DXF for metal

PROJECTS STORE
Download projects ↓

20/08/2026

Digital Project – Duck

Price 45$ USD

READ the full description before purchasing.

This is a digital product (no physical item) designed for DIY metal sculpture making. You’ll need access to a CNC metal cutting machine or tools for manual cutting using stencils (like an angle grinder). Parts are bent using a bending machine or by hand, then welded together following the step-by-step instructions. Optional finishing includes sanding and painting.

⚠️ Note: You are allowed to produce and sell only finished sculptures. Resale and distribution of drawings, files, assembly kits based on these files is strictly prohibited.

📐 Project Details:

• Material: Steel, 1.5 mm thick

• Bending radius: 2 mm

• Total weight: ~2.3 kg

• Parts: 33 pieces

Files included:

• DXF files (separate and combined on one sheet)

• Drawings: 23 pages PDF

• Assembly Instructions: 12 pages PDF

Final sculpture size (L×W×H): 377 × 207 × 251 mm

File options: With and without engraving

• Cutting layer: «Cut» ✂️

• Engraving layer: «Engrav» 🔧

• Engraving is on the inner side

• The bending in the drawing is indicated from the outside

🛠 Extras & Notes:

• The standard project archive does NOT include any 3D models.
Unassembled 3D STP models can be purchased separately for $0.50 per part. No other 3D models or formats are available.
Please note: I do not guarantee that your specific press brake or software will import these models correctly. Please contact me prior to purchase to clarify details and verify compatibility.

• The project does not include any other files except those listed in the description

• If your machine requires G-code, please contact me before purchasing – I’ll send you a sample file

• If your cutting machine does not read DXF files, do not purchase the project until you find a suitable converter from DXF to the format you need. I will most likely not be able to help you if you require a rarely used format

• If you can’t download the files, I’ll send them via email within 24 hours

• This project is sold exclusively by me — beware of scammers. ⚠️

Thank you, and good luck with your project!

16/08/2026

Digital Project – Minotaur
Price 345$ USD

READ the full description before purchasing.

⚠️ Attention: this project is significantly more complex than usual — 3× the usual number of parts, heightened detail, much greater total weld and cut length. Some parts require bending at acute angles (sharper than 90°). Plan your fabrication accordingly.

Digital product (no physical item) for DIY metal sculpture making. You need a CNC metal cutting machine or manual cutting by stencils (angle grinder). Parts are bent by machine or by hand, then welded following step-by-step instructions. Optional finishing: sanding and painting.

⚠️ You may produce and sell finished sculptures only. Resale and distribution of drawings, files or assembly kits based on them is strictly prohibited.

📐 DETAILS:
- Material: steel 1.5 mm • Bending radius: 1 mm
- Weight: ~110 kg • Parts: 260 pcs
- Size L×W×H: 1991 × 2370 × 2000 mm

FILES INCLUDED:
- DXF (separate + combined on one sheet), with and without engraving
- Drawings: 164 pages PDF • Assembly instructions: 101 pages PDF
- Cutting layer “Cut” ✂️ / Engraving layer “Engrav” 🔧
- Engraving on the inner side; bending indicated from the outside

REQUIRED MATERIAL (1.5 mm):
2000×1000 – 7 sheets; 2400×1200 – 5; 2500×1250 – 4; 3000×1500 – 3.
M6 nuts – 8 pcs; M6×10 hex socket screws – 8 pcs; M6 DIN 125 washers – 4 pcs.

🛠️ EXTRAS & NOTES:
- Archive includes no 3D models. Unassembled STP: $0.50 per part; no other formats. Correct import into your press brake/software is not guaranteed — contact me before purchase.
- No files other than those listed are included.
- Need G-code? Contact me before purchasing — I’ll send a sample.
- If your machine doesn’t read DXF, don’t purchase until you have a converter; with rare formats I most likely can’t help.
- Can’t download? I’ll email the files within 24 h.
- Sold exclusively by me — beware of scammers. ⚠️

Thank you, and good luck with your project!

02/08/2026

Two huge welded stainless steel bulls 1.5 and 2mm metal thickness. Work of the craftsman: duduk.manufactory

sheetmetalfabrication weldinglife

31/07/2026

DIY Sheet Metal Welding Project

10/07/2026

Digital Project – Hyena

This is a digital product (no physical item) designed for DIY metal sculpture making. You’ll need access to a CNC metal cutting machine or tools for manual cutting using stencils (like an angle grinder). Parts are bent using a bending machine or by hand, then welded together following the step-by-step instructions. Optional finishing includes sanding and painting.

⚠️ Note: You are allowed to produce and sell only finished sculptures. Resale and distribution of drawings, files, assembly kits based on these files is strictly prohibited.

📐 Project Details:

• Material: Steel, 1.5 mm thick

• Bending radius: 1 mm

• Total weight: ~41 kg

• Parts: 99 pieces

Files included:

• DXF files (separate and combined on one sheet)

• Drawings: 91 pages PDF

• Assembly Instructions: 53 pages PDF

Final sculpture size (L×W×H): 2024 × 729 × 1000 mm

File options: With and without engraving

• Cutting layer: «Cut» ✂️

• Engraving layer: «Engrav» 🔧

• Engraving is on the inner side

• The bending in the drawing is indicated from the outside

🛠 Extras & Notes:

• 3D models (STP format, unassembled, excluding mirrored parts) available for an additional fee

• The project does not include any other files except those listed in the description

• If your machine requires G-code, please contact me before purchasing – I’ll send you a sample file

• If your cutting machine does not read DXF files, do not purchase the project until you find a suitable converter from DXF to the format you need. I will most likely not be able to help you if you require a rarely used format

• If you can’t download the files, I’ll send them via email within 24 hours

• This project is sold exclusively by me — beware of scammers. ⚠️

Thank you, and good luck with your project!

20/04/2026

Hello everyone. From April 21 to April 25, I will be in China, where, unfortunately, the global Internet will not work and I will not be able to accept applications for projects adjustments, DXF changes, etc., do not lose me, I will respond to everyone after the 25th. I might be able to reply by mail: [email protected]

04/04/2026

Welding Sheet Metal Mini Gorilla. Craftsman:

Adres

Eindhoven

Website

https://ballwool.com/shops/DIYWeldingProjects

Meldingen

Wees de eerste die het weet en laat ons u een e-mail sturen wanneer DXF for metal nieuws en promoties plaatst. Uw e-mailadres wordt niet voor andere doeleinden gebruikt en u kunt zich op elk gewenst moment afmelden.