TransformEbike.com

TransformEbike.com The tidiest ebike conversions in the UK guaranteed

Anna was referred to me by a previous customer and wanted her son's bike converted. The young man initially wanted a 200...
31/05/2026

Anna was referred to me by a previous customer and wanted her son's bike converted. The young man initially wanted a 2000w rear hub drive as that's what his mates have got (I know I know) but of course that ain't gonna happen. I refuse to fit these god awful extremely heavy and quite frankly dangerous motors. So after a bit of advice back and forth I recommended a 750w Bafang Mid drive. The decision was made and dropped off the bike yesterday and completed today. A brand new Ridgeback Terrain 4 with the 750w mid drive and 48v 13a battery, Thumb throttle that may or may not be installed, Colour LCD, 5 levels of pedal assist, gear shift sensor, all cables internally routed. It ended up a cracking conversion as you can see.

Today's for sale build is a Rockrider ST530 full suspension with a 500w Bafang BBS02B UART coupled to a 36v 14a high cap...
29/05/2026

Today's for sale build is a Rockrider ST530 full suspension with a 500w Bafang BBS02B UART coupled to a 36v 14a high capacity LG cell side loading battery which was the only battery that would fit. Thumb throttle, Colour LCD, 5 levels of pedal assist, gear shift sensor, ebike chain, all cables internally routed and neoprene battery cover as always. Front and rear LEDs and mudguards as you can see.

Let it be known that even though it's a 36v 500w and not a 48v 750w the 500w reaches the same speed as the 750w just less range. The motors internally are exactly the same as each other, just the controller is capped at the 36v.

P.S You only see the finished build but this was an absolute pain in the hoop to get done that you don't see.

Look how tidy this thing is gonna be. The internal cable routing is already there, no drilling needed. had to shave off ...
25/05/2026

Look how tidy this thing is gonna be. The internal cable routing is already there, no drilling needed. had to shave off a bit of the plastic connector to get it through but it couldn't have turned out any better

Since I couldn't be arsed with all the faffin about fitting the ECCRide kit to the polygon Xtrada 5 I gave it the Bafang...
25/05/2026

Since I couldn't be arsed with all the faffin about fitting the ECCRide kit to the polygon Xtrada 5 I gave it the Bafang treatment. 750w BBS02B motor, 48v 13a battery, colour LCD, 5 levels of pedal assist, thumb throttle, gear shift sensor. The standard 44 tooth chainring was rubbing on the frame so had to swap that out for a narrow wide 36 tooth but even with the smaller chainring still gets 40mph without load. All cables internally routed. Yours for a cool £1250 for any follower. £1290 for anyone else

https://www.mbr.co.uk/reviews/hardtail/polygon-xtrada-5-review

Dan and his lovely wife Mymy made good use of the weather at Askham Fell in the lake district testing out their newly co...
24/05/2026

Dan and his lovely wife Mymy made good use of the weather at Askham Fell in the lake district testing out their newly converted Tandem and sent me these amazing pictures. He mentioned hitting 24mph with both of them on an already heavy bike which I think is just astonishing for a 48v 500w

I get these sorts of messages almost daily 🤣🤣
24/05/2026

I get these sorts of messages almost daily 🤣🤣

I can't stop staring at this. Is it normal to get so worked up about a bike?? LOOK AT IT. I need to do this justice with...
23/05/2026

I can't stop staring at this. Is it normal to get so worked up about a bike?? LOOK AT IT. I need to do this justice with the right battery.I already inverted the rear shock to make room for the biggest battery I can find. This thing has everything. Rokshox front and back, dropper seat post, Deore drivetrain. I think this might even top my own Scott Spark.

Change of plans regarding the eccride 1000w. The polygon will take too much fabrication to get it to fit and tbh i can't...
23/05/2026

Change of plans regarding the eccride 1000w. The polygon will take too much fabrication to get it to fit and tbh i can't be arsed with that so it's now going on a full suspension Voodoo Canzo. I just need to find a 48v battery with max amps to fit in the frame. I will find one though

Other tandems I have done in the past I don't think I have posted
22/05/2026

Other tandems I have done in the past I don't think I have posted

Customer Dan and his lovely wife Mymy wanted their Lee cooper Tandem converted with a 500w MXUS (Bafang) rear geared hub...
22/05/2026

Customer Dan and his lovely wife Mymy wanted their Lee cooper Tandem converted with a 500w MXUS (Bafang) rear geared hub motor coupled to a 48v 13a battery. Thumb throttle, LCD, 5 levels of pedal assist. Frame was too thin to internally route the cables but a few colour coded zip ties still makes it tidy enough. All set to head off to the Isle of Man TT event. Not participating obviously, it's fast but not that fast 🤣

Address

Kirk Road
Wishaw
ML27DD

Website

Alerts

Be the first to know and let us send you an email when TransformEbike.com posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category