BikeWrap

BikeWrap Official invisiFRAME and RideWrap fitter in Scotland

I can supply and install invisiFRAME or RideWrap protective kits for your bike

invisiFRAME kits are between £70 and £95 - see here for pricing https://www.invisiframe.co.uk/frames?___store=default

Hardtail kits are between £70-£75 dependent on model

Full Suspension are approximately £80 - £95 dependent on model

E-Bikes can be around £95 dependent on model

Suspension fork kits - £25 - £30

Frame Fitting is £100 - Your bike can be dropped off and will be ready for collect

ion within 24 hours or less

E-Bike frame fitting is £110 - Your bike can be dropped off and will be ready for collection within 24 hours or less

Fork Fitting is £35

(example; Bike dropped off at 5pm Monday, ready for collection at 9am Tuesday next day)

Jonny’s new Santa Cruz Megatower was here for Invisiframe frame protection. Tidy bit of kit in the glossy silver colourw...
08/09/2026

Jonny’s new Santa Cruz Megatower was here for Invisiframe frame protection.

Tidy bit of kit in the glossy silver colourway, fully protected - was able to give it a seamless downtube and meshed up multi sections so it looks and feels as one piece of film either side of the bike.

Gtechniq HALO ceramic coating was applied across entire bike to add insane hydrophobic properties and make it super easy to keep clean no matter what the weather throws at it.

Beaut in this colour 🤯🔥🔥

Peter’s stunning Deviate Highlander II was in for RideWrap frame and Invisiframe fork protection. Dripping in orange Hop...
08/09/2026

Peter’s stunning Deviate Highlander II was in for RideWrap frame and Invisiframe fork protection.

Dripping in orange Hope components offset against that lovely Iona Green paintwork it looks epic on this high pivot masterpiece of a rig.

Full seamless from headtube and full length of downtube so zero gaps between sections.

Gtechniq HALO protection film specific ceramic coating was applied across the entire bike to add insane hydrophobic properties and ensure this bike art stays looking fresh after any conditions and a breeze to keep clean.

Was sad to see this one leave that’s for sure 🤯🔥🔥

Carolyn’s brand new Specialized Epic 8 was in for Invisiframe frame and fork protection install. Stunning colourway, the...
08/09/2026

Carolyn’s brand new Specialized Epic 8 was in for Invisiframe frame and fork protection install.

Stunning colourway, the fork decals especially as they tie the bike together nicely.

Gave it a full seamless downtube so rather than multiple sections with gaps it looks and feels like a single piece of film. Likewise on the rear stays.

Gtechniq HALO ceramic coating was used across the entire bike to add extreme hydrophobic properties ensuring it’s a breeze to keep clean for years to come.

Stunning 😍

Ryan’s partner’s lovely new Commencal Meta SX was in to have Invisiframe frame protection installed. Stunning colourway ...
08/09/2026

Ryan’s partner’s lovely new Commencal Meta SX was in to have Invisiframe frame protection installed.

Stunning colourway in the stormtrooper colours, was able to seamlessly mesh multiple sections of the downtime so looks/feels as one.

Gtechniq HALO ceramic coating was also applied to ensure it beads that weather off and ease of cleaning for years to come.

Beaut 🔥

Doug’s new Amflow PR Carbon Pro was in to have Invisiframe frame and fork protection installed. Lovely bits of kit these...
08/09/2026

Doug’s new Amflow PR Carbon Pro was in to have Invisiframe frame and fork protection installed.

Lovely bits of kit these new Amflow’s, especially in this Basalt Grey matte colourway.

Seamless throughout from headtube to lower seat tube so no gaps between sections of film.

Gtechniq HALO paint protection film specific ceramic coating was applied across entire bike to give extreme hydrophobic properties and ease of cleaning for years to come.

Just a beaut of an ebike this. 😍

Iain’s immaculately kept 2022 Rocky Mountain Element was in to have RideWrap frame and Invisiframe fork protection insta...
08/09/2026

Iain’s immaculately kept 2022 Rocky Mountain Element was in to have RideWrap frame and Invisiframe fork protection installed.

Meticulously maintained by Iain and i-cycles it literally looks like it just left the factory.

Brilliant wee paintjob on this carbon frame too, proper stealth.

Gtechniq HALO film specific ceramic coating was applied throughout, adding extreme hydrophobic properties for ease of cleaning for years to come.

Subtle stunner. 🔥

Insanely busy week this for installs, but if you’re looking to have your bike art protected from the trails, get in touch 😎

Tidy ex-demo Amflow was in for Invisiframe frame and fork protection, along with a decal freshen up from black to gold ...
08/09/2026

Tidy ex-demo Amflow was in for Invisiframe frame and fork protection, along with a decal freshen up from black to gold on frame, forks and shock.

Was able to seamlessly mesh up from headtube, through downtube and around motor and up to lower seat tube area, so looks/feels like a single piece of film covering the front triangle area.

Gtechniq HALO film specific ceramic coating was applied across the bike adding extreme hydrophobic properties for years to come. This will ensure it’s a breeze to keep clean 😎👍

Always nice seeing a used bike pop back to life with a fresh install of PPF and the decals really finish this bike off nicely. Beaut 🤩

Crawford’s Specialized Epic was in for Invisiframe frame install. Lovely looking bit of kit this, just clean white lines...
08/09/2026

Crawford’s Specialized Epic was in for Invisiframe frame install.

Lovely looking bit of kit this, just clean white lines offset with black components. Super classy look to it.

Was able to give it a full seamless downtube so looks/feels like a single piece of film.

Finished off with Gtechniq HALO ceramic coating adding extreme hydrophobic qualities and ensuring it’s a doddle to clean for years to come.

Stunning. 🤩

Lovely youth size Propain Yuma was over to have RideWrap frame and fork kits installed, and given a seamless install on ...
08/09/2026

Lovely youth size Propain Yuma was over to have RideWrap frame and fork kits installed, and given a seamless install on sections like downtube.

Super cool wee bike for an up and coming shredder, it’s now completely protected ready for him to tackle everything the Tweed Valley can throw at him.

Gtechniq HALO ceramic coating was applied across entire bike adding extreme hydrophobic qualities to ensure it’s a breeze to keep clean in any weather for years to come.

Absolute beaut 🔥

Address

Newtongrange
EH224RY

Telephone

+447935267858

Website

Alerts

Be the first to know and let us send you an email when BikeWrap posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category