Wie sind die Öffnungszeiten?

Montag 08:00 - 12:00 Dienstag 08:00 - 12:00 Mittwoch 08:00 - 12:00 Donnerstag 08:00 - 12:00 Freitag 08:00 - 12:00

Artsupport: Tools for Jewellers, Watchmakers and Designers

Startseite
Schweiz
Rümlang
Artsupport: Tools for Jewellers, Watchmakers and Designers

The expert supplier of tools and equipment for the jewellery, watch and dental industries with own au

16/09/2026

Bring more colour to your jewellery designs with COLORIT®.

Easy to apply and permanently cured under blue light, COLORIT® creates brilliant, colourfast surfaces that can be ground and polished after curing. The colours can also be freely mixed, opening up even more possibilities for individual designs.

Thanks to its strong adhesion and high resistance to impact and wear, COLORIT® is made for jewellery that is designed to last.

Until the end of October, get 10% off the entire COLORIT® range at Artsupport, including colours, accessories, the lamp and our new exclusive COLORIT® Set!

Discover the possibilities of COLORIT®: https://www.artsupport.ch/en/shop?amkat=1436&askat=251&utm_source=fb_en&utm_medium=sm&utm_campaign=humeule&utm_content=ps_sd&utm_term=cv

05/09/2026

🔥 Great feedback from the bench: the École Suisse de Sertissage put two of our most compact tools to work.

KNIPEX Pliers Wrench XS
Slim enough for the tightest spots. The parallel, smooth jaws grip evenly without marking delicate surfaces, so prongs and small components can be gripped, adjusted and pressed under full control, even where a larger plier no longer reaches.

Precision Flush Cutter
Trims prongs cleanly right next to the stone. Its very slim design gives a clear view and good access to confined areas, and the precise cutting edges leave a clean, virtually burr-free cut with noticeably less vibration.

👉 More control
👉 Better access to tight spots
👉 Clean, precise cuts
👉 More confidence working close to the stone

Thanks to the École Suisse de Sertissage for the recommendation. 🔨💎

Pliers Wrench XS - https://www.artsupport.ch/en/shop?aid=26428&utm_source=fb_en&utm_medium=sm&utm_campaign=knpx&utm_content=pr_ht&utm_term=co
Side Cutting Pliers - https://www.artsupport.ch/en/shop?aid=26429&utm_source=fb_en&utm_medium=sm&utm_campaign=knpx&utm_content=pr_ht&utm_term=co

20/08/2026

Order a laser. Get more.

Would you like to add a laser welding system to your workshop? Order a system by 31 October 2026 and benefit from three extras at no extra cost:
• Free delivery
• Professional setup
• Personal instruction

Not sure which model best suits your work?
Book a live test, compare different OROTIG systems on site and test for yourself which system best suits your applications and daily workflows.
This allows you to experience the systems before making your decision and choose the one that best suits your work.

Learn more:
https://orotig.artsupport.ch/en/demo/?utm_source=fb_en&utm_medium=sm&utm_campaign=laseroffer&utm_content=ps_wl&utm_term=cv

15/08/2026

Need perfectly round metal discs without spending your time cutting each one by hand?

The Durston Disc Cutter makes it quick and precise. Simply choose the size you need, position your sheet metal and cut a clean, consistent disc.
With 17 sizes from 3 to 19 mm, it covers a wide range of jewellery-making applications and is one of those workshop tools you will reach for again and again.
Simple, precise and made for everyday use.

Discover the Durston Disc Cutter:
https://www.artsupport.ch/en/shop?aid=25066&utm_source=fb_en&utm_medium=sm&utm_campaign=drstn&utm_content=pr_fo&utm_term=co

06/08/2026

A reliable ring fixture is the foundation for comfortable, controlled and precise work in stone setting and engraving.
Designed by professional stone setter Alexander Sidorov, the “Alexander” Ring Fixture is based on many years of hands-on experience in working with rings and teaching advanced stone setting techniques.
Mounted directly onto the GRS MicroBlock®, it allows the ring to be positioned flexibly, giving you easy access to different areas of the piece throughout the setting or engraving process.
Interchangeable drawbars and expanding mandrels accommodate rings of different widths and help secure each piece firmly and reliably.

Discover the “Alexander” Ring Fixture:
https://www.artsupport.ch/en/shop?aid=24298&utm_source=fb_en&utm_medium=sm&utm_campaign=grs&utm_content=ps_ss&utm_term=co
“Alexander” Stone Setter’s Package (+GRS MicroBlock®)
https://www.artsupport.ch/en/shop?aid=24299&utm_source=fb_en&utm_medium=sm&utm_campaign=grs&utm_content=ps_ss&utm_term=co

31/07/2026

The right texture starts with the right tool.

The Fretz “Raw Silk” Texturing Hammer features randomly ground heads that create an uneven, organic surface inspired by the appearance of raw silk.
A similar texture can be produced with a rolling mill on flat metal. The advantage of the hammer is that it also works on formed and three-dimensional pieces, where rolling is no longer possible.

Discover the Fretz “Raw Silk” Texturing Hammer:
https://www.artsupport.ch/en/shop?aid=24009&utm_source=fb_en&utm_medium=sm&utm_campaign=frtz&utm_content=ps_sd&utm_term=co

27/07/2026

Small beads and delicate designs require a wire that is flexible, reliable and easy to work with.

GRIFFIN Jewelry Wire is made from 19 twisted stainless steel strands with a transparent HiFlex nylon coating. It feels soft and flexible while remaining strong and resistant to wear.
The wire can be knotted and threaded through even very small beads without a needle, giving jewellery makers more freedom when creating detailed pieces.

Discover more: https://www.artsupport.ch/en/shop?aid=1540&utm_source=fb_en&utm_medium=sm&utm_campaign=grfn&utm_content=pr_fi&utm_term=co

17/07/2026

Cast rings directly in your own workshop.

With Lampert FUSION, ring blanks in gold and silver can be produced quickly, easily and consistently. No investing and no complex preparation required.

Melt down old jewellery and turn it directly into new rings. Efficiently and without compromising on quality.

Discover FUSION:
https://www.artsupport.ch/en/shop?aid=26404&utm_source=fb_en&utm_medium=sm&utm_campaign=lmprt&utm_content=pr_ca&utm_term=di

10/07/2026

NEW: Formlabs Flexible 80A Resin V2

Elastic. Durable. Built for repeated use.
Flexible 80A Resin V2 is a resilient elastomeric 3D printing material with the look, feel, and function of 80A cast urethanes, TPUs, and hard rubbers.
Ideal for:
• Functional prototypes and end-use parts
• Soft inserts, jigs, and fixtures
• Custom covers, gaskets, and seals
• Shock-absorbing bumpers and enclosures

The new V2 formulation is made for Form 4 Series printers and delivers major improvements compared to the previous version:
• 2x higher tear strength
• 2x higher elongation at break
• 4x higher rebound
• Improved aesthetics and aging performance

Flexible parts that do more than just flex.

Discover more:
https://www.artsupport.ch/en/shop?aid=26411&utm_source=fb_en&utm_medium=sm&utm_campaign=sla&utm_content=pr_3d&utm_term=di

07/07/2026

🔥 Closeout Deals. While Stock Lasts.
Looking for the best deals on professional jewellery tools and equipment?
Discover our selected items from the Artsupport range at final clearance prices. These are the last pieces available; once they're sold, they won't be restocked.
Whether you're upgrading your workshop or hunting for a bargain, now's the time to see what's still on the shelf.

Shop Closeout → https://www.artsupport.ch/en/shop?showSpez=ausv&utm_source=fb_en&utm_medium=sm&utm_campaign=arts&utm_content=cr_cl&utm_term=cv

Adresse

Glattalstrasse 222
Rümlang
CH-8153

Öffnungszeiten

Montag	08:00 - 12:00
Dienstag	08:00 - 12:00
Mittwoch	08:00 - 12:00
Donnerstag	08:00 - 12:00
Freitag	08:00 - 12:00

Website

https://www.artsupport.ch/en/shop

Benachrichtigungen

Erfahren Sie als Erste/r von Neuigkeiten und Aktionen: Wir schicken Ihnen eine E-Mail, wenn Artsupport: Tools for Jewellers, Watchmakers and Designers etwas veröffentlicht. Ihre E-Mail-Adresse wird für keinen anderen Zweck verwendet, und Sie können sich jederzeit abmelden.