Whatever Woodcraft

Call Directions Website Contact the business

Whatever Woodcraft Whatever Woodcraft is run by myself, Martin Pearson. Most of the items are made to order, most items can be personalised.

Most of what I do is wood related, a little hand turning producing items such as pens & the rest is done mainly with a CNC machine which can produce anything I am clever enough to be able to design, early days but I am learning all the time. I can't personalise small items such as pens & purfume pens/atomisers just now, but hope to add a laser engraver at some point to be able to offer that service. The aim of the Company is to make what ever the customer would like using a variety of different materials. Wood is sourced from suppliers who have a sustainability policy in place. Work is mostly with hardwoods from a local sawmill. Scottish Woods supply wood harvested in Scotland, most of it grown locally. They are also members of Scottish Working Woods. The Company has been started as part of my recovery journey after Medical Discharge from the RN with the aid of Help for Heroes & X-Forces.

So just before traveling to Berlin for IFA I decided it would be a good idea to clean my mouse mat & re-print something ...
16/09/2026

So just before traveling to Berlin for IFA I decided it would be a good idea to clean my mouse mat & re-print something on it so it looked good sitting next to my laptop while I was there, not a big fan of laptop touch pads & still prefer to use a wireless mouse.
It went really well & I thought it looked good. It wasn't until I got home that I realised I now had another problem, at home I put the mouse mat on the arm of my chair which has always been OK, problem I now have is that because the mouse mat is not dirty anymore the mouse keeps slipping off the mouse mat lol

Last week I was at IFA Berlin as an xTool host demonstrating xTool machines, what a great experience that was, working w...
13/09/2026

Last week I was at IFA Berlin as an xTool host demonstrating xTool machines, what a great experience that was, working with the Omni 01 UV printer I lost count of how many fridge magnets I printed for people lol, I was still able to print a few to bring home as examples in my own demo room. Printed both flat & in relief to show the difference between the 2 versions.
I took a few members of my team with me to help out, here are 2 of them checking the printhead is moving properly while printing.
The pictures show the fridge magnets I printed as well, done mostly with ai but one of Carole's photos did manage to sneak in lol.
If you are looking to buy an xTool machine then consider booking a demo with one of the xTool hosts, these can be done either in person or online & will help you select the best machine for your needs.
This is the link to my demo room if anyone is interested, it is free to you so will only cost you some time.

https://support.xtool.com/demo-room/host-instruction?id=117&name=Martin+Pearson

So I needed a new notebook, both front & back covers had fallen off the one I carry around with me & it was almost full ...
26/08/2026

So I needed a new notebook, both front & back covers had fallen off the one I carry around with me & it was almost full anyway.
Having printed my phone cover recently it seemed only right to stick with the same theme so I had matching accessories lol
Thanks once agian to Corole for her brilliant photography & editing.

The Highland cow world tour continues on the xTool Omni 01 today & is apparently now known as the Highland cow world & o...
08/08/2026

The Highland cow world tour continues on the xTool Omni 01 today & is apparently now known as the Highland cow world & off-world tour.
These are 1 x white and 1 x CMYK, took 4 minutes each to print & used 6.5p worth of ink each. I have used the MSRP for the inks rather than the promotional launch pricing.

Slate coasters today on the Omni 01, these took just over 4 mins each to print 1 x white, 1 x CMYK standard quality.My H...
06/08/2026

Slate coasters today on the Omni 01, these took just over 4 mins each to print 1 x white, 1 x CMYK standard quality.
My Highland cow is on a world tour, started at home in Scotland & then can be seen on Sunset Boulevard, the last picture was supposed to be outside xTool headquarters in China but the ai couldn't do that so came up with this instead, not sure where he is going next.

Today was a plywood print, I didn't have any wood panels left so just printed to a piece of 3mm plywood, after printing ...
01/08/2026

Today was a plywood print, I didn't have any wood panels left so just printed to a piece of 3mm plywood, after printing I thought I could just make my own frame for it. Working this way I was able to then print the actual frame. If I were to do this again I would not use the smart mask but print the image larger so it printed some of the plywood edge, not sure how far down it would print but if far enough then you could kind of do a full wrap look, of course you could also just paint the sides lol

OK so today's Omni dual UV print is another phone case, one white & one colour, quite lucky with these phone cases becau...
30/07/2026

OK so today's Omni dual UV print is another phone case, one white & one colour, quite lucky with these phone cases because the seller had a range of colours & the silver ones that I bought were much cheaper than the others, obviously not as popular but as I was going to print on it anyway the colour didn't bother me lol
Using Smart Mask I was also able to print the whole of the front & then go back & just print the clip to keep it shut which meant that it was a full print regardless of the clip position.
Artwork on this was once again courtesy of Carole Pearson Photography.

Don't forget I do demos for xTool machines so if you are thinking of buying an xTool machine or know someone who is then you can book either an in person or online demo.

More with the Omni 01 yesterday, these are stained glass effect generated using the stained glass generator within the s...
27/07/2026

More with the Omni 01 yesterday, these are stained glass effect generated using the stained glass generator within the software, artwork for these came from one of the online sites that I don't generally tend to use apart from the one of 2 of my grandaughters outside a flower shop in Yorkshire a week or so ago.

21/07/2026

First Lenticular print on the xTool Omni 01, need to do a little work on alignment or make a jig but it's not bad for a first experiment.
xTool have said that they were working on auto alignment so that will also help.

Address

Unit 32 Flexspace
Kirkcaldy
KY13NB

Opening Hours

Monday 2pm - 7pm
Wednesday 2pm - 7pm
Friday 2pm - 7pm

Telephone

+441383273273

Website

Alerts

Be the first to know and let us send you an email when Whatever Woodcraft posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Whatever Woodcraft:

Shortcuts

Share

Category