Moss Firearms, LLC

Moss Firearms, LLC We specialize in quality custom gunsmithing. The best way to contact us is by calling 706-692-6672 during our normal operating hours.

If you decide to contact us any other way expect a delayed response. Appointments can be made for after hours drop offs and pick ups. Appointments can also be made Saturdays and Sundays.

Smith & Wesson 642-1: This one was in for an optic. I retro fit an optics plate designed for a C**t Python to fit the J-...
09/25/2026

Smith & Wesson 642-1: This one was in for an optic. I retro fit an optics plate designed for a C**t Python to fit the J-frame. Love the way this one turned out.

Henry Supreme: in for a barrel swap. From 300 BLK to 338 ARK.
08/14/2026

Henry Supreme: in for a barrel swap. From 300 BLK to 338 ARK.

G***k 17 Gen 4: This one was in for an optic cut, single port comp, front sight re-location, double under-cut, and Tacti...
08/12/2026

G***k 17 Gen 4: This one was in for an optic cut, single port comp, front sight re-location, double under-cut, and Tactical Grey H-227 Cerakote.

Pure Precision SKLTN: This action was in to be barreled in 280 AI using a proof research blank. The muzzle end was threa...
07/31/2026

Pure Precision SKLTN: This action was in to be barreled in 280 AI using a proof research blank. The muzzle end was threaded in 5/8x24, it is sitting in a Peak 44 carbon stock.

07/29/2026

Hey guys! I am upgrading my 3d print set up. I will be getting rid of my old printer. I have an upgraded Ender 5 pro that will need a new home. Call me at the shop if your interested.

07/22/2026

Setting up the mill to cut optics. If you want a slide cut, get it to me.

Mosin Nagant M91/30 PEM conversion: conversion included drilling the receiver for index pins, drilling and tapping for m...
07/21/2026

Mosin Nagant M91/30 PEM conversion: conversion included drilling the receiver for index pins, drilling and tapping for mounting screws, machining mounting screw heads for lock screws, inletting the stock to accommodate the scope base.

McMillan Tac-50 x2: In to have Lilja barrel's cut and chambered in 50 BMG (barrel's hardly fit in the lathe). These brut...
07/09/2026

McMillan Tac-50 x2: In to have Lilja barrel's cut and chambered in 50 BMG (barrel's hardly fit in the lathe). These brutes tipped the scale at 34.6 pounds and are 5.8 ft in overall length w/ suppressor installed. Both ri**es are sitting in Cadex chassis'. The barrel's alone weigh in at 15 lbs. Don't get a chance to work on these big boomers very often and enjoyed these builds. (pictured w/ suppressed 24" 6mm Creedmoor for reference to size.)

Romanian Micro Draco: This one was in for a registered SBR conversion. The rear sight block was swapped for a standard c...
06/30/2026

Romanian Micro Draco: This one was in for a registered SBR conversion. The rear sight block was swapped for a standard configuration block allowing us to install a TWS top cover. The rear trunnion was drilled and tapped to accept an SLR side folding stock.

Saiga Sporter 223 conversion: this was in for a front/rear end conversion, hole weld up and riveted trigger guard instal...
06/25/2026

Saiga Sporter 223 conversion: this was in for a front/rear end conversion, hole weld up and riveted trigger guard install.

Address

49 Red Oak Lane
Jasper, GA
30143

Opening Hours

Monday 10am - 2pm
Tuesday 10am - 2pm
Wednesday 10am - 2pm
Thursday 10am - 2pm
Friday 10am - 2pm

Telephone

+17066926672

Website

Alerts

Be the first to know and let us send you an email when Moss Firearms, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Moss Firearms, LLC:

Shortcuts

Share

Category