Innofader

10/01/2026

Dj Ease had put out some of the best content this week. Putting the Hercules Audio T10 through its paces and showing you what it’s capable of! Will ya look at this….wooooo!

09/24/2026

Let’s go! Cats out the bag! Hercules Audio and Innofader the first 10” platter controller. Don’t let the belt drive fool you. The T10 has more starting torque than a 1200 and weighs less than one turntable.

The fader has been designed to provide sharp accurate cuts and perform for years to come. Backed by Innofader and our 20 years making non contact crossfaders the InduXfader is a design many will enjoy no matter the skill level.

Tension adjustment from feather light to heavy, curve and cut leg controls right on the front of the unit.

Stay tuned as you will see so much more from these brands as we form like Voltron to bring you something fresh!

09/06/2026

INNOFADED!

The Rane System One now works with the Innofader Rane 1-70-72 using an updated adapter! All of our new production will have this adapter.

To be safe, you can order from us directly here:
https://store.innofader.com/products/Innofader-Rane-1-70-72-p490925645

And make sure you select "Yes" for "Rane System One Support.

This is a nice controller!

https://www.rane.com/system-one/

The innoFADER Rane 1-70-72 is a single package which includes all of the adapters you need to replace the Mag3 or Mag4 fader in your Rane One, Seventy, Seventy Two, and any Rane Controller including the Rane Four and Rane Performer. Based on the innoFADER PNP3, it shares the same precision output an...

08/28/2026

08/28/2026

TO ALL ECLER NUO 2.0 OWNERS:

Not sure if any of you remember from the Skratchworx days (btw thank you for the great memories Mark Settle!), but there was a time when we discussed how the Nuo 2.0 had some delay on the crossfader sensing circuit which required a modification. Years after the discussion, I searched to see if anyone documented the detail of this fix but couldn’t find anything. I even contacted Ecler requesting this information but couldn’t get anything. Ecler like many companies does not release schematics and considers them proprietary information.

So months later, I finally have a customer willing to temporarily part with this beloved mixer so I could figure out the issue. I traced out the circuit and found that the VCA signal had a built in 20msec ramp on the sound level control. With this delay, the cuts sound very swishy. So I shortened this delay to 1msec and the nice sharp punch sound we know for scratching came out 🙂

I’ve attached picture showing how to locate the components. They’re on the front panel PC board of the mixer which makes the disassembly much easier. The faceplate also needs to be removed if you’re switching to an Innofader.

The fix is pretty simple. For the two marked capacitors, they need to be replaced with 0.01uF capacitors rated for minimum 6.3V. Capacitors should be 0805 size for ease of installation but 0603 size also works.

Another update is the isolation circuit. For some odd reason, all of the Ecler Eternal compatible mixers require this update. Without this update, the cut it “noisy” due to grounding issues. In addition to putting sticky washers on the faders itself, you put the washers under the screws. This provides full electrical isolation, and allows for the full strength of the metal. Thanks a million to Danny Crisologo aka “DJ Damn Danny” for sharing this idea! Sometimes it takes DJs like you to figure these things out as my engineering brain can get stuck sometimes!

I’ll get this update up on our website shortly.

Happy scratching!

08/06/2026

Hello everyone,

Again our website is down temporarily. Please email me directly at [email protected] if you need anything urgently. Thanks!

You can still order directly from our online store at crossfader.store

Thanks and sorry for all of the trouble!

Elliot

06/26/2026

Hey All,

We have a new addition to the Innofader product line. The mini Innofader PTB2 is available and ready to ship. Specially designed to fit and work in the Reloop PTB2 mixer.

You can order here:

Now it's super easy and affordable to upgrade your Reloop PTB2 to turn it into a solid scratching machine! The mini Innofader PTB2 is a mini Innofader Plus-S modified to plug straight in and cut immediately. No fuss, no mess. Simple kit, just the fader and 2 k***s. NOTE: Images are with the Korg Han...

06/02/2026

Hello everyone. Please note our website and email are down. We are actively working to get this fixed ASAP.

UPDATE 6/3/2026 Website is fixed now!

In the meantime, if you have any questions, please message us directly here or call Pat at 251-500-0708 or Elliot at 657-253-8727. Or if you prefer, you can send email to may backup email at [email protected] Thanks!

04/05/2026

Here’s my latest ad and it’s not for sale 🤣🤣🤣

Special thanks to Paul Scratch for the idea!

03/22/2026

2PM Eastern follow the link below to watch the 10th annual Baltimore Blend BAttle. Tim Jones has created a Battle like none other! Djs from all over the globe will be in the building! Its Sunday, tune in and support GOOD PEOPLE!

https://www.baltimoreblendbattle.com/?fbclid=IwY2xjawQtB75leHRuA2FlbQIxMABicmlkETFzU2FCNXcxNkV4d3l1OXpsc3J0YwZhcHBfaWQQMjIyMDM5MTc4ODIwMDg5MgABHq7-f8swe3ifrfPKnYVXb_PtYoHV_ZRvYNVB22c2pncHpnhs-KrCngeVx-6X_aem_X7jdne-bAPKB9agm83FrCQ

The Baltimore Blend Battle is not just a DJ competition; it's a celebration of creativity, skill, and innovation in the world of DJing. Since its inception in 2015, our event has grown to become a cornerstone of the DJ community, attracting top talent from across the United States.