What are the opening hours?

Monday 9am - 6pm Tuesday 9am - 6pm Wednesday 9am - 6pm Thursday 9am - 6pm Friday 9am - 6pm

MatterHackers, Inc.

Home
United States
Foothill Ranch, CA
MatterHackers, Inc.

Call Directions Website Contact the business

MatterHackers is dedicated to enabling 3D printing. MatterHackers is headquartered in beautiful Orange County, California.

Order online for fast shipping at www.matterhackers.com, and call or email us with questions about anything digital fabrication. For every kind of digital fabrication - 3D printing, CNC, resin printing, and more, we are working hard to enable people to turn the ideas they have into the things they use.

10/28/2026

Most multi-material printing still comes down to one nozzle doing several jobs. The Bambu Lab X2D Combo takes a different route with a true dual-nozzle architecture, which means two independent hotends rather than one shared across materials. Each holds its own temperature, so you can pair a model material with soluble supports, or run a rigid body and a flexible gasket in the same job, without a tool change between them. Build volume is 256 x 256 x 260 mm on the main nozzle and 235.5 x 256 x 256 mm when both are in play.

The rest of the machine is built for materials that usually push people toward an enclosure upgrade. Nozzles reach 300°C and the chamber actively heats to 65°C, which is the combination that makes ABS, ASA and polycarbonate practical instead of a fight with warping. Hardened steel nozzles and extruder gears handle filled and abrasive filaments, and you can swap between 0.2, 0.4, 0.6 and 0.8 mm. The toolhead moves at up to 1000 mm/s with 20,000 mm/s² acceleration, flow runs 40 mm³/s standard or 65 mm³/s with the optional high flow hotend, and the bed hits 120°C across four plate types. The Combo ships with an AMS 2 Pro.

The Basic bundle includes MatterHackers Launchpad, so an expert gets the machine set up, calibrated and printing with you rather than leaving it in the box. Our service team can also help you sort out which configuration fits the materials you actually run.

Shop Now → https://www.matterhackers.com/r/ycHLWn

10/28/2026

Join us Tuesday, November 3rd at our Lake Forest HQ for a free two hour class on the eufyMake E1, taught by one of our service experts with a eufyMake representative there to answer any questions you may have.

We will go through the full flatbed workflow, from preparing your file to pulling a finished piece off the bed. The E1 prints full color directly onto 300+ materials and builds a raised texture you can actually feel, which is the part that does not come across until you are holding one.
Bring your design in JPG, PNG, PDF, SVG, PSD or AI. Materials are provided, the class is free, and whatever you print is yours to keep. Spots are limited.

Sign up → https://www.matterhackers.com/r/IGApp7

10/27/2026

Build your own Halloween Filament Bundle and the sixth spool is on us.

The Halloween Bundle Builder lets you pick any six Halloween-ready spools and you get the sixth spool for free. Pumpkin and mandarin orange, deep blacks, purples, and glow-in-the-dark, across PLA, PETG, ASA, and flexible TPU, in matte, silky, and specialty finishes, from MH Build Series and PRO Series to Bambu Lab. Mix materials freely: PLA for props that stay indoors, ASA for the decorations going out on the porch where UV and weather will find them, TPU for anything that needs to squish.

One tip if glow-in-the-dark is going in your cart. The glow comes from phosphor particles blended i nto the plastic, and those particles are abrasive, so run a hardened steel nozzle. Glow filament also charges brighter and holds longer the more light it gets beforehand, so a lamp near your display shelf earns its keep.
Free US shipping over $35, same-day shipment on orders placed by 1pm PT, and 3% back in rewards on every qualifying order.

Save and Bundle Now → https://www.matterhackers.com/r/DzOTsd

10/27/2026

Black Friday is a month away. These prices are not. FLUX is on sale right now across the lineup, with $2,090 off the HEXA RF 80W, $1,000 off the 60W, $500 off the 30W, $591 off the Beambox II, and $200 off the new Beamo II Compact. No waiting for a date on a calendar, no watching a countdown clock, no hoping the configuration you want is still in stock at midnight.

The HEXA RF is the one worth looking at twice. It is an industrial grade RF metal laser that handles wood, leather, fabric, stone, glass, clear acrylic and anodized metal, and right now every HEXA RF purchase comes with a free chuck rotary. That attachment is what turns a flatbed machine into one that can engrave tumblers, bottles, glassware, knife handles and anything else cylindrical, which is where a lot of the actual revenue lives for shops doing custom work.

If you are weighing wattage, or trying to work out whether the 30W covers what you need or you should size up, our expert service team can talk through materials and throughput with you before you commit. Launchpad is available to get the machine set up, calibrated and cutting once it lands.

Save Now → https://www.matterhackers.com/r/TKHo5e

10/26/2026

Join us Tuesday, November 3rd at our Lake Forest HQ for a free two hour class on the eufyMake E1, taught by one of our service experts with a eufyMake representative there to answer any questions you may have.

We will go through the full flatbed workflow, from preparing your file to pulling a finished piece off the bed. The E1 prints full color directly onto 300+ materials and builds a raised texture you can actually feel, which is the part that does not come across until you are holding one.

Bring your design in JPG, PNG, PDF, SVG, PSD or AI. Materials are provided, the class is free, and whatever you print is yours to keep. Spots are limited.

Sign up → https://www.matterhackers.com/r/IGApp7

10/26/2026

The WAZER Pro cuts cold. It drives filtered tap water and garnet abrasive through a 0.021 inch or***ce at up to 8,600 psi, eroding the material away instead of melting it. The edge comes off the bed with its temper intact, no warping, and no secondary cleanup.

Cutting cold also means one machine handles materials a laser cannot touch at all. Aluminum up to 1 inch thick and steel up to 3/8 inch, plus titanium, tool steel, stainless, brass, copper, carbon fiber, polycarbonate, acrylic, ceramic and porcelain tile, marble, granite, and stained or fused glass. In one 90 minute session the Pro cut over 1,000 fused glass circles at 15mm across and 3mm thick. The cutting area is 12 by 18 inches with a 0.044 inch kerf, and it runs on filtered tap water and single phase power inside a 46 by 27 inch footprint.

A waterjet is a bigger commitment than a printer. Come see one in person at our Lake Forest showroom, and when you are ready, Launchpad pairs you with an expert for setup, calibration and your first cut while our service team walks you through the water, drain and power requirements.

Shop Now → https://www.matterhackers.com/r/EuP7Om

10/25/2026

Ghosts, pumpkins, and a four-toolhead printer.

Halloween prints are exactly the job that exposes how a printer handles color. An orange pumpkin with a brown stem, a white ghost with black eyes: two colors minimum, usually more, and on most machines every one of those transitions means purging filament into a bin. The Snapmaker U1 gives each color its own toolhead. It picks up the one it needs, prints, sets it back down, and moves on, so a batch of decorations doesn't come with a pile of wasted plastic sitting next to it.

It has the speed for a whole porch's worth before October runs out, too. 500mm/s toolhead speed, 20,000mm/s² acceleration, and 32mm³/s max flow through a 300°C stainless steel hotend, in a 270mm cubed build volume. Mesh bed leveling, automatic calibration, filament runout and air-print detection, and a chamber camera so you can watch the batch from your desk.

Order by 1pm PT and it ships the same day, free on orders over $35, with 3% back in rewards. Our US-based team is here if you need a hand dialing it in.

Shop Now → https://www.matterhackers.com/r/TJ8ARl

10/24/2026

10/23/2026

If you are outsourcing SLS or holding off on tooling for a part in the mid volume band, the math changes once the capacity sits on your own floor. The Fuse X1 gives you a 330 x 330 x 565mm chamber, 61.5 liters, and because SLS parts are supported by the surrounding unsintered powder, you nest in three dimensions and fill it to better than 30% density by volume and 48% by mass. A 120W ytterbium fiber laser closes most large builds in under 24 hours, with a same day option that delivers large parts in five hours. That moves your lead time out of a service bureau queue and onto your own production schedule.

The operating economics are where it earns its place. Build Unit changeovers take five minutes, so the machine returns to work while the previous build cools rather than losing a shift to cooldown. The Fuse Sift X1 holds three to five builds worth of used powder, and a refresh rate as low as 20% means most of what you load gets reclaimed, which is the single biggest lever on your consumable cost per part. Print Intelligence and Adaptive Thermal Control hold the chamber steady across long runs, which matters when you are qualifying a part rather than printing a one off. Formlabs positions the platform as cost competitive with injection molding into the tens of thousands of parts, and it installs through a standard door with no facility retrofit, so adding the capacity is a machine purchase rather than a building project.

Our engineers can model throughput, powder consumption and cost per part against your actual geometry before you commit, and our expert service team supports the machine on your floor once it ships.

Request a Quote Now → https://www.matterhackers.com/r/zyIj08

10/22/2026

Most printing happens on paper or on a transfer that then has to get onto the thing you actually care about. The eufyMake E1 skips that. It prints full color directly onto the finished object at 1440 dpi using CMYK plus white and gloss, across more than 300 materials including wood, metal, acrylic, glass, ceramic, stone, leather, canvas and film. A white underbase keeps color accurate on dark or clear surfaces. Dual lasers and an 8MP camera handle positioning and auto level to within 0.5mm, so you set the object on the bed and print rather than building a jig for every shape.

What makes it different from other UV printers is that it does not stop at color. Amass3D stacks layers of white and gloss UV ink to build relief up to 5mm tall, then lays the image over the top, so you get embossed logos, leather grain, canvas weave and raised brushwork you can actually feel. The 13 by 16.5 inch flatbed covers signage, panels and plaques, and the rotary attachment handles tumblers, bottles and mugs from 3.1 to 9.6 inches tall. The software ships with more than 20,000 templates plus AI tools that generate 3D textures, remove backgrounds and apply art styles, which takes most of the setup work off your plate.

Shop Now → https://www.matterhackers.com/r/rj7TCy

Address

Foothill Ranch, CA

Opening Hours

Monday	9am - 6pm
Tuesday	9am - 6pm
Wednesday	9am - 6pm
Thursday	9am - 6pm
Friday	9am - 6pm

Telephone

+18006134290

Website

https://www.matterhackers.com/

Alerts

Be the first to know and let us send you an email when MatterHackers, Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.