CIG Customization & innovation for collectors by collector, including FX, installations & prop runs.

13/11/2021

"SOLD" 🤩 Here is the video for the KR x OR ROTJ V2 crystal chamber version, with proffie board V2 & neopixel set up, chassis from Goth3D and weathering paint work by CIG.

🛒Also available at Etsy 👇🏻
https://www.etsy.com/sg-en/listing/1096989848/star-wars-kr-crystal-chamber-rotj-luke?ref=shop_home_active_1&frs=1

📍Below are the specs details:
- Weathering & paint work by CIG
- Trooper Trent (weathering stencil)
- Chassis Goth 3Design
- Proffie V2 OS5.9
- 3 X Kyberphonic Luke soundfonts and 3 x music SW sound tracks
- Color changing features for blade and crystal.
- 18650 battery housing
- 28mm Speaker
- TCSS Neopixel PCB
- Free Blade 40" x 144 Neopixel custom-made
- Real apple green quartz with Neopixel.



"SOLD" 🤩Finally completed this installation, the KR x OR ROTJ V2 crystal chamber version using proffie board V2 & neopix...
29/10/2021

"SOLD" 🤩Finally completed this installation, the KR x OR ROTJ V2 crystal chamber version using proffie board V2 & neopixel set up, chassis from Goth3D and weathering paint work by CIG. Video will follow shortly.

🛒Also available at Etsy 👉🏻
https://www.etsy.com/sg-en/listing/1096989848/star-wars-kr-crystal-chamber-rotj-luke?ref=shop_home_active_1&frs=1

📍Below are the specs details:
- Weathering & paint work by CIG
- Trooper Trent (weathering stencil)
- Chassis Goth 3Design
- Proffie V2 OS5.9
- 3 X Kyberphonic Luke soundfonts and 3 x music SW sound tracks
- Color changing features for blade and crystal.
- 18650 battery housing
- 28mm Speaker
- TCSS Neopixel PCB
- Free Blade 40" x 144 Neopixel custom-made
- Real apple green quartz with Neopixel.

20/10/2021

😱😍That switch you could only dream of! It's finally here, after years of R&D! Presenting to you, our first !

🔸Specs below:
- Neopixel combination with crystal clear 5mm LED (3-5 volt)
- Built in Momentary switch
- PLA 3D printed parts
- 5 x 20cm AWG32 wire pre-tinned for easy soldering
- Free 330 ohm or 470 ohm 1/4 watt resistor for data control signal (while stocks last)
- 8mm Hex nut & washer included
- Chrome Bezel housing
- Drill hole 7.2 mm or 5/16"
- Threading M8x0.75

Check out here 👉🏻 https://www.etsy.com/sg-en/shop/CosmicInterGalactic?ref=seller-platform-mcnav

"SOLD" Hi everyone! This is a 89 Saber Mace Windu Lightsaber with 3D printed chassis. (Economic basic setup)Below are th...
03/08/2021

"SOLD" Hi everyone! This is a 89 Saber Mace Windu Lightsaber with 3D printed chassis. (Economic basic setup)

Below are the specs details:
- Proffie V2 OS5.7
- Activation and Auxiliary switch near emi
- 3 X Mace Windu soundfonts and sound tracks
- 18650 Removeable battery housing (Battery not included)
- 22mm Speaker
- TCSS Neopixel PCB
- 7/8" blade holder
- Neopixel blade plug (TCSS PCB)


chassis

  to all the dads, in the galaxy and beyond.
20/06/2021

to all the dads, in the galaxy and beyond.

22/05/2021

(SOLD) 🔈Here’s the video you guys wanted, the 89 Saber ROTJ Darth Vader Lightsaber with Goth 3Design Chassis!

▪️ CIG artwork paint work and copper wire mesh install on chassis
Proffie V2 OS5.7
Soundfonts
▪️ 3 x Darth Vader
Sound tracks
▪️ 2 x Star wars sound tracks
▪️ 1 x Imperial March
Neopixel Blue blade effect
▪️ 3 x Red Blade
1 x strip neopixel (Strobe effect )
KR 28mm Brass speaker
CC saber Neopixel PCB
Removable - Keep power18650 battery

Sold with free DHL shipping and PayPal fee included.

A mother’s love is patient and forgiving when all others are forsaking, it never fails or falters, even though the heart...
09/05/2021

A mother’s love is patient and forgiving when all others are forsaking, it never fails or falters, even though the heart is breaking. Kudos to moms all over the world.🌷

Artist unknown.

"Do. Or Do Not. There Is No Try." May the force be with you, always! Happy May 4th!
04/05/2021

"Do. Or Do Not. There Is No Try." May the force be with you, always! Happy May 4th!

《SOLD》🔈Hello everyone! I have just completed a new saber! It is the 89 Saber ROTJ, Return of the Jedi Darth Vader Lights...
29/04/2021

《SOLD》🔈Hello everyone! I have just completed a new saber! It is the 89 Saber ROTJ, Return of the Jedi Darth Vader Lightsaber with Goth 3Design Chassis!
SOLD with free DHL shipping and PayPal fee included.

▪️ CIG artwork paint work and copper wire mesh install on chassis
Proffie V2 OS5.7
Soundfonts
▪️ 3 x Darth Vader
Sound tracks
▪️ 2 x Star wars sound tracks
▪️ 1 x Imperial March
Neopixel Blue blade effect
▪️ 3 x Red Blade
1 x strip neopixel (Strobe effect )
KR 28mm Brass speaker
CC saber Neopixel PCB
Removable - Keep power18650 battery

15/04/2021

Hi everyone, here’s the video of the Makers Prop Studio's Stainless Steel Graflex Empire Strikes Back Luke Skywalker Lightsaber with Goth 3Design Graflex Master Chassis. Brass & Rust weathering artwork on chassis is done by us CIG.

Selling USD2300 (DHL Shipping & Paypal fees all included)

Specs below:
* KR Saber Elite Graflex 1" Blade Holder
* High Speed polished Nickel Steel Chassis
* Polished Brass Crystal Chamber
* Real Clear Quartz crystal
* Proffie soundboard V2 OS5.7
Soundfonts
* 2 x Luke & Yoda
* 1 x Darth Vader sound tracks
* 2 x Star Wars sound tracks
* 1 x Imperial March Neopixel Blue blade effect
* 1 x Blue Blade
* 1 x Deep Sky Blue Blade
* 1 x Red Blade
* 1 x Neopixel accent (Crystal Chamber) Similar to blade color
* 1 x strip neopixel (Turbine effect)
* KR 28mm Brass speaker
* CC saber Neopixel PCB
* Keep power18650 battery
* Black storage case
* 3.7v Charger 2.1mm

Hi everyone, it’s been a while! I have just finished a Makers Prop Studio's Stainless Steel Graflex Empire Strikes Back ...
13/04/2021

Hi everyone, it’s been a while! I have just finished a Makers Prop Studio's Stainless Steel Graflex Empire Strikes Back Luke Skywalker Lightsaber with Goth 3Design Graflex Master Chassis. Brass & Rust weathering artwork on chassis is done by us CIG.

Selling USD2300 (DHL Shipping & Paypal fees all included)

Specs below:
* KR Saber Elite Graflex 1" Blade Holder
* High Speed polished Nickel Steel Chassis
* Polished Brass Crystal Chamber
* Real Clear Quartz crystal
* Proffie soundboard V2 OS5.7
Soundfonts
* 2 x Luke & Yoda
* 1 x Darth Vader sound tracks
* 2 x Star Wars sound tracks
* 1 x Imperial March Neopixel Blue blade effect
* 1 x Blue Blade
* 1 x Deep Sky Blue Blade
* 1 x Red Blade
* 1 x Neopixel accent (Crystal Chamber) Similar to blade color
* 1 x strip neopixel (Turbine effect)
* KR 28mm Brass speaker
* CC saber Neopixel PCB
* Keep power18650 battery
* Black storage case
* 3.7v Charger 2.1mm

[Work-in-progress] It’s been a while! Currently I’m working on this Luke Skywalker ESB lightsaber. It’s a Makers Studio ...
06/03/2021

[Work-in-progress] It’s been a while! Currently I’m working on this Luke Skywalker ESB lightsaber. It’s a Makers Studio Stainless Steel Replica Graflex with Goth 3Design Master Chassis.⚡️

- KR ELITE GRAFLEX 1" BLADE HOLDER
- Proffie V2.2 clear board

Address

Woodlands

Website

Alerts

Be the first to know and let us send you an email when CIG posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to CIG:

Share

Category