Inui Commercial, industrial & sports LED lighting
Padel court lighting specialists
Supply and installation support (UK) View our full range at www.Inui.co.uk

Inui are high quality LED lighting specialists and stock a variety of products including LED tubes and LED panels.

One thing worth doing before signing off a lighting project?Look at it in real use.Lighting calculations, specifications...
21/08/2026

One thing worth doing before signing off a lighting project?

Look at it in real use.

Lighting calculations, specifications and compliance documents are important — but the finished installation still needs to work for the people using the space.

Before final sign-off, take a proper look at the completed project.

Is the light reaching the areas that need it?
Is the lighting reasonably uniform?
Are there distracting dark areas or excessive glare?
And, most importantly, does the space actually work as intended?

Sometimes the simplest final check is also one of the most useful.

Quick to install does not always mean simple to maintain.A fitting may go up easily—but what happens when a driver, comp...
07/08/2026

Quick to install does not always mean simple to maintain.

A fitting may go up easily—but what happens when a driver, component or complete unit needs attention several years later?

Good lighting decisions consider:

- practical access
- replaceable components
- available spare parts
- clear product information
- minimal disruption during maintenance

Easy to install. But easy to maintain?

A lighting installation may look impressive on completion day—but the real test is what happens afterwards.Can players f...
31/07/2026

A lighting installation may look impressive on completion day—but the real test is what happens afterwards.

Can players follow the ball clearly?

Is glare kept under control?

Is the whole court evenly lit?

Does the space remain comfortable and usable?

Good lighting is designed around real people, real movement and real conditions.
Built for real use. Not just installation day.

Advice before productThe best lighting results usually start with understanding the site — not choosing a fitting.Before...
24/07/2026

Advice before product

The best lighting results usually start with understanding the site — not choosing a fitting.

Before talking about products, it is important to consider:

• how the space will be used
• what the project needs to achieve
• existing columns and infrastructure
• surrounding buildings and boundaries
• performance, energy and compliance requirements

Once those points are clear, the right fitting is much easier to select.

Understand the site. Define the objective. Then choose the product.

Energy savings should not mean poorer lighting.A well-designed LED upgrade should reduce running costs while maintaining...
17/07/2026

Energy savings should not mean poorer lighting.

A well-designed LED upgrade should reduce running costs while maintaining — or improving — the way a space performs.

That means considering more than wattage. Light levels, uniformity, optics, positioning and how the space is actually used all matter.

The aim is simple:

Lower energy use. Good visibility. No loss of usability.

Good documentation reduces risk.In lighting projects, clear product information, test data, installation guidance and af...
10/07/2026

Good documentation reduces risk.

In lighting projects, clear product information, test data, installation guidance and after-sales records all help the job run more smoothly.

They support clients, specifiers, contractors and installers by making sure everyone is working from the same information.

It is not paperwork for paperwork’s sake.

It is part of delivering a lighting scheme that performs properly, can be maintained correctly and stands up over time.

WATTAGE ≠ LIGHTING DESIGNOutput, optics and positioning matter.
03/07/2026

WATTAGE ≠ LIGHTING DESIGN

Output, optics and positioning matter.

Should existing lighting infrastructure be reused or replaced?It depends on the site.Existing columns and brackets can o...
26/06/2026

Should existing lighting infrastructure be reused or replaced?

It depends on the site.

Existing columns and brackets can often help reduce cost and disruption, but only if they are suitable for the new scheme.

Before making that decision, it is important to consider condition, spacing, height, electrical supply, maintenance access and whether the final result will meet the site’s needs.

Sometimes the best solution is to work with what is already there.

Sometimes replacement is the better long-term answer.

The key is making that decision properly at the start.

A small detail that can affect the whole result: the angle of the fitting.On paper, a lighting scheme may look right.The...
19/06/2026

A small detail that can affect the whole result: the angle of the fitting.

On paper, a lighting scheme may look right.

The correct fittings may have been selected.

The light levels may appear suitable.

The energy savings may make sense.

But once the installation is complete, small details can make a big difference.
If fittings are not positioned or angled correctly, the result can change very quickly:

- uneven coverage
- dark patches
- unwanted glare
- light spilling where it is not needed
- poorer visibility than expected

This is why lighting is not just about choosing the right product. It is also about making sure the scheme is installed and commissioned properly.

The final few adjustments may not be the most obvious part of the job, but they can be the difference between a lighting scheme that simply switches on and one that works properly.

hashtag hashtag hashtag hashtag hashtag hashtag hashtag

When comparing lighting quotes, it is easy to focus on the final price.But before deciding which quote offers best value...
05/06/2026

When comparing lighting quotes, it is easy to focus on the final price.

But before deciding which quote offers best value, it is worth checking whether each proposal is answering the same question.

Here are five things to clarify first:

1. WHAT LIGHT LEVELS ARE BEING DESIGNED FOR?
Different sites and activities require different standards.

2. IS UNIFORMITY BEING CONSIDERED?
Good lighting is not just about brightness. Even distribution matters.

3. ARE THE EXISTING COLUMNS, STRUCTURES AND POWER SUPPLIES SUITABLE?
A quote that ignores site limitations may not reflect the real project cost.

4. WHAT ARE THE RUNNING COSTS?
Energy use and maintenance should be part of the decision, not an afterthought.

5. WHAT ASSUMPTIONS HAS THE QUOTE BEEN BASED ON?
Two prices may look similar, but the specifications behind them can be very different.

A well-prepared lighting quotation should help you understand the proposed outcome — not just the cost.

Better information leads to better decisions.

Address

Unit 4, Beaumont Court, Prince William Road
Loughborough
LE115DA

Opening Hours

Monday 7:30am - 4:30pm
Tuesday 7:30am - 4:30pm
Wednesday 7:30am - 4:30pm
Thursday 7:30am - 4:30pm
Friday 7:30am - 4:30pm

Telephone

+441509266355

Alerts

Be the first to know and let us send you an email when Inui posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category