15/12/2020
Package Included
1kit x Mini Range 4 Inch 185mm Carbon Bezel ( Unassembled )
Mini Range II LR4 4 Inch 185mm Carbon Fiber Frame With 3D TPU Printed Kits Fits 16/20 / 25.5mm Stack Up To 30 Minutes 4S Flight Time Q95A
https://www.ebay.com/itm/124487301380
Item Description
Features:
1. GPS can be set for speed, location, return to home, etc.
2.800 MW VTX can be installed over 3 km
3.4 inch rack flight range: 4S 1100mAh battery 10 minutes, 4S 18650 battery 30 minutes
4. Strut using a folding mechanism, screw lock, the folding structure in flight will not be deformed when a collision occurs, when the hand force after folding to unload, can slow down the hand impact to protect the hand and motor
5. The above theoretical data is for reference only, subject to the actual situation, specific flight times with set configuration and personal operation.
Special questions.
1. Check if the 8 stowage screws are locked before takeoff. Whether the hand is in place.
2. Because collisions can lead to misalignment of hands, careful use of anti-turtle.
Translation from www.DeepL.com/Translator (free version)
Short introduction:
Under the hot selling Range rack, we also listen to the feedback and suggestions of all players, keeping the advantages of the Range rack and the optimized, launched Range Ⅱ, compared to the Range, the Ⅱ range to improve the height and length of the interior space, optimize the installation space, Hold the control holes flight 16 * 16mm, enlarged holes 20 * 20mm, while range II uses a folding mechanism, screw lock, the folding structure will not be deformed In flight, when a crash occurs when the arm is under tension, folding unloading can slow down the impact hands to protect hand and motor
1. Wheelbase: 185mm
2. Weight: about 40.8 g (including prints)
3. Thickness: Bottom plate 1.5mm, top plate 1.5mm, plywood 1.0mm, handle 4.0mm
4. Propeller: 4-inch propeller
5. Hole pitch for flight control: 16 * 16mm, 20 * 20mm
6. Distance between image transmission holes: 20 * 20mm
7. Camera installation width: 14mm, 19mm
8. Motor mounting hole: 9 * 12mm
9. Battery: 3S / 4S 1100mah
10. 3D printing parts: including camera bracket, GPS print seat, anti-slip battery pad (need to provide their own double-sided adhesive fixation)
11. Color of printed parts: black TPU
Recommended configuration.
Motor: 1505 motor 3450 kv
Battery: 3S / 4S 1100mah or 3-4S 18650
Paddle: T4 * 2.5 two sheets / 4024 2 sheets
Image transmission: Mini 800mW
GPS: BN-220 GPS
Suggest to install an independent sound signal such as JHE20B finder
