05/05/2024
Electric high pressure air pump (₱4,000 only)
A1 high-pressure air pump 30mpa electric high-pressure air pump 40mpa single cylinder submersible.
₱4,000 pesos only!!
(SRP 14,918 / shopee price ₱7,066)
Available for cash on delivery around Metro Manila.
LALAMOVE RATE.
Pick-up: Navotas City.
Description
1. High quality motor: made of pure copper, working time can reach 6-8 years
2. High pressure cylinder head: anti-corrosion/rust proof/durable
3. Heat dissipation protection of high pressure cylinder: water cooling is used for heat dissipation to solve the problems of traditional machines such as rapid temperature rise, and the use time is longer
4. Oil water separator: multiple oil water separations, with higher air injection purity
5. Direct sales by manufacturers: all machines/accessories shall be strictly controlled and tested before delivery
Product name: A1 high-pressure air compressor
Power: 1600kw/1800kw/2000kw
Working voltage/current: 220V/8A
Weight: about 20kg including package
Material: stainless steel
size：42*24*38cm
Continuous working time: more than 20 minutes
Cylinder block specification: single cylinder
Drive mode: electric
Inflation volume/inflation speed:
D5 Standard edition: below 0.45L/0.35L-30MPA/4 minutes
D7 Outage Plus: below 0.5L/0.35L-30MPA/4 minutes
D8 Downtime version: below 0.5L/0.35L-30MPA/4 minutes
D9 Downtime version: below 0.5L/0.35L-30MPA/4 minutes
D10 Digital display: below 0.5L/0.35L-30MPA/4 minutes
D10 Breathing filter: below 0.5L/0.35L-30MPA/4 minutes
Filter system:
D5: 93% internal and external filtration
D7: Internal and external filtration 95%
D8/D9/D10: internal and external filtering 99%
Safety design:
D5: External
D5/D7/D8/D9/D10: Integrated
Working time: it can work continuously when the temperature is controlled within 60 degrees
Auto stop function: D5 does not have it, D7/D8/D9/D10 all have it
Product features: all copper motors~D7/D8/D9/D10 are all thickened copper wires with piston rings
Air volume: 80L/min
Notes:
1. Before the first use, you must change the oil plug,add 350ML engine oil
2. Before starting, the pump water must be circulated before starting.
3. Turn on the machine for 10 seconds before pressurization, and then press the container.
4. The temperature of the pump should not exceed 70 degrees when using, and the temperature needs to be turned off to cool down.
5. Pay attention to the pressure gauge when using, do not exceed 30MPa.
6. Do not touch the machine head and metal pipe when using to avoid scalding.
7. If there is something that will not be installed or not understood, please contact customer service.
Main application scope: industrial high-pressure test, oxygen cylinder high-pressure test, high-pressure container inflation, high-pressure leak detection
