Lenny Miles - Aramsco Surface Prep

09/07/2026

Celebrating the hard work that keeps our industries moving. 💪

Aramsco locations will be closed Monday, September 7th, with normal business hours returning Tuesday, September 8th.

07/21/2026

😎

The wrong tools can lead to inadequate preparation and unnecessary job expenses—stop burning through your tooling! 🛑

Visit aramscosurface.com or call 844-393-7699 to speak with a rep today! 📲

07/21/2026

Before applying epoxy or floor coatings, moisture testing is critical. Learn why concrete moisture testing matters, the best testing methods, and how to prevent costly coating failures.

07/13/2026

07/13/2026

Learn why cheap diamond tooling can cost more over time and how choosing the right pads improves performance, durability, and long-term value.

06/05/2026

🚨 Using the wrong tooling bond can cost you production, tooling life, and profits.

Here's a quick rule of thumb:

🟢 Soft Concrete (1-3 Mohs) → Hard Bond
🔵 Medium Concrete (4-6 Mohs) → Medium Bond
🔴 Hard Concrete (7-9 Mohs) → Soft Bond

And here's a mistake we see all the time:

⚠️ If you're NOT running a 30" Lavina Propane, you should typically be using single-bar tooling for better pressure, faster cutting, and improved production.

✅ More pressure per segment
✅ Faster stock removal
✅ Better scratch pattern
✅ Better tooling performance

Not sure what concrete you're working on?

Send me:
📸 Photos of the slab
📏 Square footage
⚙️ Grinder model

I'll help you choose the correct:
✔ Bond
✔ Grit sequence
✔ Tooling setup

📞 Call/Text: 567-712-1611

06/03/2026

Check out this Flow! 🤯

06/01/2026

🔥 Best Grinder Setup Under $8k?

If you’re trying to get into epoxy coatings, garage floors, flake systems, or small commercial prep work, your grinder setup matters.

The Wolfpack Warrior + Vac 2 Auto is one of the best starter setups because it gives you the three things every coating contractor needs:

✅ Real surface prep power
✅ Dust-controlled grinding
✅ A setup that does not destroy your budget

This package is built for contractors who want to start taking on coating jobs without jumping straight into a $15k–$25k setup.

And the best part?

You can pair this with epoxy, polyaspartic, tooling, sundries, and flake to start bidding real jobs right away.

We also have flakes available at $86 per box, so you can stock up while building out your coating system.

If you’re trying to start or upgrade your floor coating business, this is the kind of setup that can start making you money fast.

04/27/2026

This is what a REAL flake floor is supposed to look like.

Double broadcast terrazzo system — locked in with PurePoxy PP-S85.

Not thin. Not patchy. Not “good enough.”

✔️ Full broadcast for maximum durability
✔️ High-build system = long-term performance
✔️ Clean, glossy finish that sells itself

This is the difference between a basic floor… and a premium install clients will pay for.

If you’re still doing light broadcasts or cutting corners on material — you’re leaving money on the table.

I’ll help you build systems like this so you can charge more and get better results.

📲 Call/Text me: 567-712-1611

04/24/2026

This is why standard coatings FAIL outside.

Sun. Heat. Freeze/thaw. Movement.
Most systems can’t handle it — Elastideck can.

This is a pre-topcoat Elastideck install dialed in and ready to be sealed up.

✔️ Flexible system (moves with the concrete)
✔️ Built for exterior exposure
✔️ Won’t crack and peel like traditional coatings

If you’re doing patios, porches, or exterior slabs and NOT using a system like this…
you’re setting yourself up for callbacks.

This is how you protect your work AND your reputation.

I’ll help you get set up with the right exterior system so your jobs last.

📲 Call/Text me: 567-712-1611