Titan Industrial Ceramics

Titan Industrial Ceramics Titan Industrial Ceramic (In short: Titan) is a noted manufacturer, exporter and supplier of industr

10/02/2026

Today is Little New Year in the Chinese lunar calendar —
a moment that marks the countdown to Spring Festival.

It’s a time to say thank you
for the trust, cooperation, and shared journey over the past year.

As the new year approaches,
we wish you smooth operations, strong partnerships,
and a prosperous year ahead.

Warm wishes for a joyful Spring Festival!

TZ40, TZ45 or TZ41?Quick guide to choosing the right grinding media 👇✔️ TZ40 — balanced performance for fine & secondary...
09/02/2026

TZ40, TZ45 or TZ41?
Quick guide to choosing the right grinding media 👇

✔️ TZ40 — balanced performance for fine & secondary grinding
✔️ TZ45— higher toughness for high-impact conditions
✔️TZ41 — economical option for coarse grinding

Different materials, different impact levels, different costs — one goal: stable grinding and longer service life.

Which one are you using in your mill? 👀

05/02/2026

99% Alumina Ceramic Lined Pipe | Designed for High-Wear Conditions

In severe abrasive environments, pipeline durability becomes critical.
99% alumina ceramic lined pipes are engineered for long-term wear resistance in demanding material handling systems.

Compared with conventional ceramic or metal pipes, 99% alumina ceramic liners offer:
🔹 Higher hardness and extended service life
🔹 Lower wear rate, reducing replacement frequency and downtime
🔹 Stable chemical performance for slurry, powder, ash, and abrasive media
🔹 Suitable for straight pipes, bends, and high-impact wear zones

From raw material selection to forming, sintering, and liner installation, every step focuses on one goal:
reliable performance under continuous abrasion.

Wear resistance is not just a specification — it’s proven in operation.






04/02/2026

Inside the workshop, ceramic lined pipelines are moving steadily through production.
From straight pipes to elbows, each section is lined and assembled for high-wear slurry and material handling applications.

Precision installation, secure bonding, and careful inspection are part of our daily routine on the shop floor.
These pipelines are designed to handle abrasion where durability matters most — starting from the factory, not just the job site.

Production continues as scheduled.
Quality is built step by step.

03/02/2026

TZ45 ZTA grinding media in routine production this week.
The workshop stays busy with shaping, firing, and inspection, keeping everything on schedule.

Designed for high-impact and high-wear grinding environments, TZ45 continues to support demanding milling applications through consistent daily manufacturing.

Another regular workday on the shop floor.TA37 alumina grinding balls are in steady production, with the workshop runnin...
02/02/2026

Another regular workday on the shop floor.

TA37 alumina grinding balls are in steady production, with the workshop running smoothly from forming to firing.

Daily output focuses on size consistency and stable quality — small details that matter in long-term milling operations.
Routine work, reliable results.

TA37 Alumina Grinding Balls — Large Sizes, Steady SupplyTA37 alumina grinding balls have been moving steadily out of our...
29/01/2026

TA37 Alumina Grinding Balls — Large Sizes, Steady Supply

TA37 alumina grinding balls have been moving steadily out of our workshop.
This time, a European customer placed an order specifically for large diameters:

• 70 mm
• 80 mm
• 90 mm

Producing large-size alumina balls requires more than just scale —
it depends on material consistency, forming control, and stable sintering.

From raw material selection to final inspection, each TA37 ball is made to meet the demands of high-impact and high-throughput grinding environments.

Reliable quality. Consistent supply.
That’s how long-term cooperation is built.

Stronger adhesion, longer life – thanks to the CN intermediate layer!Our rubber-coated drums feature a CN layer – a spec...
27/01/2026

Stronger adhesion, longer life – thanks to the CN intermediate layer!

Our rubber-coated drums feature a CN layer – a specially engineered intermediate layer between the metal drum and the rubber coating.

This CN layer significantly enhances the adhesion of the rubber to the metal, reducing the risk of peeling or cracking during heavy-duty industrial use.

With this innovative design, our drums offer:

Extended service life

Improved wear resistance

Reduced maintenance and downtime

Perfect for mining, material handling, and processing industries, our rubber-coated drums ensure your operations run smoothly and efficiently.

24/01/2026

Alumina Ceramic Cylinders – 21×21 mm

Designed for wear resistance, thermal stability, and long service life, our alumina ceramic cylinders are widely used in chemical processing, mining, and high-temperature industrial equipment.

✔ High purity Al₂O₃
✔ Excellent abrasion resistance
✔ Stable performance up to 1600 °C

Custom sizes and OEM solutions available.
Let’s talk if you are looking for reliable technical ceramic components.

23/01/2026

Precision matters in wear-critical applications.

Our Alumina Ceramic Or***ce Plates are designed for flow control, wear protection, and insulation in demanding industrial environments.
With high hardness, excellent abrasion resistance, and precise machining, they deliver longer service life than metal alternatives.

✔ Custom hole designs
✔ High-purity alumina (92–99%)
✔ Stable performance in abrasive conditions

📩 Feel free to contact us for drawings or samples.

Address

High-Tech Development Zone, Zibo
Shandong
255000

Opening Hours

Monday 08:00 - 18:00
Tuesday 08:00 - 18:00
Thursday 08:00 - 18:00
Friday 08:00 - 18:00
Saturday 08:00 - 18:00
Sunday 08:00 - 18:00

Telephone

+8615864491390

Website

Alerts

Be the first to know and let us send you an email when Titan Industrial Ceramics posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Titan Industrial Ceramics:

Shortcuts

Share

Category