Chint electric

Chint electric We specialize in selling a wide variety of discounted electrical products, including Chint, Schneide

28/06/2026

LX-101 Color Mark
https://www.bestcontactor.com/product/panasonic-lx-101-color-mark-sensor/
LX-101 NPN Open Collector 2m 5-core cable
LX-101-P PNP Open Collector 2m 5-core cable
LX-101-Z / LX-101-P-Z NPN / PNP M8 connector (cable not included)
2.1 Optical Detection
Light Source: Independent RGB LEDs (Red/Green/Blue) with 12-bit AD high-precision recognition
Standard Sensing Distance: 10±3mm (7~13mm)
Light Spot: 1×5mm slender rectangular spot, ideal for narrow color marks and printed registration marks
Response Speed: Ultra-fast 45μs response for high-speed packaging lines
Power Supply: DC 12~24V ±10%, ripple ≤10% peak-to-peak
Power Consumption: Standard ≤750mW (30mA); ECO power-saving mode ≤600mW (25mA)
Dual Outputs: OUT1 main output, OUT2 inverted output; max 50mA load per channel with automatic short-circuit protection
Residual Voltage ≤1.5V, direct drive compatible with and solenoid valves
Environmental & Protection
Protection Class: IP67, waterproof and dustproof, suitable for washdown
Operating Temperature: -10℃ ~ +55℃ (no condensation or icing)
Housing: PBT engineering plastic, glass lens, silicone buttons
Weight: Cable version approx. 120g; 2pcs M4 mounting screws supplied as standard
Core strengths of LX-101: RGB triple-color light source, 1×5mm slender spot, 45μs fast response, IP67 waterproof rating, dual-mode (high-speed MARK tracking / high-precision COLOR discrimination). It adapts to working conditions including narrow color marks, transparent films, reflective aluminum foils, light marks on light backgrounds and high-speed webs. Below is a breakdown of applicable industries, equipment, working pain points and matching operation modes.

28/06/2026

1SVR550127R4100 OFF-Delay
https://www.bestcontactor.com/product/abb-1svr550127r4100-off-delay-time-relay/
Order No.: 1SVR550127R4100
Model: CT-ARE
Product Series: CT-E Economy Single-Function Time
Delay Type: True OFF-delay (Delay without power supply)
Origin: Bulgaria
Mounting Type: Standard snap-on mounting for 35 mm DIN rail
HS Code: 85364900
Core Positioning: Low-cost industrial control power-off sequence control, delay hold for , motors and valves during shutdown
Order Number 1SVR 550 127 R4100
1. 1SVR: General prefix for electronic time
2. 550: Code for CT-E economy series
3. 127: Body code for CT-ARE OFF-delay type
4. R4100: Specification suffix
4: Timing range 0.3～30 s
1: Dual-voltage coil (24 V AC/DC + 220～240 V AC)
00: 1 changeover contact (1c/o SPDT)
Procurement & Selection Notes
1. Standard Delivery Scope: Main unit + DIN rail clip, no base included; direct snap-on mounting to standard 35 mm DIN rail
2. Advantage: Wide dual-voltage supply, compatible with both 24 V industrial AC/DC and 220 V mains circuits in one unit
3. Restriction: Not suitable for frequent switching cycles (10 times per minute), which accelerates capacitor degradation
4. Alternative Recommendation: Upgrade to CT-ERS multi-function series if multi-stage delay and multiple contacts are required

17/05/2026

B&R 3IF060.6 Interface Processor Module
https://www.bestcontactor.com/product/br-3if060-6-interface-processor-module/
This is a 1-slot interface processor module of &R System 2005 series. It can work as either a CPU or a programmable processor to expand bus communication capacity. Compatible with various fieldbus plug-in modules, it is widely used for distributed control and data acquisition in industrial systems.
3 System identifier: System 2005 series, classic B&R automation system
IF Product type: Interface Processor module
060 Function code: Basic interface processor with 1 interface module slot
6 Version code: 6th generation hardware version with optimized bus communication performance
3IF060.6 3IF050.6 3IF260.60-1 3IF152.60-2 3IF613.9 3IF621.9 3IF622.9
Same Series Upgrade 3IF260.60-1 B&R
Same Brand Alternative X20IF1081 B&R
Competitor Model 6ES7 153-1AA03-0XB0
Competitor Model 1756-ENBT
Competitor Model ABB CI854A ---
1. Conduct regular inspection on module installation status and connection tightness every 6 months.
2. Clean dust on module surface with dry compressed air; avoid chemical cleaning agents.
3. Maintain stable DC 24V power supply and control voltage fluctuation within standard range.
4. Regularly update firmware via official B&R website to optimize operating performance.
5. Module hot-swap is not allowed; only plug/unplug under power-off status to avoid damage.
6. Periodically check connection status of external interface modules to ensure stable communication.

12/05/2026

Beckhoff EK1110-0000 EtherCAT extension module
https://www.bestcontactor.com/product/beckhoff-ek1110-0000/
The EK1110-0000 is a EtherCAT extension . It is used to extend EtherCAT segments in line topology, converting E-bus signals to 100BASE-TX Ethernet. It features plug-and-play, one single RJ45 port, a maximum connection distance of 100 meters, and E-bus powered with no external power supply required.
EK Product series identifier EtherCAT Klemme (EtherCAT Terminal Module)
1110 Product model 11 = EtherCAT extension module; 10 = 1×RJ45 port
-0000 Version / configuration code Standard version without special configuration (e.g. M8 interface or EJ pin header)
Contact IL ECO ETHERCAT/2TX
750-363 1×RJ45, 24 VDC
Domestic Alternative Liwei EC-1110
1. Long-distance I/O Station Connection: Cross-area production line connection, single segment up to 100 m.
2. CX Controller Network Extension: Expand EtherCAT network at the end of CX embedded PC.
3. Multi-segment Line Topology: Segmented I/O connection to simplify wiring and reduce interference.
4. Rapid Deployment: Plug-and-play without configuration, ideal for temporary lines or equipment retrofits.
Complete Model List of Beckhoff EtherCAT Extension Modules
1. General Classification Overview
Beckhoff EtherCAT extension modules are mainly divided into five categories:
Line Extension, Star Topology, EtherCAT P, Fiber Optic Extension, and Special Function Modules, covering full demands from basic segment extension to complex topology construction.

05/05/2026

FX5-80SSC-S Mitsubishi Simple Motion Module
https://www.bestcontactor.com/product/fx5-80ssc-s-mitsubishi-simple-motion-module/
The FX5-80SSC-S is an 8-axis simple motion control module of MELSEC iQ-F series. It adopts the SSCNET III/H high-speed servo network, supporting complex multi-axis linkage, synchronous control and cam functions. Designed for high-performance upgrading of small automated equipment, it is compatible with FX5U series PLCs and widely used in packaging, food, electronic assembly and other industries.
FX5 Mitsubishi MELSEC iQ-F series PLC module, compatible with FX5U series CPU
80 Maximum controlled axes: 8 axes
SSC Simple Motion Controller, distinguished from MCC (Advanced Motion Controller)
S Communication interface type: SSCNET III/H servo network (S = SSCNET); G corresponds to CC-Link IE TSN network
Mitsubishi Electric FX5-80SSC-G
SIMATIC ET 200SP TM PosInput 2
LMC058
NJ501-1300
FP7 Motion Module 8 axes
The FX5-80SSC-S is a core motion control module for Mitsubishi FX5U series PLC. With 8-axis control capability, SSCNET III/H high-speed communication and rich motion control functions, it provides a high-performance and cost-effective motion control solution for small automated equipment. Model selection shall comprehensively consider axis quantity, communication protocol and function complexity to match actual application scenarios.
Mitsubishi MELSEC iQ-F simple motion modules are divided into two categories: SSCNET III/H network version (suffix S) and CC-Link IE TSN network version (suffix G). It provides 4-axis (40) and 8-axis (80) specifications, supporting multi-axis linkage, synchronous control and cam functions. Compatible with FX5U series PLCs, it is widely used for high-performance upgrading of small automated equipment in packaging, food and electronic assembly industries.

26/04/2026

SKS36-HFA0-S01 VDC: SICK Servo Encoder
https://www.bestcontactor.com/product/sks36-hfa0-s01-vdc-sick-hiperface-servo-encoder/
The SKS36-HFA0-S01 is a ® interface rotary motor feedback (servo ) manufactured by AG, Germany. The term "VDC" in the model designation refers to its DC supply voltage specification.
Manufacturer SICK AG Leading German industrial sensor manufacturer
Product Type Absolute single-turn encoder HIPERFACE® interface
Supply Voltage (VDC) 7–12 V DC 8 V DC recommended
Current Consumption 60 mA No-load condition
Interface Type HIPERFACE® Standard servo motor interface
Sine/Cosine Cycles per Revolution 128 High-resolution feedback
Shaft Type Tapered shaft Standard configuration
Ingress Protection IP50 With matching connector and closed cover
Max Speed 4096 rpm Safe operating limit
Output Frequency ≤65 kHz Sine/cosine signals
Fl**ge Type Spring mounting plate, stator coupling Mounting method
Weight ≤0.07 kg Lightweight design
Core Features: Ultra-high resolution (23 bit/rev = 8,388,608 counts), low signal noise (±2″), perfect for ultra-precision motion control.
Model SKS36-HFA0-S01
Equivalent 1FT6 Motor Encoder
Equivalent A860-0309-T302
Equivalent OSA18-100
Equivalent E6CP-AG5C
Verify drive compatibility (protocol, power supply, signal definition) before replacement.
Ensure full mechanical dimension matching to avoid concentricity errors.
Re-validate safety functions when replacing safety-certified encoders.
Reconfigure and calibrate drive parameters after replacement.

25/04/2026

West lake in Hangzhou, China, flowers blooming

25/04/2026

HEIDENHAIN ERN1387 2048 62S14-70
https://www.bestcontactor.com/product/heidenhain-ern1387-2048-62s14-70/
Unique Order ID：749 144 59
ERN Series Incremental hollow-shaft rotary , dedicated for servo / machine tool spindle
1387 Product Series Classic servo encoder, 1 Vpp sine/cosine output, high speed and durability
2048 Resolution Pulses per revolution: 2048 lines/rev
62S14 Structure Code Standard code for electrical specifications, housing structure, wiring definition and mounting dimensions
70 Version / Cable Length Factory cable specification and customized structural version
ID：74914459 Factory Order Number Unique single-item coding for genuine original factory matching
Compatible Systems: , , , Huazhong CNC, GSK, gantry & machining center systems
Main Applications:
1. Speed & position closed-loop feedback for CNC spindle motors and servo motors
2. Spindle positioning for machining centers, lathes, milling machines, grinders and automated equipment
3. High-precision angle acquisition for high-speed servo drives and industrial automation
IV. Common Derivative Models (Comparison)
1. ERN1387 2048 62S12: Standard general version
2. ERN1387 2048 62S14-70: Model in use, customized cable & structure version
3. ERN1387 1024 / 4096: Different resolution options
4. Equivalent Upgrade: EQN1387 (multi-turn absolute type)

Address

Yiwu

Website

Alerts

Be the first to know and let us send you an email when Chint electric posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category