Daytona Helmets

Call Directions

Daytona Helmets Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Daytona Helmets, Shopping & retail, 1810 Mason Avenue, Daytona Beach, FL.

Biketoberfest Bike Night. This Friday at Daytona Helmets.Stop by, check out the latest helmets, grab some free BBQ, and ...
10/13/2026

Biketoberfest Bike Night. This Friday at Daytona Helmets.

Stop by, check out the latest helmets, grab some free BBQ, and hang with the Daytona crew.

Friday, October 16 | 5–7 PM
📍 1810 Mason Ave, Daytona Beach, FL

All bikes. All riders. Everyone’s welcome.

Your helmet stop for Biketoberfest 2026. 35 years in Daytona Beach and still going strong.From half shells to full face ...
10/12/2026

Your helmet stop for Biketoberfest 2026. 35 years in Daytona Beach and still going strong.

From half shells to full face and modular helmets, find your next helmet with a professional fitting at either of our Daytona locations.

📍 Speedway Booth
2203 W International Speedway Blvd.

📍 Daytona Helmets HQ
1810 Mason Ave.

Two locations. Every style. The right fit. See you at Biketoberfest. 🤘

Your helmet stop for Biketoberfest 2026.35 years in Daytona Beach and still going strong.From half shells to full face a...
10/11/2026

Your helmet stop for Biketoberfest 2026.

35 years in Daytona Beach and still going strong.

From half shells to full face and modular helmets, find your next helmet with a professional fitting at either of our Daytona locations.

📍 Speedway Booth
2203 W International Speedway Blvd.

📍 Daytona Helmets HQ
1810 Mason Ave.

Two locations. Every style. The right fit.

See you at Biketoberfest. 🤘

10/05/2026

Featherweight. Built for the adventures ahead.

Just 3.15 lb of pure carbon fiber with the modular convenience to go wherever the ride takes you.

C6 PRO Carbon - $699.95

🏍️: Stephan Bacchus
📸: RevvedUp Media | Cinematic Car Content

10/03/2026

FORGED (CRUSHED) CARBON vs. TRADITIONAL WEAVE CARBON

Which one are you choosing? Or both😏

Take an up-close look at the newest Forged Carbon Fiber C6 PRO side-by-side with our traditional Weave Carbon Fiber C6 PRO.

Both helmets:
• Start at just 3.15 lb
• Full carbon modular construction
• DOT + ECE 22.06
• Include a Photochromic Smoke Shield
• Include our OptiVision anti-fog lens

So what’s the difference?

🔥 FORGED CARBON
The forged version features a carbon fiber rear spoiler and a much more labor-intensive manufacturing process. Each carbon flake is hand-laid over a weave carbon shell, creating a completely unique pattern.

No two helmets look exactly alike.

⚡ WEAVE CARBON
The standard C6 PRO keeps the classic lightweight carbon weave shell with a smoke rear spoiler and that timeless carbon fiber look.

It’s clean, proven, lightweight, and about as dependable as that one riding jacket you refuse to retire.

So… FORGED or WEAVE? 👇

10/01/2026

Built for real riders. Built for real miles.

The Daytona C6 PRO Carbon Fiber is made for the riders who actually put their gear to work. Long days, hard miles, and everything in between.

Proven on the road by Stephan Bacchus

🎥 Shot by RevvedUp Media | Cinematic Car Content

Daytona Beach, FL, USA🇺🇸

HarleyDavidson

09/30/2026

Your helmet takes care of you, take a few minutes to take care of it. 🧼

This quick visual tutorial walks through how to properly disassemble, clean, lubricate, and maintain your modular helmet to help keep everything operating smoothly for many miles ahead.

One of the easiest ways to shorten the life of your helmet is to never clean or maintain the moving parts. After a long ride, especially after bugs, rain, dust, or heavy road grime, take a few minutes and clean your gear.

STEP 1 — CLEAN YOUR SHIELD
For photochromic shields, use WATER ONLY. Avoid chemicals, cleaners, or solvents that could damage the photochromic coating.

STEP 2 — DISASSEMBLE & CLEAN THE JAW
Remove the jaw assembly and clean the areas around the moving components using mild soapy water and a cleaning brush. Remove road debris, dirt, bugs, and grime that can build up around the mechanism.

STEP 3 — RINSE & DRY
Remove any remaining soapy water and thoroughly dry the helmet. Use a clean microfiber towel to eliminate water spots and moisture.

STEP 4 — CLEAN THE METAL HINGES
Pay close attention to the metal locking hinges that secure the jaw. Make sure they are clean and completely dry.

STEP 5 — LUBRICATE THE HINGE
Apply a small amount of silicone-based lubricant to the hinge mechanism. Cycle the jaw open and closed several times to allow the lubricant to work into the moving components.

STEP 6 — CONDITION THE SHIELD GASKET
Apply a light amount of silicone lubricant to the shield gasket, then gently wipe away any excess.

STEP 7 — REASSEMBLE & CHECK
Reinstall everything and cycle the shield and jaw several times. Make sure everything is operating smoothly and locking properly before getting back on the road.

A little maintenance goes a long way. Keep it clean, keep the moving components lubricated, and your helmet will be ready for many miles ahead. 🏁

09/28/2026

Is your helmet shield fogging up?

Every Daytona Helmets full-face and modular helmet includes a FREE anti-fog lens designed to help keep your vision clear when moisture, humidity, and hot breath start building up inside your helmet.

In this video, our tech demonstrates exactly how it works:

• First, we show how quickly a helmet shield can fog when exposed to moisture and warm breath.
• Then, we properly install the OptiVision 200 Anti-Fog Lens into a C6 shield.
• Finally, we put it to the test with constant steam applied directly to the shield.

Watch closely, the exposed corners of the shield and side plate begin to fog, while the area protected by the OptiVision 200 stays clear and ready for the road ahead.

Proper installation makes all the difference.

Not sure which anti-fog lens fits your Daytona helmet or shield? Send us a DM or email our team anytime. We’ll make sure you get the correct setup.

09/28/2026

🔥 ALL-NEW FORGED GREY CARBON FIBER C6 PRO 🔥

This video shows what photos simply can’t, the true depth, texture, and finish of forged carbon fiber. Every angle catches the light differently, giving each helmet its own aggressive, premium look.

The C6 PRO Forged takes our flagship modular to another level:

• Forged carbon fiber shell
• Full carbon fiber jaw piece
• Carbon fiber rear spoiler
• Photochromic Smoke outer shield INCLUDED
• DOT + ECE 22.06 certified
• Starting at just 3.15 lbs
• Premium upgraded fit, finish & hardware
• Built for riders who refuse to compromise

Retail: $899.95

From the carbon weave to the final forged layer finish, this is a helmet you need to see up close to truly appreciate.

Questions about sizing or fitment? DM us before ordering and we’ll help get you dialed in.

Quality goes into every product we make and that same level of care continues with the customer service behind it. Revie...
09/27/2026

Quality goes into every product we make and that same level of care continues with the customer service behind it. Reviews like this are exactly why we take fitment seriously. 💪

Buying a helmet online shouldn’t feel like a guessing game. If you have any hesitation about sizing or fitment, reach out before ordering. DM us, call us or email our team with your head measurement ready, and we’ll help get you dialed in the first time!

📞: 1.800.452.5745
💻: [email protected]

Address

1810 Mason Avenue
Daytona Beach, FL
32117

Opening Hours

Monday 9am - 5:30pm
Tuesday 9am - 5:30pm
Wednesday 9am - 5:30pm
Thursday 9am - 5:30pm
Friday 9am - 5:30pm

Telephone

+18004525745

Website

Alerts

Be the first to know and let us send you an email when Daytona Helmets posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category