31/03/2025
New design style air compressor airbrush set has been designed for commercial arts, beauty makeup, illustratio, photo retouching, temporary tattoos, cake decorating, crafts, hobbies and so on.
1. Parameters:
- Model: MAC-018
- Type: air compressor airbrush set
- N.W. with battery: 1012g
- N.W. without battery: 900g
- Packaging size: 20.3*18.2*7.2cm
- Charging time: 1.5 hours
- Continuous use time: 1.5-2 hours
- Gear: high, medium, low
- Three lights of gear with green, blue, and orange
- Flow rates of 11, 10, and 9L/min, pressure remains unchanged
-12V 1200mAh
- Pressure value: around 30psi
- Airbrush: airbrush with 0.3mm caliber
- Cup capacity: 7cc & 20cc
- Tracheal length: 1.5m
- Control method: double-action trigger air-paint control
- Automatic off/on the air pump with the switch of airbrush
2. Applications
Make Up, Cake Decorating, Nails Art, Model Painting,Tattoo Painting, Commercial Art etc.
3. How to Spray
a. Connect the airbrush with air supply pressure between 5-30PSI. Drop the material to be sprayed into
the mounted color cup on the top of the airbrush.
b. By drawing back on the trigger, paint will be released.
c. Adjust the paint amount with trigger and the distance airbrush held to surface to get wanted pattern.
d. Remove needle cap for a fine line or small dot, which is achieved by working very close to the surface
while releasing a very small amunt of paint.
e. Please keep the nozzle and nozzle cap clean. Dust will reduce atomization effect.
4. Kindly Note
1) Please debug the airbrush to the best state, and then use clean water to test it, if atomization is mormal, you can use it with lolors or pigment.
2) Please use the airbrush stably, if dropped on the ground, it may affect the use effect, or damaged.
3) After use, please clean the airbrush soon to avoid clogging and affect the next use.
4) In order to protect the airbrush well, a professional person to change needle and nozzle will be recommended.
5) To prolong your airbrush gun's life span, please clean your gun in a proper way.
It will be better to clean with special airbrush cleaning liquid or 75% medical alcohol for cleaning. Alcohol may corrode the seal, so it is better to clean with special airbrush cleaning liquid.
