Canal Metalsmiths

Canal Metalsmiths We are a unique shop. Design, restorations, and manufacturing all in one stop! Classically trained craftsmen working in gold, silver, platinum, bronze, etc.

perform custom design and manufacturing. Everything from one of a kind jewelry to tableware, trophies, and custom lighting. Expert restorations on sculpture hollowware, antique brass and silver. We have done work for premiere auction houses, antique dealers, and collectors; locally and abroad.

GENTLY ….. cleaned this amazing button! So cool to hold a button from George Washington’s era!
08/29/2026

GENTLY ….. cleaned this amazing button! So cool to hold a button from George Washington’s
era!

Just repaired and refinished this statue of Mary and baby Jesus. Repaired the fractures , stripped the previous coat of ...
08/09/2026

Just repaired and refinished this statue of Mary and baby Jesus. Repaired the fractures , stripped the previous coat of paint, primed and repainted. Next , we attached the statue to a sturdy paver, which should help stabilize it .

Recently cleaned and straightened these ormolu candlesticks . The gold vermeil is mostly gone , but , these are a very ...
07/08/2026

Recently cleaned and straightened these ormolu candlesticks . The gold vermeil is mostly gone , but , these are a very cool pair of candlesticks circa the Victorian era. They have 3 agate bees on each stick. So cool !!! 🐝⚒️⚒️⚒️

Tim restored this amazing vintage iron sign . After paint stripper , he sandblasted and carefully picked off any remaini...
06/17/2026

Tim restored this amazing vintage iron sign . After paint stripper , he sandblasted and carefully picked off any remaining paint. Next , he painted it with oil based black paint. Last step was to size, and gild the detailing. They don’t make ‘em like this very often anymore! ⚒️⚒️⚒️

Busy day today! We installed this iron railing we restored , on the second story of a home in Rochester. Many thanks to ...
05/29/2026

Busy day today! We installed this iron railing we restored , on the second story of a home in Rochester. Many thanks to the roofers who set up scaffolding , and muscled the railing up! At 1:00 , we headed over to Oak Hill Country Club , and reinstalled the sign . Years of oxidation had made it difficult to read . Tim repainted the background , then scuffed off the surface paint, followed by 3 coats of uv light tolerant lacquer. ⚒️⚒️⚒️

Recently restored this bronze sculpture by L. Gregorio 1873. The arms had been broken off the female figure. There were ...
05/10/2026

Recently restored this bronze sculpture by L. Gregorio 1873. The arms had been broken off the female figure. There were brazed , filed, and sanded to blend the pins used to set the part s together , then a feaux finish was touched up to match the rest of the sculpture.⚒️⚒️⚒️

Little bronze moose dropped his antler…. no worries I resoldered it and gave him a fresh repatination. All is well! ⚒️⚒...
04/21/2026

Little bronze moose dropped his antler…. no worries I resoldered it and gave him a fresh repatination. All is well! ⚒️⚒️⚒️

This art nouveau frame had been cut down in size, leaving broken and mismatched corners. We disassemble it and rearrange...
04/18/2026

This art nouveau frame had been cut down in size, leaving broken and mismatched corners. We disassemble it and rearranged the pieces so the detailing lined up properly. Then, glued it and filled in missing floral details with a mixture of lime plaster ,and wood glue. Once sanded , the details were colored to match . ⚒️🎨🖌️

Just wrapping up the detailing on this chariavari . I cut the raised wording out of sterling sheet . Each was cut out wi...
04/14/2026

Just wrapping up the detailing on this chariavari . I cut the raised wording out of sterling sheet . Each was cut out with a jewelers saw , drilled with two holes , and had two small pins soldered in place . Then each letter was riveted into the corresponding holes on the shield. A little sanding and minor polishing after oxidizing the area around the wording. ⚒️⚒️⚒️

Stop by the Rochester International AirPort, and check out the newly renovated Veterans area. The bronze fallen soldier ...
12/05/2025

Stop by the Rochester International AirPort, and check out the newly renovated Veterans area. The bronze fallen soldier cross sculpture we fabricated is displayed there. Bless all who have served.🙏

Address

1000 Turk Hill Rd Suite #120
Fairport, NY
14450

Opening Hours

Monday 10am - 5pm
Tuesday 10am - 5pm
Wednesday 10am - 5pm
Thursday 10am - 5pm
Friday 10am - 5pm

Telephone

+15852237540

Website

Alerts

Be the first to know and let us send you an email when Canal Metalsmiths posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Canal Metalsmiths:

Shortcuts

Share

Category