QC

Site Web

Notifications

Soyez le premier à savoir et laissez-nous vous envoyer un courriel lorsque Northern Steam Supply publie des nouvelles et des promotions. Votre adresse e-mail ne sera pas utilisée à d'autres fins, et vous pouvez vous désabonner à tout moment.

Raccourcis

Partager

Type