NEXUS Industrial Supplies Limited

NEXUS Industrial Supplies Limited Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from NEXUS Industrial Supplies Limited, Unit 7, Trench Lock 3, Telford.

Suppliers of Engineering components and consumables including: Bearings, Seals, Belt and Chain Drives, Motors & Gearboxes, Pumps, Pneumatics, Hydraulics, Tools & Maintenance, Industrial Electrical.

🔧 Big things are coming to the NEXUS page... Over the next few weeks, we will be shining a spotlight on our Tools &Maint...
02/06/2026

🔧 Big things are coming to the NEXUS page...

Over the next few weeks, we will be shining a spotlight on our Tools &Maintenance range - and there's a lot to cover!

We supply the industrial maintenance essentials that keep your operations running smoothly, whatever your industry.

👇We want to hear from you - what's the one tool or maintenance product you absolutely couldn't work without? Drop it in the comments below!

👀 Stay tuned - you won't want to miss what's coming.

📞01952 456600
📧[email protected]
🌐www.nexusindustrialsupplies.co.uk

🔧 Some jobs don't have room for the wrong tool.That's why we made sure one of our customers was fully equipped with the ...
28/05/2026

🔧 Some jobs don't have room for the wrong tool.

That's why we made sure one of our customers was fully equipped with the TengTools SCE2 — and honestly, it speaks for itself.

118 pieces. Flight case built like a tank. Fixed castor wheels, retractable handle, combination lock and secure catches. Every socket, spanner, screwdriver, plier, wrench and cutter sitting neatly in pre-cut high-density EVA foam — so when you're on site, everything is exactly where it should be.

No scrambling. No missing pieces. Just a team that's ready.

At NEXUS Industrial Supplies, getting our customers the right kit isn't an afterthought — it's the whole point. 🎯

If you'd like to discuss your tool supply requirements, we'd be happy to help.

📩 [email protected]

TengTools UK & Ireland

Silage is brutal on conveyor belts.Silage handling is one of the most demanding conveyor applications in the agricultura...
27/05/2026

Silage is brutal on conveyor belts.

Silage handling is one of the most demanding conveyor applications in the agricultural sector. Wet, acidic, heavy, and relentless — it chews through poorly specified equipment fast.

For silage applications, specification matters:

🔵 Food grade belt construction — better suited to organic material and the acidic environment silage creates over time

🔗 Stainless steel clips — essential for corrosion resistance in wet agricultural conditions. Standard clips simply don't last

⚙️ Cleated belts — T30 cleats are commonly used on inclined conveyors to improve grip and keep material moving consistently

A Diamondback 2-ply is a well-proven specification for this kind of environment.

Specifying the wrong belt doesn't just affect performance in silage applications — common problems seen across conveyor belt applications include:
▪︎Premature belt failure
▪︎Clip corrosion
▪︎Mistracking
▪︎Unnecessary downtime during your busiest periods

Get the specification right from the start and the whole system becomes more reliable, more efficient and far less reactive.

What conveyor belt issues are you seeing most in agricultural applications at the moment?

We're always happy to talk it through.

📞 01952 456600

🔧 Big news at NEXUS Industrial Supplies — we're now official TengTools distributors! We're incredibly excited to announc...
26/05/2026

🔧 Big news at NEXUS Industrial Supplies — we're now official TengTools distributors!

We're incredibly excited to announce that we've partnered with one of the most respected names in professional hand tools. TengTools has been setting the standard for quality, durability, and innovation since 1985 — and now their full range is available directly through NEXUS.

Whether you're a long-standing NEXUS customer or discovering us for the first time, this is great news for your workshop or facility.

Here's why TengTools stands out:

✅ Swedish-designed, precision-engineered tools built to handle the toughest industrial environments.
✅ A legendary modular "Get Organised™" storage system — no more lost tools, no more wasted time.
✅ Backed by a lifetime warranty — because great tools should last a lifetime.
✅ Trusted by professionals across automotive, manufacturing, engineering, and beyond.

At NEXUS, we've always been committed to supplying products that genuinely perform. TengTools is a natural fit — premium quality, built for people who rely on their tools every single day.

📩 Get in touch with our team today to find out more or to place your first order.

☎️ 01952 452600
📧 [email protected]

TengTools UK & Ireland

🔩 More Timken Bearings Out the Door!Another batch of Timken Tapered Roller Bearings supplied to a customer — and this on...
15/05/2026

🔩 More Timken Bearings Out the Door!

Another batch of Timken Tapered Roller Bearings supplied to a customer — and this one is a great example of what sets an independent supplier apart.

No rigid supply chains. No single-source limitations. Just a team that takes initiative and gets the job done.

At NEXUS Industrial Supplies, our team proactively works across a wide network of suppliers and manufacturers to source exactly what our customers need — whether that's bearings, seals, belts, hydraulics, tools, or anything in between. If you need it, we'll find it.

That flexibility and drive is what being independent is all about. 💪

📩 Have a requirement you're struggling to source? Talk to our team — we love a challenge.

Quick question for engineers & installers 👇When was the last time you checked if your valves were actually WRAS or Gas a...
28/04/2026

Quick question for engineers & installers 👇

When was the last time you checked if your valves were actually WRAS or Gas approved?

It’s one of those details that’s easy to overlook—but it has a big impact on:
• Safety
• Compliance
• Long-term reliability

These 4” screwed ball valves are fully WRAS & Gas approved—giving you confidence in compliant applications.

👉 Is this something you actively check, or only when there’s an issue?

We’ve had some great feedback since introducing Rock Fall Safety Footwear to our range at NEXUS Industrial Supplies 👇Aft...
27/04/2026

We’ve had some great feedback since introducing Rock Fall Safety Footwear to our range at NEXUS Industrial Supplies 👇

After bringing in the Arno Chelsea and Mason Mid Cut, we’ve now sold multiple pairs — and the response from customers has been consistently positive.

Here’s what we’re hearing:

💬 “The most comfortable safety boots I’ve worn.”
💬 “No break-in needed — comfortable straight out the box.”
💬 “Lightweight but still feel really protective.”

It’s always good to see products not just selling, but actually delivering on site.

We’ve also now introduced the Barlow Boot to the range, giving even more options for customers looking for reliable, comfortable safety footwear.

If you’re responsible for PPE or workwear for your team, and comfort and quality is a priority, it’s definitely worth taking a look at the Rock Fall range from NEXUS.

Rock Fall Safety Boots

🚜 Turning a Challenge into a Solution 🔧A customer recently approached us with a unique requirement: they needed stepped ...
17/04/2026

🚜 Turning a Challenge into a Solution 🔧

A customer recently approached us with a unique requirement: they needed stepped washers for their agricultural machinery — and they weren’t available off the shelf.

So what did we do? We got to work. 💪

Partnering with one of our trusted machine shops, we engineered and manufactured the exact parts they needed, ensuring durability, precision, and a perfect fit for their machines.

This is what we love doing — taking a challenge, collaborating with the right partners, and delivering a solution that keeps our customers moving. 🤝

If you’ve got a challenge or need a custom component, we’re always happy to help.

Here’s another great example of a customer returning to us for their hydraulic hose assemblies.This particular customer ...
15/04/2026

Here’s another great example of a customer returning to us for their hydraulic hose assemblies.

This particular customer only requires 1SC hose for their OEM equipment, with assemblies supplied to the exact lengths needed for their system.

For this order, we supplied:
• x1 – 4 metre hose assembly
• x1 – 6 metre hose assembly
• x5 – 15 metre hose assemblies

If you need hydraulic hose assemblies tailored to your requirements — whether for OEM builds, replacements, or spares — we’re here to help.

📍Unit 7, Trench Lock 3, Telford, TF1 5ST
📞 01952 456600

Distag QCS

⚙️ Another machining job completed last week!Two square shafts for an agricultural machine — replicated from customer-su...
13/04/2026

⚙️ Another machining job completed last week!

Two square shafts for an agricultural machine — replicated from customer-supplied samples and turned around quickly to keep things moving.

At NEXUS, we’re more than just components and supplies. We offer a wide range of additional services, and machining is proving to be a popular and valuable option for our customers.

Whether it’s a one-off replacement part or a small batch run, we’re here to help keep your equipment running and your projects moving.

✔️ Made to match original parts
✔️ Fast turnaround
✔️ Reliable quality
✔️ Flexible solutions

Need something made, matched, or machined? Get in touch — we’re happy to help.

📞 01952 456600
📧 [email protected]

Address

Unit 7, Trench Lock 3
Telford
TF15ST

Opening Hours

Monday 8am - 5:30pm
Tuesday 8am - 5:30pm
Wednesday 8am - 5:30pm
Thursday 8am - 5:30pm
Friday 8am - 5:30pm
Saturday 9am - 12:30pm

Telephone

+441952456600

Alerts

Be the first to know and let us send you an email when NEXUS Industrial Supplies Limited posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to NEXUS Industrial Supplies Limited:

Share