https://www.facebook.com/109765215145346/

Pedal Man, Manchester (2026)

27/09/2022

Beatle Vibe (Yellow Sub) Tremolo Guitar Pedal

A unique, handmade, carefully hand-wired guitar pedal. Constructed in the UK using a traditionally based build.

Tremolo effects pedal producing shimmers to robotic vibes.

Features:-

Robust Hammond 1590B yellow powder coated construction (built in the UK).
Unique enclosure artwork.
Rate and Depth controls.
True bypass circuit.
3mm white LED power on/off indicator.
Single 9 Volt standard guitar pedal negative centre power feed (no battery required). Note: AC/DC power adapter not supplied.
This is basically a unique, carefully hand built, hand-wired guitar pedal, built in the UK.

A UK sale only. I will only ship to a UK address.

27/09/2022

TSX Valve Screecher ~~~ Guitar Overdrive Pedal

Based on the ‘classic’ overdrive pedal, but better! - A uniquely handmade, hand-wird unit made constructed here in the UK and not available on the high street!

Much the same as the mass-produced (BIG boy conglomerate) pedal, but with the addition of a toggle switch, which will give you; stock TS808 clipping, red LEDs for a more aggressive distortion and a centre "diode lift" position which will be louder and cleaner than the other two positions.

Nerdy bit: Circuit constructed with a 558 Dual Op-Amp, 1N4148 Diodes, LEDs and 2N5088 NPN Transistor units, plus lots of other ‘magical’ electronics!

Be unique! Be different!

Features: -

Robust 1590B green powder coated Hammond case.
Unique casing artwork
Complimentary Davies control k***s.
Drive, Tone & Level controls.
Special signal ‘clipping’ toggle switch options.
True bypass circuit.
3mm green LED power on/off indicator.
Single 9 Volt standard guitar pedal negative centre power feed (no battery required). Note: AC/DC power adapter not supplied.

This is basically a handmade, non-mass produced, hand-wired guitar pedal.

27/09/2022

SUPER (Nuke) Over Drive Guitar Pedal

Watch out! We are all doomed!!!!

Here we have a clone of the Boss SD-1 guitar pedal, but better!! As it’s not 'mass produced' and not everyone will therefore have this actual pedal. This is a uniquely handmade, hand-wired unit, constructed here in the UK and not available on the high street!

Much the same as the mass-produced (BIG boy conglomerate) pedal, but with the addition of a toggle switch, which will give you additional symmetrical or asymmetrical signal clipping to subtly change the tone of the output signal.

Be unique! Be different!

Features: -

Robust 1590B yellow powder coated Hammond case.
Unique different/unique! Casing artwork
Complimentary Davies control k***s.
Level, Tone and Drive controls.
Special signal ‘clipping’ toggle switch options.
True bypass circuit.
5mm white LED power on/off indicator.
Single 9 Volt standard guitar pedal negative centre power feed (no battery required). Note: AC/DC power adapter not supplied.

This is basically a handmade, non-mass produced, hand-wired guitar pedal.

21/09/2022

Sound Wave Treble Boost Guitar Pedal
A unique, handmade, carefully hand-wired guitar pedal. Constructed in the UK using a traditionally based build.
This is a treble boost pedal based upon the Brian May Treble Boost effect, with the additional modification 3-way toggle switch to flip between more bass, treble or mids.
Features:-
Robust Hammond type 1590B construction (built in the UK).
Unique enclosure artwork.
Gain and 3-way mini-toggle Tone control.
True bypass circuit.
3mm blue LED power on/off indicator.
Single 9 Volt standard guitar pedal negative centre power feed (no battery required). Note: AC/DC power adapter not supplied.
This is basically a unique, carefully hand built, hand-wired guitar pedal, built in the UK.

21/09/2022

Beatle Vibe Tremolo Guitar Pedal

A unique, handmade, carefully hand-wired guitar pedal. Constructed in the UK using a traditionally based build.

Tremolo effects pedal producing shimmers to robotic vibes.

Features:-

Robust Hammond orange powder coated 1590B construction (built in the UK).
Unique enclosure artwork.
Rate and Depth controls.
True bypass circuit.
3mm orange LED power on/off indicator.
Single 9 Volt standard guitar pedal negative centre power feed (no battery required). Note: AC/DC power adapter not supplied.

20/09/2022

SOLD

Floyd Magic Machine – Boutique Delay/Fuzz/Vibrato/Unstable Tape Guitar Pedal

One whacky guitar pedal!!
This is a delay/fuzz/vibrato/modulation/unstable tape simulator/weird noise type pedal thing. Based on the, Mid-Fi Electronics Clari(not) guitar pedal (if you have ever come across this). This pedal however has an additional modification so that you can switch off the fuzz, leaving you with a clean weird noise type thing.
The echo is a one bounce echo and the depth control in combination with the other controls can simulate a sort of broken analogue tape machine, or not, depending upon the settings and what you would like.
For those of you with a technical disposition: The internal circuit is quite involved and makes use of a bright LED (light emitting diode) in combination with a light dependant resistor to provide the unstable tape simulation noise.
So, if you are into something very different, stand out from the crowd! his is the guitar pedal for you!
Features:-
Robust Hammond type 1590BB construction (built in the UK).
Unique enclosure artwork.
5 Davies 1900H control k***s in a complimentary white
Volume, Depth, Delay, Tracking and Blend Comtrols.
Fuzz on / off toggle switch.
True bypass circuit.
5mm orange LED power on/off indicator.
Single 9 Volt standard guitar pedal negative centre power feed (no battery required). Note: AC/DC power adapter not supplied.
This is basically a unique, carefully hand built, hand-wired guitar pedal, built in the UK.

18/09/2022

SOLD (within 1/2 hour of posting).

'Boutique' Little Angel Chorus Guitar Pedal.
None of your mass-produced rubbish here! But a unique, traditionally handmade, carefully hand-wired guitar pedal. Constructed here in the UK.

A magical shimmer of different tonal delight using not only the

Depth and Speed controls, but additional Chorus/Vibe - Space/Warbler switches.

Features:-
Robust Hammond 1950BB yellow powder coated enclosure. No brittle plastic!
Unique Angel casing artwork.
Complementary black control k***s and white mini switch covers.
Comprehensive internal circuit using a combination of transistors and Integrated Circuits: PT2399 & NE5532.
Depth, Speed, Chorus/Vibe & Space/Warbler controls.
True bypass circuit.
3mm Angel white LED power on/off indicator.
Single 9 Volt standard guitar pedal negative centre power feed (no battery required). Note: AC/DC power adapter not supplied.

15/09/2022

Tone Bender (fuzz).
Circuit based upon 1960’s fuzz. The original was made by London's Sola Sound company in 1965, Tone Benders were one of the first fuzz pedals to appear during the mid-'60s electric guitar boom.

12/09/2022

Full Drv 2 ~~Overdrive~~ (Fulltone Full Drive 2 Clone)
A completely unique overdrive guitar pedal, based upon the Fulltone Full Drive 2 Clone. Not a mass produced unit - A carefully hand-wired, hand-made guitar pedal, constructed here in the UK.
…and! You will not be disappointed with this pedal / clone.
Unlike the Timmy, this unit has the addition of a toggle switch to switch signal clipping options.
Features:-
Robust metal 1590BB powder coated case construction, no plastic.
Unique casing artwork.
Complementary blue 1900H Davies control k***s.
Two channel overdrive circuit (like the Fulltone Full Drive 2).
Volume, Tone, Overdrive & Boost controls.
Toggle switch for Comp/Cut - FM & Vintage
Toggle switch for Mofset or Standard.
On/Off and Boost stomp switched.
True bypass circuit.
3mm bright blue on/off indicator.
3mm bright yellow Boost indicator.
Single 9 Volt standard guitar pedal negative centre power feed (no battery required). Note: AC/DC power adapter not supplied.

Controls a little more explanation: -

Tone k**b: Tone affecting both channels.
Overdrive k**b: This k**b controls the distortion levels for the Overdrive Mode only (note: the Left-side LED can be lit by itself without theRight-side LED being on).
Boost Mode: Activated by stepping on the BOOST footswitch located at the lower right. (note: both Left-side and right-side LED's must be lit) This transforms the pedal into a medium to higher gained distortion with a nice midrange growl and lots of sustain. You can control the amount of distortion (regardless of where Overdrive k**b is set). Note: Boost Mode will not operate unless the pedal is turned on with the Left LED lit and the Right LED lit.
Comp-Cut Mode: this setting on the mini-toggle switch) accesses the clean boost mode for both channels.
FM Mode: on the mini toggle makes the Overdrive Mode (channel A) very transparent, with less Mids than “Vintage Mode,”
Vintage Mode: this setting on the mini-toggle takes the Overdrive Channel back to the Midrange heavy. More midrange.
MOFSET Mode: This ‘special’ Mode applies some additional signal clipping, which has more bottom-end, more growl, and more aggressive attack &
overtones. In Mofset mode the Comp/Cut, FM, and Vintage Modes are also utilised.

12/09/2022

Tommy ~~Overdrive~~ (Paul Cochrane Timmy Clone)
A completely unique overdrive guitar pedal, based upon the Paul Cochrane ‘Timmy’ guitar pedal circuit, here we have the ‘Tommy’! A zero mass production unit - A carefully hand-wired, hand-made guitar pedal, constructed here in the UK.
The original Timmy quote: "A pedal of near mythic proportions, the Timmy pedal works in conjunction with your amplifier's natural tone to add anything from a mild boost to a strong overdrive without changing the overall character or architecture of your favourite amp's inherent tone."
…and! You will not be disappointed with this pedal / clone.
Unlike the Timmy, this unit has the addition of a toggle switch to switch signal clipping options.
Features:-
Robust metal 1590B powder coated case construction, no plastic.
Unique casing artwork.
Complementary black and white striped control k***s.
Bass, Gain, Volume & Treble controls – Note: as in the Timmy, the Bass and Treble controls act in tandem. The Treble and Bass pots are supposed to cut and so there should be more treble and bass content in the far counter clockwise position. The idea is that as you increase gain the treble and bass pots are rotated to the same position as the gain pot to keep a flat response.
True bypass circuit.
3mm bright blue LED on/off indicator.
Single 9 Volt standard guitar pedal negative centre power feed (no battery required). Note: AC/DC power adapter not supplied.

Pedal Man

27/09/2022

27/09/2022

27/09/2022

21/09/2022

21/09/2022

20/09/2022

18/09/2022

15/09/2022

12/09/2022

12/09/2022

Address

Website

Alerts

Shortcuts

Featured

Share

Category

Listing takedown request