Mr Fence Tools

Mr Fence Tools We design, test and build some of the most innovative tools currently in the fence industry. https://form.jotform.com/221854165981160

10/01/2026

This isn't a donut. It's a steel connector - and it builds the strongest post you'll ever set 🔩

The UNI‑5 is galvanized, stamped steel (joist‑hanger tough) that locks your vinyl post to your steel post with 100% contact on all four sides - a full 360°. Press‑fit flanges kill the wobble the old donuts left behind, and concrete anchor pins beat screws on shear strength. Universal, too: .135, .155, T5, gate posts - one connector fits them all 💪

Stronger post. Zero wobble. Every time.
👉 mrfencetools.com

09/29/2026

Want a stronger fence AND a cheaper one? Run King Plus. 👑

Going 10 foot on centers cuts your post count ~25% - so you put that money into better posts without raising the price of the fence. Add four rails, cross-grain the top, and you've got a system that's strong, straight, and fast. ⚡

Then the magic: pin the bottoms, tip the tops, eyeball the grade with the 10‑5 rule (back 10, over 5), and the boxes settle into a perfect roll. No tape measures. No levels. 🎯

This 10‑footer? DONE. ✅
👉 mrfencetools.com

09/24/2026

A 10‑foot wood privacy fence that's faster to build, stronger than standard, AND cheaper? 👑 That's the KING+ method. ✅

Build the boxes, set the sections, walk away with a fence that stands taller and straighter than anything framed the old way. This one's DONE. 🙌
👉 mrfencetools.com

09/22/2026

🪵 It takes about a minute to drive a post.

⏱️ So we built a jig that lets one guy build the box in about a minute too.

Now your driver isn't standing around waiting. Two-man team pounds and builds at the same pace, and the boxes are ready as fast as the posts go in the ground.

Two 2x4s at 67", cut side down. 5½" picket flush both sides. Nail it on the marked notches - same pattern every single time 🔨 That's how box strength becomes predictable instead of hopeful.

King Plus Box Throne. Only from Mr. Fence Tools. 🔗 mrfencetools.com

09/17/2026

Driving tall posts? Add the Extension Handles. 📏

These 2-ft extension handles bolt onto your Patriot or Bull (same process for both) so you can drive taller posts without climbing. Simple swap - pull the throttle, seat the o-rings, bolt the handles, and the bottom bracket accepts up to a 4" post. ✅

Need more reach? There's a 48" version too. 💪
👉 mrfencetools.com

09/15/2026

🪏 Nobody wants to dig through asphalt. So we didn't.

⏱️ Full chain link job - cantilever gate posts driven 7 feet deep through old asphalt over a rock bed. Done solo in 57 minutes.

A dig-and-set crew is there all day, leaves concrete everywhere 🪣, and nobody can build on those posts until they cure.

The Fence Rex drives steel post up to 6⅝" 💪 - and one guy runs the whole machine. Drive it, load it, pound it, check plumb, all from the same seat. About 6x a skid steer pounder ⚡

Only from Mr. Fence Tools.

09/10/2026

The biggest portable compressor you can buy. Period.

Puma 38 CFM, 13 HP Honda - and the reason we run them at Mr. Fence: at idle it takes head pressure off the cylinders instead of just throttling down. Less fuel, cooler heads, longer pump life. Heat is what kills compressors, and this one stays cool.

10-gallon portable or 30-gallon mounted. Parts, filters and belts always in stock.

Questions or troubleshooting? Just call us. 👉 mrftools.com

09/08/2026

Gate opening an inch too small? No problem.

The InstaGate Kit from Mr. Fence Tools - a Cat 5 kit built on the same patented adjustable aluminum frame, now powder coated black with a narrower profile that lines up exactly with King Plus and Standard fence.

Adjustable width-wise, rackable, and every fastener you need is in the box - rivets, screws, lags, all of it.

And when the crew builds an opening 59" instead of 60"? You just cut the rails back an inch, re-drill the ends, and keep going. That's the beauty of building it on site.

Two versions available. Full build walkthrough in the video 👉 mrftools.com

09/03/2026

Make the Equalizer even faster. ⚡

Meet the new adjustable offset cable (the "Adjuster"). Instead of a fixed steel offset, this one adjusts - so you don't have to place your stakes perfectly. Drive them roughly in line, hook up, and fine-tune the length after. No more moving stakes. 🙌

One Equalizer can now flow around corners and knock out multiple returns. 🔥
👉 mrfencetools.com

09/01/2026

Perfect routed holes in aluminum posts - every time. 🎯

The Aluminum Template 2.1 (Easy Hole router kit) slips right over a 2" post and guides your router bit to a clean, correctly-sized hole for 1" residential rail. Pre-drill, drop the bit in, go clockwise… and it fits like a glove. 🧤

Even handles custom field re-routes when a rail has to move. ✅
👉 mrfencetools.com

Address

4515 Ohara Drive
Evansville, IN
47711

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+18126386657

Website

Alerts

Be the first to know and let us send you an email when Mr Fence Tools posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Mr Fence Tools:

Shortcuts

Share

Category