Lencomotion audio

21/10/2019

New ´Pure Wire´ copper audio cable
Three cores of 0.5mm diameter oxygen-free copper (OFC) conductors in a larger diameter Teflon tubing are hand braided to the required length. These un-shielded cables provide extremely low capacitance, and impedance.

15/10/2019

4N Solid Silver in PTFE headshell leads

A new take on our 4N solid silver headshell leads. This version uses 0.5mm 99.99% pure single core silver wire with PFTE insulation.
While researching high purity silver wire for audio interconnects we came across some excellent 4N solid core. This 0.5mm PTFE insulated wire looked ideal for making braided audio interconnects but, unfortunately, was a bit to expensive for the price point we were looking to achieve. However, it is ideal for using in short lengths for projects like the internal wiring in our MC SUT, or for headshell leads.

We were about to test a couple of new tonearms and cartridges and needed some headshell leads. The wire was great to work with, and we made sets of leads for the 2 new cartridges, ready for testing. We listened to the cartridges with both our standard Oxygen-Free Copper leads, and the new Solid Silver PTFE leads. Physically, the Solid Silver leads showed a slight reduction in capacitance and inductance over the standard leads, but the real difference was in the sound. We were testing a moving magnet cartridge (Grace F9) and a moving coil cartridge (Supex SD900 Rosewood). Differences were subtle, but with both cartridges the Solid Silver leads sounded better in our opinion. The difference appeared greater with the Supex, but the improvement was definitely there with the Grace as well.

12/10/2019

The new lencomotion audio website has now gone live. Check out the site and as a celebration of the launch we are offering a 10% discount on most items. Just enter the coupon code MOTION1001

10/10/2019

Over the next couple of days lencomotion audio will be launching our new website/shop. The old site has served us well over the past 3 years, but the cost of running the site has increased significantly, and the speed of the site has always been a problem. The new platform is better suited to our needs and provides a cleaner interface, is faster, and provides more flexibility and better security. [ 79 more words ]

Over the next couple of days lencomotion audio will be launching our new website/shop. The old site has served us well over the past 3 years, but the cost of running the site has increased signific…

19/09/2019

The polymer is soft and highly elastic, with strong adhesive properties to remove dust and microscopic dirt, reducing surface noise and distortion on the playback. In addition, its cleaning system allows to clean the corner-gap between cantilever and stylus. The polymer has been developed to ensure that it leaves no residue on the stylus, due to its dry-cleaning system, liquid-free. [ 151 more words ]

Stylus Tip Dry Cleaning System Winyl One-Touch contains an innovative solid polyurethane (PU) polymer, specially designed to provide exceptional cleaning for record player stylus needles to ensu…

01/07/2019

Our double shielded tonearm cable is constructed using high quality instrument cable, designed for low signal electronics in noisy industrial environments. It uses 2 pairs of 22 AWG OFC (oxygen-free copper) wire. Each twisted-cable pair is shielded with foil, and the cable bundle is then shielded again in braided tinned copper sleeving. This construction provides exceptional noise rejection making this cable ideal for the low signal levels produced by phono cartridges. [ 92 more words ]
https://box03.lencomotionaudio.com/index.php?route=product/product&path=60_61&product_id=83

A 1 meter, double shielded tonearm cable, designed to protect the critical low level signal from your tunrables cartridge. Constructed from 22AWG twisted pairs of oxygen-free copper wire, individua…

01/07/2019

The missing link in our cable collection. This new interconnect is constructed using high quality instrument cable that has been designed for low signal electronics in noisy industrial environments. It uses 2 pairs of 22 AWG OFC (oxygen-free copper) wire. Each twisted-cable pair is shielded with foil, and the cable bundle is then shielded again in braided tinned copper sleeving. [ 122 more words ]

A double shielded interconnect, ideal for noisy environments. Constructed from 22AWG twisted pairs of oxygen-free copper wire, individually shielded, with a thick PVC jacket sleeved in PVC braid fo…

03/05/2019

Spikes and absorbers help to prevent undesirable vibrations from being transferred through furniture, flooring and audio peripherals. These absorbers can be especially important in siuations where audio components are near, or in direct contact, with surfaces supporting speakers which can cause the electronic equipment, and turntables, to vibrate and resonate. Very practical and versatile, these self-adhesive rubber absorbers have an optimized support surface, and are ideal for de-coupling your audio components from surface vibrations. [ 32 more words ]

HICON Shock absorbers, Vulcanized rubber, Set of 4, length: 40 mm, width: 40 mm, height: 9,5 mm

05/04/2019

The missing link in our cable collection, this new interconnect is made from industrial grade ethernet cable. It uses 2 pairs of 22 AWG tinned copper wire, shielded with foil and braided copper sleeving. The cable is also double insulated with an inner PTFE sleeve, and an outer PVC jacket. This cable has been designed specifically for use in noisy environments with high levels of EMI, and RF interference. [ 277 more words ]

The missing link in our cable collection, this new interconnect is made from industrial grade ethernet cable. It uses 2 pairs of 22 AWG tinned copper wire, shielded with foil and braided copper sle…

06/01/2019

We often get asked if we make cables to custom lengths, and we are more than happy to do so. The only proviso is that the requested cable falls within a specification range we think is acceptable. We are talking here about impedance, capacitance and noise rejection. There is no point building a cable which won't live up to a customers expectations. [ 101 more words ]

We often get asked if we make cables to custom lengths, and we are more than happy to do so. The only proviso is that the requested cable falls within a specification range we think is acceptable. …

22/12/2018

We are currently out of stock of this popular suppression filter. Our supplier has had the part on back-order for the past month so we have been unable to replenish our stock. However, we have just been notified that the supplier has received a new shipment, and we should be getting more stock shortly after Christmas. As it´s the holiday season we haven´t got a firm delivery date, but we hope to have the filters available by the end of next week.

We are currently out of stock of this popular suppression filter. Our supplier has had the part on back-order for the past month so we have been unable to replenish our stock. However, we have just…

16/12/2018

After a long wait we have finally received our tonearm DIN connectors. A new batch of El Cid MkII cables are being assembled with the added option of your choice of phono plugs. We are offering termination with either Amphenol, or our RC85S plugs. We hope to have pictures of the updated cables in the shop over the next couple of days.

After a long wait we have finally received our tonearm DIN connectors. A new batch of El Cid MkII cables are being assembled with the added option of your choice of phono plugs. We are offering ter…