What are the opening hours?

Monday 09:30 - 18:00 Tuesday 09:30 - 18:00 Wednesday 09:30 - 18:00 Thursday 09:30 - 18:00 Friday 09:30 - 18:00 Saturday 11:00 - 16:00 Sunday 00:00 - 00:00

http://www.starledtechnology.com/

Starled Technology Pte Ltd, 4008 Ang Mo Kio Avenue 10, Singapore (2026)

30/07/2026

𝐇𝐨𝐰 𝐍𝐞𝐭 𝐂𝐚𝐫𝐛𝐨𝐧 𝐙𝐞𝐫𝐨 𝐈𝐬 𝐂𝐡𝐚𝐧𝐠𝐢𝐧𝐠 𝐓𝐡𝐞 𝐂𝐨𝐧𝐬𝐭𝐫𝐮𝐜𝐭𝐢𝐨𝐧 𝐈𝐧𝐝𝐮𝐬𝐭𝐫𝐲 𝐈𝐧 𝐒𝐢𝐧𝐠𝐚𝐩𝐨𝐫𝐞

A few M&E partners recently started asking us about green energy figures for our Solar LED lights in their BCA submission.

Why now? Here is what many construction companies still miss.

BCA is pushing hard toward 80% green buildings by 2030. LTA now scores contractors on green practices for major tenders. Even tunnelling and underground works are not exempted.

This means lights for your construction site are no longer just about brightness and safety. How much renewable green energy they use now matters in your submission.

We recommend two approaches, depending on your worksite.

For covered or underground areas like basements, tunnels, and sheltered walkways, a solar powered battery paired with normal LED lights works best. At StarLEDTechnology, we work through trusted local partners to source solar powered batteries that can be used to improve your sustainability score.

For open areas like site perimeters and temporary yards, all in one solar LED lights make more sense. Panel and light in a single unit. No cable pulling needed. Install in one afternoon.

In short, Net carbon zero used to sound like a good to have.

But today, it is now showing up in tender documents, site inspections, and even in how your lights are chosen.

If your project needs an experienced lighting partner to help you navigate green lighting requirements for BCA submission, WhatsApp us for a free site inspection.

https://wa.me/6561001917

17/07/2026

𝐇𝐨𝐰 𝐖𝐞 𝐇𝐞𝐥𝐩𝐞𝐝 𝐂𝐁𝐃 𝐋𝐮𝐱𝐮𝐫𝐲 𝐀𝐥𝐭𝐞𝐳 𝐂𝐨𝐧𝐝𝐨 𝐌𝐂𝐒𝐓 𝐑𝐞𝐟𝐫𝐞𝐬𝐡 𝐓𝐡𝐞𝐢𝐫 𝐋𝐨𝐛𝐛𝐲 𝐋𝐢𝐠𝐡𝐭𝐢𝐧𝐠

Altez condo is a high end residential development in the heart of Tanjong Pagar CBD.

We previously worked with their MCST on their tennis and basketball court lights, so when their lobby lights needed replacement, they called us again.

The common area lobby has a high ceiling, the kind that gives the space its grand, five star hotel feel.

However, the original lights there were the old, power draining and heavy.

Any maintenance needed meant sending a technician up on a ladder or lift to handle a heavy fixture at height.

So we recommended a switch to GU10 LED lights instead.

These fittings are 50% lighter, brighter, and far easier to handle during future maintenance sessions, without compromising on the look and feel of the lobby.

The Result?

The lobby is now noticeably brighter, giving the space a fresher and more welcoming feel for residents and guests.

The lighter fixtures also means less strain during future servicing, plus additional cost savings on electricity going forward.

Small upgrades like this quietly protect the value and image of the whole property.

If your building's common areas are still running on old, heavy lighting, WhatsApp us for a site inspection:
https://wa.me/6561001917

30/06/2026

𝐇𝐨𝐰 𝐖𝐨𝐨𝐝𝐥𝐞𝐢𝐠𝐡 𝐌𝐚𝐥𝐥 𝐑𝐞𝐬𝐭𝐨𝐫𝐞𝐝 𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐑𝐞𝐭𝐚𝐢𝐥 𝐀𝐦𝐛𝐢𝐞𝐧𝐜𝐞 𝐎𝐧 𝐂𝐥𝐨𝐮𝐝𝐲 𝐃𝐚𝐲𝐬

Woodleigh Mall had a lighting problem that only showed up on cloudy days.

The car park and common area lights were running on a timer that only switched on at night.

On a clear day, that worked fine. But when the sky turned grey in the middle of the afternoon, those spaces went dark.

The fix sounded simple. Just add a light sensor. If natural light drops below a set threshold, the lights kick in automatically.

But the real problem was placement.

Some sensors needed to trigger even on bright days when shadows darkened part of the common area. Others needed to be mounted in locations only accessible by scissors lift.

Would these sensors actually be triggered reliably after installation?

This is why we always provide comprehensive after-installation testing.

We wait for the light levels to drop enough to trigger the sensor, watch the system respond, and confirm the calibration is right before signing off.

**The Result?**

Woodleigh Mall now has a lighting system that responds in any weather. Rainy days, overcast afternoons, cloudy skies. Not just after dark.

This is what after-installation service means to us at StarLEDTechnology.

Not just supplying the lights or the installation. Staying there until it works.

If your mall, office building, or common area has lights that stay dark on cloudy days, WhatsApp us for a free site inspection.

https://wa.me/6561001917

23/06/2026

Most buildings only think about lights when their A&A planning is done.

But there are 7 things that BCA, SCDF and your maintenance team needs to check for your lighting... and most buildings miss at least 2 of them.

Here's what they miss:

1. BCA limits how many watts your lights can use per square metre.

Most people know A&A needs BCA submission. Fewer know there is a cap on light wattage per zone under SS 530. Offices are capped at 12 W/m². Hotels at 9 W/m². Carparks at 5 W/m².. You cannot just pick any light fitting and assume it passes. It is advisable to find a qualified person to calculate the total wattage of every fitting in every zone before submission.

2. BCA lets you install brighter lights when you add motion sensors

Under SS 530, if you install motion sensors or automatic shut-off controls, you get a Power Adjustment Factor that increases your allowable wattage budget. Better fittings get approved because the controls prove the lights will not run at full power all day.

3. Your existing wiring may not be compatible with new LED drivers.

When you install a new LED fitting on the same circuit without checks, check if the voltage supplied matches the LED driver rating. Poor fit will get flickering from day one. Over time, the repeated power inconsistency wears the driver down and soon lights start to break down.

4. Wrong voltage on the circuit causes drivers to fail slowly.

Even if the wiring looks fine, if the supply voltage does not match the LED driver specification, the driver operates under constant stress. You will not notice it immediately. 6 to 12 months later, drivers start failing one by one across the building and nobody connects it back to the original installation.

5. SCDF requires emergency lights to come on within 15 seconds.

Under SS 563, your emergency lighting must activate within 15 seconds of a power failure and hold for at least one hour. During A&A, if any electrical work touches the main supply, the emergency lighting system must be retested and a record must be kept.

This is a common reason for buildings to fail their Fire Certificate renewal.

6. If your LED driver is sealed inside the ceiling, it will be left there until it fails completely.

We have opened up false ceilings during maintenance jobs and found drivers that have been overheating for months because nobody could reach them easily. During A&A, make sure drivers are installed at an accessible point. It often costs nothing extra to position them correctly during installation. Rectifying it afterwards is a much bigger job.

7. Test and label each light to its switch and breaker for easy maintenance

Map each fitting to its isolator and circuit breaker. Run every motion sensor, timer, and control through a full cycle. If a zone trips and there is no circuit schedule, the facilities team has to test each breaker one by one to find the fault. We have been called to buildings where the original installer never produced this document and the team has been guessing for years.

If your A&A is coming up and you are not sure what to put in your BCA submission, message us for an on-site inspection:

https://wa.me/6561001917?text=Hi,%20I%20saw%20your%20post%20and%20I%20would%20like%20to%20learn%20more

11/06/2026

𝐇𝐨𝐰 𝐋𝐄𝐃 𝐋𝐢𝐠𝐡𝐭𝐢𝐧𝐠 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐬 𝐈𝐦𝐩𝐫𝐨𝐯𝐞𝐝 𝐒𝐚𝐟𝐞𝐭𝐲 𝐚𝐧𝐝 𝐓𝐞𝐧𝐚𝐧𝐭 𝐄𝐱𝐩𝐞𝐫𝐢𝐞𝐧𝐜𝐞 𝐚𝐭 𝐒𝐡𝐢𝐧𝐞@𝐓𝐮𝐚𝐬 (𝐰𝐢𝐭𝐡 𝟑𝟎% 𝐏𝐨𝐰𝐞𝐫 𝐒𝐚𝐯𝐢𝐧𝐠𝐬)

Shine@Tuas is a B2 industrial development sitting right at the gateway of Tuas Mega Port.

We shared previously how we upgraded the staircase lighting there, correcting a wiring issue that had mixed up the emergency and general power supply.

This time, we went back for the next phase.

During their annual A&A exercise, it was identified that the corridors, walkways, and ramps needed a lighting upgrade.

Several key areas needed better light coverage, especially in open spaces where loading and unloading cargo after dark required good visibility to be carried out safely.

As lighting specialists, we were engaged to assess the lighting coverage of the entire facility and install the right type of lights.

The Result?

The corridors, walkways, and ramps are now uniformly lit. Tenants are happy with the increased visibility and safety while working at night.

Power savings are also up by 30% with the switch to LED light fittings from older lights.

The space feels brighter, safer, and more professional. This translates directly into better tenant retention and long-term property value.

For a building with operations running 24/7, lighting coverage directly affects how smoothly business operations can run after dark.

If your building has areas overdue for a lighting refresh, WhatsApp us for a free site inspection:
https://wa.me/6561001917?text=Hi,%20I%20saw%20your%20post%20and%20I%20would%20like%20to%20learn%20more

26/05/2026

𝐇𝐞𝐫𝐞'𝐬 𝐖𝐡𝐲 𝐒𝐨𝐥𝐚𝐫 𝐋𝐢𝐠𝐡𝐭 𝐏𝐫𝐢𝐜𝐞𝐬 𝐀𝐫𝐞 𝐑𝐢𝐬𝐢𝐧𝐠, 𝐀𝐧𝐝 𝐖𝐡𝐲 𝐖𝐚𝐢𝐭𝐢𝐧𝐠 𝐋𝐨𝐧𝐠𝐞𝐫 𝐂𝐨𝐬𝐭𝐬 𝐌𝐨𝐫𝐞

The recent military conflicts have created a lot of uncertainty in global supply chain.

For anyone managing a building, a carpark, or an outdoor space in Singapore, this uncertainty is translating into higher costs of raw materials.

Here's what we're seeing from our overseas partners.

Lithium prices have surged from around RMB 80,000 to over RMB 200,000 per tonne.

That is the material inside almost every solar battery on the market today.

Solar panel production relies on raw materials that have gone up by 5 to 10% across the board.

Suppliers are no longer holding prices for more than a week at a time. What was quoted on Monday may not hold by Friday.

And on the energy side, building operating costs are rising too. Facilities managers are increasingly asking 2 questions:

1. Can we install motion sensors to cut idle hours
2. Can we go solar to remove the electricity cost entirely?

Both are smart questions.

Solar lighting removes the cable entirely. No grid consumption. No wiring disruption to existing infrastructure.

For outdoor pathways, carparks, and common areas, it is one of the most practical ways to reduce recurring utility costs without a major renovation.

The projects we are completing now were priced at rates from two months ago.

The Result?

The clients who moved early are locking in savings at last quarter's cost. Those still in the approval process are watching the numbers climb.

If you are evaluating solar lighting for your property, the window to hold current pricing is shrinking.

WhatsApp us at the link below for a quote:
https://wa.me/6561001917?text=Hi,%20I%20saw%20your%20post%20on%20social%20media%20and%20i'll%20like%20to%20learn%20more

13/05/2026

𝐇𝐨𝐰 𝐰𝐞 𝐮𝐩𝐠𝐫𝐚𝐝𝐞𝐝 𝐬𝐭𝐚𝐢𝐫𝐜𝐚𝐬𝐞 𝐬𝐚𝐟𝐞𝐭𝐲 𝐚𝐭 𝐒𝐡𝐢𝐧𝐞@𝐓𝐮𝐚𝐬 𝐰𝐢𝐭𝐡 𝐞𝐧𝐯𝐢𝐫𝐨𝐧𝐦𝐞𝐧𝐭𝐚𝐥𝐥𝐲 𝐟𝐫𝐢𝐞𝐧𝐝𝐥𝐲 𝐥𝐢𝐠𝐡𝐭𝐢𝐧𝐠 𝐟𝐨𝐫 𝟑𝟎% 𝐜𝐨𝐬𝐭 𝐬𝐚𝐯𝐢𝐧𝐠𝐬.

Shine@Tuas South is a premier B2 industrial development, situated right at the gateway of Tuas Mega Port.

The building sees steady and high movement of people and goods throughout the day, and night. Therefore, safety concerns are paramount.

The building management approached us as they wanted to upgrade their inconsistent staircase lighting, as a proactive measure to enhance safety in the facility.

Here's the problem.

When we checked the system, we found that the previous contractor had mixed up the incoming power supply for emergency lighting and general lighting.

This is a serious issue as in a real power failure, the emergency lights may not function as intended.

On top of that, it took significant effort to trace, separate, and reconnect every cable correctly before we could install new lights.

The results are clear.

The affected staircases are now properly lit, safety is restored, and energy consumption has been reduced through motion sensor control.

This highlights the importance of engaging certified, experienced lighting specialists to set up and maintain your lighting infrastructure.

Most lighting issues only surface when something fails. By then, the cost and risk are already much higher than reasonable.

If you're wondering about what lighting safety issues to look out for in your building, WhatsApp us for a free site inspection:

https://wa.me/6561001917?text=Hi,%20I%20saw%20your%20post%20on%20social%20media%20and%20i'll%20like%20to%20learn%20more

23/04/2026

𝐇𝐨𝐰 𝐘𝐖𝐂𝐀 𝐅𝐨𝐫𝐭 𝐂𝐚𝐧𝐧𝐢𝐧𝐠 𝐑𝐞𝐟𝐫𝐞𝐬𝐡𝐞𝐝 𝐓𝐡𝐞𝐢𝐫 𝐑𝐨𝐨𝐟𝐭𝐨𝐩 𝐋𝐢𝐠𝐡𝐭𝐬 𝐖𝐢𝐭𝐡 𝐄𝐜𝐨-𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲 𝐒𝐨𝐥𝐚𝐫 𝐄𝐧𝐞𝐫𝐠𝐲 𝐚𝐧𝐝 𝐙𝐞𝐫𝐨 𝐂𝐚𝐛𝐥𝐞 𝐏𝐮𝐥𝐥𝐢𝐧𝐠

YWCA Fort Canning is a one-of-a-kind historical, social-enterprise hotel in one of Singapore's most iconic parks.

Built even before World War 2, it provides centrally located accommodation near Orchard Road, with profits supporting local community programmes.

The hotel management contacted us, as the electrical wiring for their walkway bollard lights were aging and needed a refresh.

Pulling new wiring to that section, however, would have been expensive and disruptive, especially in a heritage building.

So instead of recommending a cabled solution, we suggested something simpler.

Solar bollard lights.

No wiring needed. No excavation. No disruption to hotel operations.

The lights activate automatically at dusk and switch to full brightness whenever someone walks past, thanks to a built-in motion sensor.

During the day, the solar panel charges the battery. At night, the bollard lights up on its own, and responds intelligently to movement.

𝐓𝐡𝐞 𝐑𝐞𝐬𝐮𝐥𝐭?

The rooftop walkway is now safely lit every evening with zero cabling works required.

The solar bollards handle the lighting fully on their own, keeping operating costs low and maintenance simple.

Thank you to the YWCA Fort Canning team for trusting us with this project.

If your property has areas that need lighting but cabling is a challenge, WhatsApp us at +65 6100 1917 for a free site inspection.

15/04/2026

𝗛𝗼𝘄 𝗮 𝗠𝗡𝗖 𝗰𝗼𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻 𝗰𝗼𝗺𝗽𝗮𝗻𝘆 𝗯𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝗦𝗶𝗻𝗴𝗮𝗽𝗼𝗿𝗲'𝘀 𝗻𝗲𝘄 𝗧𝘂𝗮𝘀 𝗣𝗦𝗔 𝗽𝗼𝗿𝘁 𝗲𝗻𝗵𝗮𝗻𝗰𝗲𝗱 𝘄𝗼𝗿𝗸𝘀𝗶𝘁𝗲 𝗿𝗼𝗮𝗱 𝘀𝗮𝗳𝗲𝘁𝘆 𝘄𝗶𝘁𝗵 𝗳𝗿𝗲𝗲 𝘀𝗼𝗹𝗮𝗿 𝗲𝗻𝗲𝗿𝗴𝘆 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝗰𝗮𝗯𝗹𝗲 𝗽𝘂𝗹𝗹𝗶𝗻𝗴

A MNC construction company recently approached us for worksite lighting at the Tuas South reclamation area for the new PSA port.

Here's the problem.

The area is huge and the roads leading up to the worksite were shrouded in complete darkness every night, as the area was undeveloped.

This impacted worker safety and even project timeline as drivers had to drive carefully, carry large loads of construction materials and workers across unlit stretches of road.

To make matters worse, the nearest access points to pull any cabling to power street lights were kilometers away.

Pulling cables across such a large distance in an industrial reclamation area does not make commercial sense, when the road is temporary, and there is no residential or commercial development with high footfall.

The installation cost alone would far outweigh the value of the lights.

This is why after careful consideration, we recommended our solar split street lights.

What makes the split design different from a standard solar street light?

The solar panel and the light head are two separate units.

This means the panel can be angled and positioned to face the direction of maximum sunlight, regardless of where the pole needs to stand.

On an open reclamation worksite like Tuas South, that makes a real difference to charging efficiency and overnight performance.

The Result?

Safe road illumination across the worksite, zero cable pulling, zero electricity cost, and 80W of clean solar power per unit.

We are seeing this become a growing trend among construction and industrial worksites across Singapore.

Practical. Eco-friendly. And no expensive installation works needed.

If your worksite or industrial area needs lighting without the cost of full electrical installation, WhatsApp us at +65 6100 1917 for a free consultation.

12/02/2026

𝐇𝐨𝐰 𝐰𝐞 𝐮𝐩𝐠𝐫𝐚𝐝𝐞𝐝 𝐚𝐠𝐢𝐧𝐠 𝐥𝐢𝐠𝐡𝐭𝐢𝐧𝐠 𝐬𝐲𝐬𝐭𝐞𝐦𝐬 𝐭𝐨 𝐟𝐮𝐭𝐮𝐫𝐞-𝐫𝐞𝐚𝐝𝐲 𝐥𝐢𝐠𝐡𝐭𝐢𝐧𝐠 𝐢𝐧𝐟𝐫𝐚𝐬𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐞 𝐟𝐨𝐫 𝐉𝐓𝐂 𝐁𝐮𝐬 𝐒𝐭𝐨𝐩

As LED project lighting specialists, Starled Technology Pte Ltd was recently engaged for a lighting replacement project at JTC Bus Stop, located directly outside The Synergy building within International Business Park (IBP), Jurong East.

JTC Corporation is one of Singapore’s largest government-linked organisations.

Its role is to plan, develop, and manage a large portion of Singapore’s industrial estates, business parks, logistics hubs, and specialised facilities across the island.

Reliability and consistency are core to JTC’s brand and operations, and that extends to how its buildings and infrastructure are maintained and kept operational over time.

The building was completed more than 20 years ago, when the lighting systems and materials used were standard for that era.

Today, infrastructure of this era begins to face very practical maintenance challenges.

In this case, the existing lights were a traditional globe type that has become difficult to source in Singapore.

The fittings were made of PCI material.
Over time, this material cracks.
When cracks form, water enters.
When water enters, lights begin to trip.

These issues do not happen overnight. They surface gradually over the years and create recurring maintenance problems.

Instead of procuring expensive custom lights, we recommended replacing the entire light assembly, starting from the fittings.

The new fittings use standard E27 LED bulbs that are easy to replace with readily available parts and yet they're 30–40% brighter.

This approach preserves the original architectural intent while upgrading the lighting infrastructure in line with modern standards.

Starled Technology Pte Ltd

30/07/2026

17/07/2026

30/06/2026

23/06/2026

11/06/2026

26/05/2026

13/05/2026

23/04/2026

15/04/2026

12/02/2026

Address

Opening Hours

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share

Category

Monday	09:30 - 18:00
Tuesday	09:30 - 18:00
Wednesday	09:30 - 18:00
Thursday	09:30 - 18:00
Friday	09:30 - 18:00
Saturday	11:00 - 16:00
Sunday	00:00 - 00:00