https://www.facebook.com/101913389495242/

FoxPitstop, Sheffield (2026)

29/11/2024

Foxpitstop will be at the VMR Jingle bell cup at Bury this weekend if anyone needs any parts.
We have all our front hex conversions in stock, covering XX, ###, XX4 and ###4.
We also have rear hex conversions, diff tubes and rear axles spacers in stock.
Come and say hi :)

18/11/2024

It's been a bit quiet here at Foxpitstop lately, but we are back!

Front 12mm conversion kits for the XX, XX4 and ### are all back in stock, if you'd like any of our parts just pm me here.

XX is £20
### is £20
XX4 is £10

All plus postage, we are based in the UK but ship worldwide

18/11/2024

Losi XX front modern wheel conversion kits now in stock again!

Losi XX front 12mm hex conversion kit £20 plus £2 postage in the UK, international postage please contact me.

To purchase a kit, pay via PayPal, my address is [email protected] supply your address with payment or PM me.

This is the FoxPitstop 12mm conversion for the front of the Losi XX, it is designed to replace the original axles and has everything in the kit you will need to use modern wheels.
Kit includes, Alloy hex axle, stainless screw, stainless serrated nut.
It is designed for the shallow hex type wheels (Schumacher, Jconcepts) this will not work with deep hex front wheels.

The kit makes the car just under 250mm wide so is BRCA, revival etc legal.

You have to modify the front spindles very slightly for clearance, see instructions.

29/02/2024

FoxPitstop replacement part A-9941 for XX and ### series Buggies and Trucks.
These come as a set with 2 crush washers and 2 outer axle spacers.
£14 a set, postage in the UK is £2

*These will not work on the BK2, MF2 and ###S

20/02/2024

New from FoxPitstop Team Losi Alloy Diff Tube A-3072 replacement part.
This is used in all the metal diff halves in the XX and ### series cars excluding BK2 MF2 and ###CR.

These parts were getting hard to find so I thought we better have more available.

£5 plus £2 postage each (diff half not included)

19/02/2024

FoxPitstop Team Losi XX4 front 12mm hex conversion kit.

This kit fits XX4, ###4 and Xfactory X5 with CVD or LCD front driveshafts, this will not work with the standard XX4 kit driveshafts.

These are designed to be used with shallow hex wheels like the Schumacher ones, other brands may fit.
I have designed these to be revival legal and keep a very similar track width as the original car.

They are £10 a pair with £2 postage in the uk.

19/02/2024

FoxPitstop Team Losi ### front 12mm hex conversions are available again!
These are the updated version 2 which don't need any hub modification.

In the kit you'll get 2 12mm hex conversion axles, 2 Stainless M3 screws and 2 Stainless M3 serrated nuts.

Just remove the original axles and swap for the FoxPitstop ones to use modern wheels on the front of your ###.

Kits are £20 plus £2 postage in the UK, additional postage may be necessary for the rest of the world.
If you'd like some just message me here.

03/10/2023

***NEW PRODUCT***

FoxPitstop XX4 TLR 22-4 Steering upgrade bushings. £6 a set, with £1 postage in the UK, I can post worldwide for an extra cost.

These bushings allow you to use the TLR steering bell ranks on the XX4, I have been using the TLR parts for some time and found them much more reliable than the original XX4 steering bell ranks which often skip on the spline in an accident.

To upgrade the steering you will need the following
FPS bushings
TLR 231017
And TLR 234024 (you can also get this part in alloy from Exotek

I ordered my TLR parts from Modelsport in the UK.

This upgrade goes really well with the FoxPitstop carbon steering rack

30/08/2023

Losi XX front modern wheel conversion kits now in stock again!

Losi XX front 12mm hex conversion kit £20 plus £2 postage in the UK, international postage please contact me.

To purchase a kit, pay via PayPal, my address is [email protected] supply your address with payment or PM me.

This is the FoxPitstop 12mm conversion for the front of the Losi XX, it is designed to replace the original axles and has everything in the kit you will need to use modern wheels.
Kit includes, Alloy hex axle, stainless screw, stainless serrated nut.
It is designed for the shallow hex type wheels (Schumacher, Jconcepts) this will not work with deep hex front wheels.

The kit makes the car just under 250mm wide so is BRCA, revival etc legal.

You have to modify the front spindles very slightly for clearance, see instructions.

I can post or deliver to the Oswestry revival.

27/08/2023

TQ, 1st, 2nd, 3rd and 5th at the Scotty Ernst UK showdown in the Vintage class, all using FoxPitstop 12mm front hex conversion kit.

I'll be at Oswestry revival with more stock for of the kits for XX and ###

17/05/2023

I have a small number of Losi XX 12mm front and rear conversion kits to fit modern Schumacher wheels available at the moment.
These are the parts that were on the winning car at the Rhrclassic.

**** Sold out, sorry*****

FoxPitstop

29/11/2024

18/11/2024

18/11/2024

29/02/2024

20/02/2024

19/02/2024

19/02/2024

03/10/2023

30/08/2023

27/08/2023

17/05/2023

Address

Website

Alerts

Contact The Business

Shortcuts

Share

Category