Raw Prints DIY

Raw Prints DIY 🧩 STL? We’ll print it. 🎨 Custom colours? We’ve got you. ⚙️ Raw prints = your finish. Message us! 💥

Just finished printing the Travel-size Wizard Tower Dice Tower in that pearly white finish – looks sharp, doesn’t it? 🧙‍...
17/09/2026

Just finished printing the Travel-size Wizard Tower Dice Tower in that pearly white finish – looks sharp, doesn’t it? 🧙‍♂️ I love this one because it adds a bit of magic to your dice rolls but doesn’t hog half the table or your bag. Handy for those gaming nights away or when you want something that’s easy to pop out without faffing about.

I’ve had a blast tweaking the design so it prints clean and sturdy every time. Also, if pearl white’s not your vibe, I can do ocean blue, forest green, sunset orange, royal purple, classic black… or whatever colour you fancy really. And if you’re sitting on an STL you’d like printed, just send it over – happy to help sort that out too.

If you reckon this could add a bit of fun to your next session or in your collection, drop me a message and we'll chat colours or sizing. Always good to share a bit of that 3D printing passion! 🎲✨

Been printing these geometric lithophane night lights quite a bit lately, and I’m still well chuffed with how they come ...
14/09/2026

Been printing these geometric lithophane night lights quite a bit lately, and I’m still well chuffed with how they come out. There’s something really satisfying about seeing a favourite photo gently glow through those crisp geometric patterns — like a little window to a memory, but with a bit of modern edge.

The one in the pic is classic black, which always gives a sleek vibe, but I’ve got ocean blue, forest green, sunset orange, royal purple, and pearl white ready to roll if you fancy something a bit different. And of course, I can print any STL file you send over – got a tricky design or a photo you want to see in 3D? Send it my way.

It’s a quiet piece of light that fits anywhere – on your desk, a shelf, or tucked beside your bed as a calming glow. And for photo fans, it’s a fun way to show off those snaps without needing a full frame or screen.

If you’re curious or want to chat custom colours, just drop me a message. I’m always happy to help make these little bits of light just how you like.

This one came off the printer looking like it’s flown straight out of an icy cave 🐉The articulated body and flexi spine ...
13/09/2026

This one came off the printer looking like it’s flown straight out of an icy cave 🐉

The articulated body and flexi spine make this glow-in-the-dark ice dragon great fun to pose, fiddle with, or keep on the shelf as part of a fantasy collection. Give it a little daylight, dim the room, and the glow starts to show ❄️

The one in the photo is printed in glow-in-the-dark filament, but I can print it in any colour you fancy – icy blue, frosty white, fiery red, or something completely unexpected.

And if this dragon isn’t quite the creature you’ve got in mind, you can send over any STL file and I’ll take a look at printing it for you. Always happy to chat through colours, sizes, and what might work best.

Drop me a message if you’d like one printed up 🐲

I had a lot of fun getting this wee lake monster’s shape just right 🐉The Loch Ness Monster figurine is printed in a slee...
05/09/2026

I had a lot of fun getting this wee lake monster’s shape just right 🐉

The Loch Ness Monster figurine is printed in a sleek solid matte black here, giving it a clean, almost shadowy look on a shelf, desk or display cabinet. A simple piece, but it still brings a bit of Scottish folklore into the room — especially when someone asks, “Is that Nessie?” 😄

This one can be printed in any colour you fancy, so you could go traditional black, deep green, bright blue, or something completely daft. I’m also happy to print any STL file you send over, as long as it’s suitable for the printer.

Drop me a message if you’d like one printed up, or if you fancy chatting about colours and custom pieces. 🏴

I’ve been wanting to print this faceted geodesic planter for a while, and the blue glass effect really brings the geomet...
05/09/2026

I’ve been wanting to print this faceted geodesic planter for a while, and the blue glass effect really brings the geometric shape to life 💙

It’s a lovely little way to add some greenery to a desk, shelf or windowsill, with the matching drainage tray helping catch the drips when your plant needs a drink. The angled surfaces give it a different look from every side, especially when the light catches them 🌱

The one shown here is printed in blue, but I can make it in any colour you fancy, from subtle neutrals to something properly bold. And if you’ve got another STL file you’d like printed, feel free to send it over too – I’m always happy to have a look.

Drop me a message if you’d like one printed up, or if you want to chat through colours and custom jobs 🙂

I’ve got a soft spot for prints that look like they’ve wandered straight out of a fantasy tavern, and this Viking Charac...
05/09/2026

I’ve got a soft spot for prints that look like they’ve wandered straight out of a fantasy tavern, and this Viking Character Skull Planter definitely fits the bill. 🪴💀

It’s a fun way to give a windowsill, shelf or gaming corner a bit more character, with a small plant growing out of that wonderfully grumpy-looking Viking skull. It would also make a cracking home for a cactus, succulent, or even a collection of brushes if you’re more painter than plant keeper.

The colour shown here is just one option — I can print it in any colour you fancy, from bone tones and dark greys to something properly bold. 🎨

And if this design has got you thinking about another project, you can send me any STL file and I’ll happily have a look at printing it for you. I’m always up for seeing what fellow makers and collectors are working on.

Drop me a message if you’d like one printed up, or if you want to chat about colours and custom prints.

Been fiddling with the Phoenix Fantasy Figurine lately, and honestly, there’s something about the way this little bird c...
05/09/2026

Been fiddling with the Phoenix Fantasy Figurine lately, and honestly, there’s something about the way this little bird captures that moment of rising from the ashes that really gets me. Printed here in a lovely forest green, it brings out all those fine details in the feathers without any fuss.

It’s not an articulated model, so it’s more about admiration than play – a proper collector’s piece for those who love a bit of mythology or fantasy on their shelves. I’ve got a few other colours too if you fancy something a bit different: ocean blue, sunset orange, royal purple, classic black or even pearl white.

And if you’ve got a favourite STL you want printed, I’m more than happy to help you bring it to life. It’s always a buzz seeing what people come up with.

If this sounds like your kind of thing, just give me a shout, happy to chat or print one up in a colour you like! 🦅🎨

How much workshop time gets lost rummaging through a drawer for the one tool you need? 🔧This wall pegboard hook and orga...
05/09/2026

How much workshop time gets lost rummaging through a drawer for the one tool you need? 🔧

This wall pegboard hook and organiser set is a simple way to keep your most-used bits visible, tidy and within reach. Hooks for tools, space for smaller bits, and a much less cluttered bench — always a win in my book.

I like prints like this because they’re properly useful: not just something nice to look at, but something that earns its place on the wall. The colour shown in the photo is available, but I can print the set in any colour you fancy, so it can match your workspace or stand out a bit 🎨

And if you’ve got another design in mind, you can send me the STL file and I can print that for you too.

Drop me a message if you’d like one printed up, or if you want to chat about colours and sizing. 🙂

Been fiddling with these mini Infinity Cubes for a bit now and honestly, they’re such a simple joy to have around. Print...
03/09/2026

Been fiddling with these mini Infinity Cubes for a bit now and honestly, they’re such a simple joy to have around. Printed this forest green one recently and it’s just the right size to pop in your pocket for a quick fidget when you’re out and about – no hassle, just endless clicks and folds.

What’s neat is how tactile and smooth the movement is once you get the print settings just right. Plus, you can have them in whatever colour you like – ocean blue, sunset orange, royal purple, classic black, pearl white… you name it. And if you’ve got an STL file you’re keen to try in 3D, send it my way. Always up for a new print challenge.

If you fancy one of these or want to chat about colours, just drop me a message. Happy to get one printed up for you.

We’ve now got **PayPal.Me** set up to make payments a lot easier 🙌💙💚If you order from **Raw Prints DIY**, you can now pa...
31/08/2026

We’ve now got **PayPal.Me** set up to make payments a lot easier 🙌💙💚

If you order from **Raw Prints DIY**, you can now pay through:

**PayPal.Me/rawprintsdiy**

Nice and simple, quicker to send, and a more secure way to pay ✅

As always:

🔹 **We do raw prints only**
🔹 **We can print anything that has an STL file**
🔹 **Colours are fully customisable**

So if you’ve got an STL file sitting there and keep thinking, "Can you print this?” 👀
Send it over, and I’ll have a look.

**PayPal.Me/rawprintsdiy**

Address

Ayr
KA80QR

Telephone

+447935819220

Website

Alerts

Be the first to know and let us send you an email when Raw Prints DIY posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Raw Prints DIY:

Shortcuts

Share

Category