Shandong Power Industry And Trade Co., Ltd.

Home
China
Qingdao
Shandong Power Industry And Trade Co., Ltd.

Welcome to Andy marine! Builders of quality marine hardware and lasting relationships for more than 25 years.

30/07/2026

🎉This folding telescopic marine ladder is made of 304 or 316 stainless steel as the main material. The surface has been highly polished, which not only makes it visually appealing but also highly resistant to corrosion.

🎉Each step of this ladder is equipped with a PVC anti-slip pad. Even after getting wet, it can still maintain good anti-slip performance, effectively reducing the risk of slipping.Whether used after swimming with wet feet or in rainy weather, the anti-slip pad can provide reliable grip.

🎉The folded ladder can be neatly placed beneath the platform or inside the cabin.When needed, simply pull it out to unfold. The entire process is quick and convenient.

🔗https://www.hardwaremarine.com/

15/07/2026

📌The adjustable design of this fishing rod holder is another key feature. Drag fishing, bottom fishing, and vertical fishing have different requirements for the angle of the fishing rod. This adjustable outrigger fishing rod holder allows for angle adjustment, enabling users to change the inclination of the fishing rod according to their specific needs. When storing the fishing rod, it can also be adjusted to the appropriate position without taking up space. This flexibility enables the same set of equipment to be used in various fishing scenarios.

📌In terms of installation, it can be installed on the deck or side of boats, yachts, or kayaks. After being assembled, the fishing rod holder blends seamlessly with the hull, presenting a simple and understated appearance. It doesn't cause any problems when not in use. It won't trip people or take up extra space on the deck. It is particularly suitable for users who prefer a neat and organized setup.It is compatible with most standard fishing rods and does not require frequent adjustments of the rod holder for changing rods.

🔗https://www.hardwaremarine.com/

03/07/2026

✅The separate installation of the cup holder and the fishing rod holder means there will be twice as many openings.This fishing rod holder with cup reduces the number of components needed from two to just one at this location.

✅Additionally, with this fishing rod holder, you can place your fishing rod on it when not in use. When you need to reel in the line, you can simply place the handheld cup inside the cup holder. This can greatly enhance the fishing experience.

✅This fishing rod holder offers three angles: 15 degrees, 30 degrees and 90 degrees.

✅This fishing rod holder is made of 304 or 316 stainless steel and is specifically designed for use in marine environments.If you use the boat on a regular basis, simply choose the 316 stainless steel material.

🔗https://www.hardwaremarine.com/

26/06/2026

📌The interior of the fishing rod holder is prone to accumulate seawater and rainwater. If the accumulated water stays for a long time, it will accelerate the corrosion of the metal and may even damage the fishing rod.This fishing rod holder has drain, allowing water to flow out naturally without the need for manual cleaning of accumulated water.Every time water from the waves or rain enters, the interior quickly returns to dryness.

📌When the fishing rod holder is not in use, the opening will be exposed. Fish bait residue, sand particles, and small parts may fall into it.This fishing rod holder is equipped with a cap. The cap can seal the opening, preventing any debris from entering.

📌Different fishing positions and fish species require different angles for the fishing rods. This fishing rod holder offers three inclination angles: 15 degrees, 30 degrees and 90 degrees. You can choose the appropriate model according to your own habits and the conditions of the sea area. The dimensions of all models are the same.

📌Whether it's a small boat, a medium-sized fishing boat, or a large yacht, this fishing rod holder can handle all of them.The design with cap and drain also makes it more reliable in adverse weather conditions.

🔗https://www.hardwaremarine.com/

11/06/2026

📌The ordinary hawse pipe is only responsible for changing the direction of the rope. The rope needs to be pulled through the hawse pipe and then fixed to the cleats. During this process, the rope is prone to slipping off, thereby increasing the risk. The integrated design of the hawse pipe and the cleat allows the rope to pass through the hawse pipe and then directly wrap around the same accessory on the side. One hand can hold the rope while the other hand quickly completes the rope tying. Especially when operating with one hand, this design provides great convenience.

📌After the installation is completed, you can conduct a tension test using an old rope. Gradually apply force to the rope and observe whether there is any displacement, rotation or abnormal noise in the entire hardware.

📌During daily use, after each use, please do not leave the rope in the hawse pipe for a long time. The damp ropes will accumulate salt and sediment. These particles will wear down the surface of the stainless steel like sandpaper. At the same time, the continuous tension will cause the rope to press into the metal surface, creating indentations. After releasing the ropes, clean the hawse pipe thoroughly and wash away the salt with fresh water.

🔗https://www.hardwaremarine.com/

03/06/2026

The heavy bow chock is suitable for installation at positions with high stress. This bow chock can usually be applied in front of the mooring posts at the bow, stern or midsection of the boat.When the rope needs to change direction, the bow chock can provide a smooth turning point.
The opening of the bow chock should in the opposite direction of the rope's movement.Otherwise, when the rope slackens, it will slip out through the opening.Especially at the bow position, the released ropes may directly hit the hull or the deck, which is extremely dangerous.
If the bow chock is directly installed, when the rope is under tension, the bow chock will concentrate the force around the installation hole. Over time, this may cause damage to the hull or the deck.When installing the bow chock, adding a stainless steel backing plate can help distribute the tension.

🔗https://www.hardwaremarine.com/

22/05/2026

🎉This cockpit drain has a simple structure and there is no need to worry about rust or leakage at the welds.It adopts a 90-degree elbow structure. This design has two advantages: First, the 90-degree elbow naturally forms a water seal, which can effectively prevent odors and insects. Second, the elbow can be directly connected to the drainage pipe without the need for additional fittings.

🎉Before installing this cockpit drain, there are a few details that deserve attention. First, before installation, please measure the inner diameter of the drainage pipe. This product offers two interface sizes, corresponding to pipes of different thicknesses. Secondly, during installation, an additional layer of sealant can be applied beneath the fl**ge. This step effectively prevents corrosion caused by long-term water accumulation at the opening.

🔗https://www.hardwaremarine.com/

15/05/2026

🎉The boat's sun canopies, bimini tops and flagpole often need to be frequently disassembled and reassembled. The traditional joints require the use of tools to tighten the screws, which makes the operation rather slow.
🎉This joint is equipped with a pull-out mechanism. You can manually pull out the pin to quickly complete the folding. Use your fingers to grip the pull ring and pull it outward. The pin will then pulled out of the lock hole.
🎉When the tube is adjusted to the proper position, you can insert the pin back to secure it. The entire process does not require a wrench or any tools.

🔗https://www.hardwaremarine.com/

09/05/2026

🎉This telescoping marine drop ladder is available in three lengths - 2 steps, 3 steps and 4 steps - and can be used for boarding vessels ranging from small fishing boats to large yachts.
📌The ladder is made of stainless steel and features PVC anti-slip steps, ensuring both durability and safety.Please feel free to contact our team to obtain more detailed information about the marine ladders.

🔗https://www.hardwaremarine.com/

27/04/2026

📌Andy Marine’s recently launched series of 316 stainless steel handrail rectangular base , available in four standard angles—30°, 45°, 60°, and 90°—and covering a range of pipe diameters from 7/8 inch to 1-1/4 inch, offers a comprehensive selection of options for the marine assembly sector.
📌This product series is made entirely of 316 stainless steel, formed using precision casting techniques and finished with a mirror-polished surface, ensuring consistent performance in terms of seawater corrosion resistance and long-term durability.The bases for different angles correspond to specific mounting dimensions; the compact structural design ensures both a snug fit and robust support.
📌From transition bends to straight connectors, Andy Marine’s systematic selection of angles and specifications helps customers minimize on-site modifications during design and construction, thereby improving installation efficiency. Whether for new-build vessels or retrofit projects, this series offers the right component solutions for every need.

🔗https://www.hardwaremarine.com/

Address

Zhonghai Building, No. 76 Yanji Road, Shibei District, Qingdao City
Qingdao
266000

Telephone

+8615865772126

Website

http://www.hardwaremarine.com/

Alerts

Be the first to know and let us send you an email when Shandong Power Industry And Trade Co., Ltd. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Shandong Power Industry And Trade Co., Ltd.:

Want your business to be the top-listed Shop in Qingdao?