ATI Clutch & Brake

ATI Clutch & Brake Clutch & brake rebuilders, AG and Industrial, domestic and foreign, HD truck. Full service shop.

New Holland TN75 clutch on adjustment and proving air table. This clutch will be adjusted to OE specs and worked to assu...
09/03/2026

New Holland TN75 clutch on adjustment and proving air table. This clutch will be adjusted to OE specs and worked to assure proper working.

Just a few of the recent AG clutches that have recently been sold and rebuilt for stock again. These are headed for the...
09/03/2026

Just a few of the recent AG clutches that have recently been sold and rebuilt for stock again. These are headed for the air table for final adjustment and testing.

Before and after pics of a New Holland TN75 farm tractor clutch. This is a 6 lever, 3 levers control the captured master...
09/03/2026

Before and after pics of a New Holland TN75 farm tractor clutch. This is a 6 lever, 3 levers control the captured master drive disc and 3 levers control the button PTO disc. We also provided him release bearings, cleaning carrier and pressing them into place. We also machined his flywheel with a new pilot bearing installed. Come see us for all your AG tractor clutch needs. Several different model clutches are here in stock and ready to go.

We relined our Santa Cruz customer 1957 Fiat 1100 brake shoes. These are aluminum brake shoes so lots of care need be t...
09/03/2026

We relined our Santa Cruz customer 1957 Fiat 1100 brake shoes. These are aluminum brake shoes so lots of care need be taken when removing old linings and heat bonding new segments. Come see us for all your custom brake lining.

This was also an exchange 14 inch Valeo pull type clutch set for an older Harobed retriever.
08/26/2026

This was also an exchange 14 inch Valeo pull type clutch set for an older Harobed retriever.

This was an exchange clutch unit on a 685 International tractor. It was on the shelf ready to go. We provided him the ...
08/25/2026

This was an exchange clutch unit on a 685 International tractor. It was on the shelf ready to go. We provided him the release and pilot bearings.

Before and after of a Ford 7740 tractor clutch. This was a stocking exchange unit with a new HD button master drive dis...
08/25/2026

Before and after of a Ford 7740 tractor clutch. This was a stocking exchange unit with a new HD button master drive disc. We provided him new release bearing, new PTO splined drive hub w new pilot bearing, machined his flywheel and he was ready to go. See us for all your AG clutch needs.

Before and after pics of a New Holland TN75 tractor clutch. Rebuilt his clutch unit. Provided and installed new releas...
08/25/2026

Before and after pics of a New Holland TN75 tractor clutch. Rebuilt his clutch unit. Provided and installed new release bearings. Machined his flywheel. All next day service. See us for all your AG clutch needs.

This is a rebuild on a John Deere 4320 tractor clutch. This is a 13-1/2 dual stage clutch. This build included a new r...
07/08/2026

This is a rebuild on a John Deere 4320 tractor clutch. This is a 13-1/2 dual stage clutch. This build included a new rear plate casting as his was extremely worn past usable limits, a new master HD button disc and several other miscellaneous smaller parts. We also machined his flywheel to specs and provided him all the release bearing he needed. See us for all your AG tractor rebuilding. Most of these popular clutches are here in stock.

This is an NACD PTO equipment over center clutch. We rebuilt it completely for our customer. It had broken an ear on t...
07/08/2026

This is an NACD PTO equipment over center clutch. We rebuilt it completely for our customer. It had broken an ear on the release bearing sleeve and when it let go it sure made a mess of things. So we cleaned everything up and machined his pressure plates. Installed new sleeve and pressure levers along with two new gear tooth frictions. Assembled everything for him and got him going within a short time as possible. Had to get that water running back on his crops. See us for all your clutch/friction supplies. We will do our best to get you going again as soon as possible.

Address

203 South State Highway 59, STE. A
Merced, CA
95341

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+12093842020

Website

Alerts

Be the first to know and let us send you an email when ATI Clutch & Brake posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to ATI Clutch & Brake:

Shortcuts

Share

Category