Eisenman Guitars

06/27/2026

This is a video of a guitar that came in for a visit and a photo shoot, after leaving the shop in 2025.

06/26/2026

1945 00-18 on the bench last week. A brief rest on the bench, now it's back to work!

06/25/2026

03/09/2026

Little buddy left her winter jacket in this J45. On second thought, I think that brace inside looks fine.

02/07/2026

Now how'd that get in there? 1976 Martin D35, and I'd do it again!

02/07/2026

Doing some chiropractic work on this Martin 59' 0-15

11/12/2025

A little late for Halloween, but the Stratocaster SG Frankenstein is coming together well

11/10/2025

This custom build is going home this week. Cedar top, ovangkol back and sides. I'm really looking forward to hearing the music it's going to make!

06/26/2025

06/21/2025

I recently had a 1943 00-18 on my bench, with a chronic bellying issue due to a replaced bridge plate, which left voids where the previous plate was tucked into the x brace. The X brace had been glued several times, and the best way to fix it was to pull the plate, and fill the voids. The bridge was also shaved and needed to be replaced because it was also getting a neck reset. Both were glued with epoxy, which changed the game. No amount of heat or moisture would budge them, so I routed off the bridge, and disintegrated the plate with a counterbore. The top required a two part patch, one to replace the old patch which housed the pin holes, and another that I made on my duplicator, to repair missing material, and bring the gluing surface level with the finish. Anybody made it this far? Eyes glazed over?