FlorCon

26/02/2016

26/02/2016

26/02/2016

26/02/2016

Launch of Omen 25

Omen 25 Top Section has all the features and benefits of Omen 1 but has an inbuilt bottom recess into which the special full length Insert Support plate is fitted. The Insert Support plate is designed to provide accurate level control across the top faces, load transfer and when the joint opens through shrinkage the Insert Support plate will provide full support to the joint sealant when it is installed or if over 10mm wide joint opening a special steel or Nylon Joint insert of the appropriate width is installed and screwed into the pre-drilled and M5 threaded holes in the Insert Support plate.

26/02/2016

Launch of Omen 1+

Omen 1+ Top Section Is Roll Formed From 3.0mm Thick Galvanised Steel (Or Is Available In Stainless Steel).

Omen 1 top section is connected to an appropriate divider plate to provide a joint with many features and client benefits.

26/02/2016

Launch of Omen 1

Omen 1 Top Section Is Roll Formed From 3.0mm Thick Galvanised Steel (Or Is Available In Stainless Steel).

Omen 1 top section is connected to an appropriate divider plate to provide a joint with many features and client benefits.