Mick Abbey Tuning

28/04/2026

This is a suzuki TR750 that I've built the pipes for using the headers of the old pipes as they were badly fitted causing them to stick out too far and would catch the floor on the slightest corner.

25/04/2026

I was asked if I could tune this little lambretta for group 5 class in the British scooter racing all the specs in the post

10/03/2026

Here's a pipe that I've built for a racing MZ also the results of the before and after graph of the new pipe against the old pipe in the thin lines

18/01/2026

This is a set of Chinese Rd350 cyls that I've modified, I was very impressed with the quality of the cyls and are good value for the price, the cyls do require the ports to corrected but if they are getting tuned it doesn't matter

17/01/2026

Another Aprilia rs125 ported

17/01/2026

I was asked to build a set of pipes for this Suzuki T20 250 race bike the owner said that the pipes he was using made the bike un rideable and the engine only came to life after 9500 rpm and would rev past 12000rpm but below 9500 rpm the bike was going nowhere, so could I help him so I designed and built him a set of pipes to drop the high rpm ceiling and give the engine more drive from lower down the rev range, his next time out on the bike he won all his race's 👍

10/01/2025

Here's a set of pipes I've built for a yamaha tzr 50 project with an rd125dx engine I've also ported the cyls as well, I'm looking forward to testing it once the owner has finished the build

09/01/2025

04/01/2025

Here's another off road mx pipe that I built last year for an 1981 Moto Gori, the owner wanted a broad spread of power up the top end over the pipe he was using on the bike, here's a few pics of the pipe build and the finished results against the pipe the bike came in with.
Both pipes were tested within half an hour of each other, and the engine is totally std