https://www.facebook.com/112671421799989/

Csetu Truck Models

Kezdolap
Magyarország
Aba
Csetu Truck Models

Kamion makett építéseimet és a hozzá tartozó folyamatokat szeretném bemutatni a Kedves érdeklődőknek.

13/08/2026

Hello, another Thermoking cooling unit is ready. I used a unit made by Heller as a basis, which is the NWD50 type. The last picture shows the difference between the two cooling units, I made quite a few details compared to the Heller. If you are interested and would like to order, send me a message!

13/06/2026

Hello,

I've started a new project. It will be a tanker trailer, at the request of my Dutch friends. Thank you for the many images I received. I'm still in the early stages of the design phase, there are quite a few parts to design, but I'll keep you updated on the progress.

19/05/2026

Good Morning, a fuel tank for the Iveco H-Way 6x2 Midlift suspension has been completed. It is also available for your order from today.

You can order by message, I will send you my latest catalog in a reply message.

15/05/2026

Hello,

I made a few test prints of the "new" 20" abromncs and trilex rims. I really like the front rim, I'm still shaping the rear one because the clips and screws are very deep.

10/05/2026

Hello,

New 20" tires and rims are being made, expanding the 20" range. They will be available soon. The tires have a smaller inner diameter than the Italeri tires. 3D models have been completed, and test prints are currently underway to correct any errors.

07/02/2026

Good morning!

The final version of the Iveco Hi-Way / S-Way Midlift suspension is ready. Available from Mátol. KIT includes the front axle, midlift axle and rear axle wheel hubs, mudguards, a 16mm frame extension and other elements of the midlift suspension. The original Italeri frame needs to be cut at 106mm from the end. Then the small frame extension is glued to the cut out part. The parts fit nicely, easy to build :)

The KIT price is 30€

01/02/2026

Hello, the Iveco Hi-way / S-way Midlift suspension prototype is ready. There are still a few parts that need to be modified, so this is not the final version of the kit. It is based on the original Italeri rear suspension, which the kit needs to be adapted to, so some fine tuning is still needed. Three wheel hubs will be included in the package, the rear one still needs to be designed, and it will also get extra air tanks.

Cím

Aba
8127

Weboldal

facebook.com

Értesítések

Ha szeretnél elsőként tudomást szerezni Csetu Truck Models új bejegyzéseiről és akcióiról, kérjük, engedélyezd, hogy e-mailen keresztül értesítsünk. E-mail címed máshol nem kerül felhasználásra, valamint bármikor leiratkozhatsz levelezési listánkról.