3D Printing by Gabriel's Heart Creations

3D Printing by Gabriel's Heart Creations Custom Designed 3D Printed Items
Created by us in our home studio in Winnipeg, MB Canada

Looking good in white. Order going out the door in a couple of days.**INK REFILL STAND**- holds 24 ink refill bottles- f...
07/17/2026

Looking good in white. Order going out the door in a couple of days.

**INK REFILL STAND**
- holds 24 ink refill bottles
- fits Stamping Up ink refill bottles
- also fits other brands of ink refill bottles
- tiered and offset to make it easy to see the names or to remove/ replace bottles
- many colour choices available
- 2.5" High x 5.6" Deep
- Width at the front is 5.7", Width at the back is 8.6"
$25
Note: This stand will come empty - no ink refill bottles will be included
**Pick up is in Linden Ridge, Wpg, MB
- Made in Canada
- Custom designed & 3D printed by us in our home studio/office in Wpg, MB
Please contact us with any questions. See less

07/15/2026

---I needed to post this separately..........how to remove the sliding clip from the Washi Tape Holder/Dispenser

Introducing our newest product.....
*** A WASHI TAPE HOLDER/DISPENSER*** (with a serrated edge on both sides to cut your Washi Tape)
- also has a sliding clip to keep washi tape securely in place - this can easily be removed if you fill up the trays & don't need to use the clip
- dimensions: 9 3/8"L x 4.5"W x 1 1/8" H
- fits rolls up to 1.97" in diameter
- will hold 30 - 5/8" wide washi tape, or 18 - 1" wide washi tape, or 4 - 4" wide washi tape.........or a mix up the sizes you have
- multiple colours available
$15.50
Note: washi tape is not included
**Pick up is in Linden Ridge, Wpg, MB
- Made in Canada
- Custom designed & 3D printed by us in our home studio/office in Wpg, MB
Please contact us with any questions.

Introducing our newest product.....*** A WASHI TAPE HOLDER/DISPENSER*** (with a serrated edge on both sides to cut your ...
07/15/2026

Introducing our newest product.....

*** A WASHI TAPE HOLDER/DISPENSER*** (with a serrated edge on both sides to cut your Washi Tape)

- also has a sliding clip to keep washi tape securely in place - this can easily be removed if you fill up the trays & don't need to use the clip
- dimensions: 9 3/8"L x 4.5"W x 1 1/8" H
- fits rolls up to 1.97" in diameter
- will hold 30 - 5/8" wide washi tape, or 18 - 1" wide washi tape, or 4 - 4" wide washi tape.........or a mix up the sizes you have
- multiple colours available

$15.50

Note: washi tape is not included

**Pick up is in Linden Ridge, Wpg, MB

- Made in Canada
- Custom designed & 3D printed by us in our home studio/office in Wpg, MB

Please contact us with any questions.

Introducing the new "Measuring Tape Keeper"$62 5/16" Diameter x 15/16" H -multiple colour choices available-pull the mea...
07/10/2026

Introducing the new "Measuring Tape Keeper"

$6
2 5/16" Diameter x 15/16" H
-multiple colour choices available
-pull the measuring tape out to desired length to use
-twist the "top" of the Keeper to coil the measuring tape back into the Keeper

Check out the pictures below to see step by step assembly

Note: these Measuring Tape Keepers come empty (measuring tape is not included)

**Pick up is in Linden Ridge, Wpg, MB

- Made in Canada
- Custom designed & 3D printed by us in our home studio/office in Wpg, MB

Please contact us with any questions.

Exciting New Product - **INK REFILL STAND**- holds 24 ink refill bottles- fits Stamping Up ink refill bottles - also fit...
07/06/2026

Exciting New Product - **INK REFILL STAND**

- holds 24 ink refill bottles
- fits Stamping Up ink refill bottles
- also fits other brands of ink refill bottles
- tiered and offset to make it easy to see the names or to remove/ replace bottles
- many colour choices available

- 2.5" High x 5.6" Deep
- Width at the front is 5.7", Width at the back is 8.6"

$25

Note: This stand will come empty - no ink refill bottles will be included

**Pick up is in Linden Ridge, Wpg, MB

- Made in Canada
- Custom designed & 3D printed by us in our home studio/office in Wpg, MB

Please contact us with any questions.

07/04/2026

Printing pieces for the "CAT" tonight.

***Stacking Trays - Half Open, Half with 2 Sections & a Half Lid*** The newest additions to our Stacking Trays Collectio...
06/26/2026

***Stacking Trays - Half Open, Half with 2 Sections & a Half Lid*** The newest additions to our Stacking Trays Collection

1. Use these Half Trays on their own or stack multiple Half Trays together
2. Or put 2 side by side on the Full Stacking Trays
3. The Full Lid will fit your "Stack" of Full and Half Trays
Check out the pictures below to see how these stack together.

Dimensions:
Half Trays - 6 1/4" x 3 1/8" x 1" (160mm x 80mm x 25.4mm)
Half Lid - 6 1/4" x 3 1/8" x 1/4" (160mm x 80mm x 6.35mm)

Prices:
Half Open Tray - $4.75
Half Tray 2 Sections Tray - $5
Half Lid - $2.25

Colours: multiple colours to chose from

You'll find so many uses for these......... mix & stack as many trays as you want, cover with a lid. Everything is safe and secure.

Uses:
- embellishments, ephemera, die cut pieces, sentiment strips, gems
- jewellery......rings, earrings, necklaces, bracelets
- beads of all kinds
- sewing accessories..pins, measuring tape, small scissors, chalk marker
- needle craft accessories, embroidery floss
- office supplies....paper clips, pens, staples, erasers, hi lighters, markers
- the list could go on and on

Note: these will come empty

**Pick up is in Linden Ridge, Wpg, MB
- Made in Canada
- Custom designed & 3D printed by us in our home studio/office in Wpg, MB
Please contact us with any questions. See less

New Addition to our collection of Stacking Trays........**FULL OPEN TRAYS**--same size as the Stacking Divided Trays--fi...
06/23/2026

New Addition to our collection of Stacking Trays........**FULL OPEN TRAYS**

--same size as the Stacking Divided Trays
--fits on the Stacking Divided Trays
--the lid for the Stacking Divided Trays also fits the Stacking Full Open Trays

Dimensions: 6.3" x 6.3" x 1" (160mm x 160mm x 26mm)

Price: $8

Colours: multiple colours to chose from

You'll find so many uses for these......... mix & stack as many trays as you want, cover with a lid. Everything is safe and secure.

Note: these will come empty

**Pick up is in Linden Ridge, Wpg, MB
- Made in Canada
- Custom designed & 3D printed by us in our home studio/office in Wpg, MB
Please contact us with any questions.

***STACKING TRAYS AND LID*** ----NEW PRODUCT----You'll find so many uses for these......... mix & stack as many trays as...
06/12/2026

***STACKING TRAYS AND LID*** ----NEW PRODUCT----

You'll find so many uses for these......... mix & stack as many trays as you want, cover with a lid. Everything is safe and secure.

Dimensions:
Stacking Trays - 6.3" x 6.3" x 1" (160mm x 160mm x 26mm)
Lid - 6.3" x 6.3" x 1/4" (160mm x 160mm x 6.35mm)

Prices:
3 Section Tray - $8.60
9 Section Tray - $9.60
Lid - $4.60

Uses:
- embellishments, ephemera, die cut pieces, sentiment strips, gems
- jewellery......rings, earrings, necklaces, bracelets
- beads of all kinds
- sewing accessories..pins, measuring tape, small scissors, chalk marker
- needle craft accessories, embroidery floss
- office supplies....paper clips, pens, staples, erasers, hi lighters, markers
- the list could go on and on

Colours: - many colours to chose from
- colours shown here are Lilac, Light Pink, White

Note: these will come empty

**Pick up is in Linden Ridge, Wpg, MB

- Made in Canada
- Custom designed & 3D printed by us in our home studio/office in Wpg, MB

Please contact us with any questions.

Address

Winnipeg, MB

Website

Alerts

Be the first to know and let us send you an email when 3D Printing by Gabriel's Heart Creations posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to 3D Printing by Gabriel's Heart Creations:

Shortcuts

Share

Category