Buckshot Racing #77 Speed Store

Call Directions Website

Buckshot Racing #77 Speed Store Buckshot Racing #77 LLC is a performance-driven marine brand built on real-world racing, precision engineering, and proven results on the water.

Buckshot Racing is the 77 NGK F1 tunnel boat and 007 STV Mod VP racing entries. We are also the home of the Buckshot Cleaver, a racing propeller designed for professional high-performance boat racers. Buckshot Cleavers are manufactured in the USA by Hill Marine in Santa Ana, CA. Red SUPER WIRE for Mercury V6 racing was created by Buckshot Racing 77. Contact Mike Hill for more information on a complete line of outboard performance parts and propellers!

The Mercury OEM 2.5 Liter 7-Petal Tall-Deck Cylinder Block Assembly, available through Buckshot Racing  #77, provides en...
11/05/2026

The Mercury OEM 2.5 Liter 7-Petal Tall-Deck Cylinder Block Assembly, available through Buckshot Racing #77, provides engine builders with a brand-new, factory-fresh Mercury V6 two-stroke steel-sleeve block and matching crankcase front half.

Featuring the desirable tall-deck design for O-ring or gasket cylinder heads and high-performance non-idle-relief steel sleeves, this assembly offers an excellent foundation for Mercury 2.5L high-performance Carb, Laser EFI, DFI, SportJet engines, lake motors, restorations, and custom racing builds.

Unlike a used or reconditioned block, this Genuine Mercury assembly includes new cylinder sleeves, original machined surfaces, and a matched crankcase assembly without decades of operating history. Info, pricing, availability here: https://www.buckshotracing77.com/product-page/7-petal-cylinder-block-assembly-mercury-25-liter-oem

Mercury Racing Relief Cover vs. Stock Poppet Valve Cooling 🏆Mercury’s production V6 two-stroke outboards and its dedicat...
10/31/2026

Mercury Racing Relief Cover vs. Stock Poppet Valve Cooling 🏆

Mercury’s production V6 two-stroke outboards and its dedicated racing engines were designed around very different operating conditions. That difference is easy to see in the cooling system.

Most conventional 2.0L, 2.4L, and 2.5L Mercury fishing and recreational V6 outboards use thermostats together with a spring-loaded poppet, or pressure-relief valve. Mercury Racing eliminated that more complicated arrangement on several race engines and used the much simpler 99193 relief valve cover.

The reason is not simply to make the engine “run colder.” The real objective is to make cooling-water discharge more predictable during sustained high-RPM operation.

Full Tech Article Here 👇

https://www.buckshotracing77.com/post/mercury-racing-relief-cover-vs-stock-poppet-valve-cooling

Flush 200R, 250R, 300R, 400R and 450R outboards the proper way!  Back in-stock, ready to ship for $99.95. Protect your i...
10/31/2026

Flush 200R, 250R, 300R, 400R and 450R outboards the proper way! Back in-stock, ready to ship for $99.95. Protect your investment. ⚓️🚤

https://wix.to/6Z4k84H

Buckshot Racing  #77 Crankshaft Holder Tool for Mercury 2.0L and 2.5L V6 two-stroke rebuilds.Designed to secure the cran...
10/27/2026

Buckshot Racing #77 Crankshaft Holder Tool for Mercury 2.0L and 2.5L V6 two-stroke rebuilds.

Designed to secure the crankshaft during powerhead assembly so builders can install pistons and rods, rotate the assembly, verify ring and bearing movement, check clearances, inspect deck height, and distribute assembly l**e before sealing the block.

Built for serious Mercury engine builders.

10/17/2026

Run it high. Keep it fed. Let it eat.

Buckshot Racing #77 low-water pickup nose cone built for surfacing setups and high-performance lower units.

Custom installation by Marty Powell.

Buckshot Racing #77 Speed Store
714-697-1716

MercuryRacing PerformanceBoating

10/12/2026

New Mercury Racing DTS Performance Foot Throttle Pedal — 8M0245913

Built for compatible Mercury DTS systems, the 8M0245913 Performance Foot Throttle Pedal gives high-performance boaters precise electronic throttle control while keeping both hands on the wheel.

Compact, clean, and designed for serious performance applications.

Available from Buckshot Racing #77 Speed Store.

BuckshotRacing77

🔧 SAVE THIS: Mercury V6 Fly-Cut Rule of ThumbMilling a 2.0L / 2.4L / 2.5L V6 head? Here's the number to know:0153" of cu...
10/07/2026

🔧 SAVE THIS: Mercury V6 Fly-Cut Rule of Thumb

Milling a 2.0L / 2.4L / 2.5L V6 head? Here's the number to know:
0153" of cut ≈ 1cc of chamber volume (2.25" pocket diameter)

CC your head → subtract your target → multiply by .0153" → that's your estimated cut. Always re-CC before your finishing pass — every casting's a little different.

Full guide, chart, and printable shop card at the link. 👇

https://www.buckshotracing77.com/post/how-much-to-fly-cut-a-mercury-v6-head-per-cc-2-0l-2-4l-2-5l

Mercury V6 ignition problems can get expensive fast if you start throwing parts at them.We put together this Buckshot Ra...
10/02/2026

Mercury V6 ignition problems can get expensive fast if you start throwing parts at them.

We put together this Buckshot Racing #77 Mercury V6 Ignition Diagnostic Chart as a quick reference for DVA testing, stator and trigger checks, resistance specs, and common no-spark troubleshooting. Save it. Print it. Keep it in the shop.

09/30/2026

Buckshot Racing Speed Store just finished custom hull ID tags for the F1 Composites #77 driven by Mike Hill and the Aeroslot #20 driven by Ashton Rinker.

A small finishing touch for two race boats built to run hard and look right doing it.

Buckshot Racing #77

BuckshotRacing77 Aeroslot F1Composites

Address

Bradenton, FL
34211

Opening Hours

Monday 8am - 6pm
Tuesday 8am - 6pm
Wednesday 8am - 6pm
Thursday 8am - 6pm
Friday 8am - 6pm
Saturday 8am - 12pm

Telephone

+17146971716

Alerts

Be the first to know and let us send you an email when Buckshot Racing #77 Speed Store posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Sponsored

Share

Nearby shops