Tool Mart Inc

Tool Mart Inc Distributor of construction tooling, job site storage and safety equipment. Need to rent a tool or have one repaired? Let us help!

From 4 feet off the slab to 20 feet up in an aerial lift — zero compromises on height safety. 🪜🦺Equip your crew with the...
09/15/2026

From 4 feet off the slab to 20 feet up in an aerial lift — zero compromises on height safety. 🪜🦺

Equip your crew with the ultimate height access ecosystem from Werner at Tool Mart:

🔹 Werner Aerial Fall Protection Kit (SKU: WERK121013):

Complete full-body harness and lanyard kit engineered specifically for boom lifts, scissor lifts, and elevated platforms. Lightweight, fully adjustable, and ready for all-day wear.

🔹 Werner 24ft Fiberglass Extension Ladder (SKU: WERD6224-2):

Heavy-duty Type IA (300 lb rated) non-conductive fiberglass rails with slip-resistant D-rungs. The gold standard for safe exterior rough-ins and high-ceiling electrical access.

🔹 Werner 4ft Twin Step / Platform Ladder (SKU: WERP404):

Built with a duty rating for two-person entry (300 lbs per side). Perfect for tight mechanical rooms, overhead drywall fitting, or dual-operator wiring jobs where a standard step ladder won't cut it.

Don't risk compliance or safety with worn-out access gear. Keep your workers secure, your site compliant, and your project moving forward.

🛒 Shop the complete Werner safety lineup at Tool Mart today: www.toolmarthou.com

09/09/2026

Rated for heavy loads. Built for total safety. 🏗️⚡

Never compromise on your rigging gear. The 4" x 20' 2-Ply Nylon Sling combines maximum load ratings with OSHA-compliant safety features.

🔹 23,000 lb Basket Capacity
🔹 Red Core Warning Yarns for instant wear inspection
🔹 OSHA-Compliant TUFF-TAG™ for permanent identification
🔹 Abrasion-Resistant Treatment for longer service life

Stop risking safety with worn slings. Equip your crew with certified rigging essentials.

🛒 Shop at Tool Mart today
🔗 toomarthou.com

To the ones who show up early, stay late, and build the foundation of every community — this day is for you. 🛠️🇺🇸Behind ...
09/07/2026

To the ones who show up early, stay late, and build the foundation of every community — this day is for you. 🛠️🇺🇸

Behind every highway, home, commercial layout, and power grid are the skilled hands of trade professionals who bring blueprints to life. You tackle the heat, handle the heavy lifting, and get the job done right — no shortcuts, no excuses.

At Tool Mart, we are proud to stand behind the electricians, plumbers, carpenters, masons, and contractors who keep Texas moving forward every single day.

Take a well-deserved break, enjoy the long weekend with your family and crew, and put the tools down — you’ve earned it!

📍 Tool Mart | 🌐 www.toolmarthou.com

Don’t scrap a $2,500 threading machine over a $300 fix. 🛠️💡When a heavy-duty tool breaks down on the job site, most cont...
09/03/2026

Don’t scrap a $2,500 threading machine over a $300 fix. 🛠️💡

When a heavy-duty tool breaks down on the job site, most contractors default to buying a replacement. But across a crew running multiple specialty tools, that habit drains thousands of dollars out of your annual operating budget.

Before you drop thousands on new equipment, do the math: A RIDGID pipe threader or Greenlee bender with a failed motor can easily cost $1,200–$2,500 to replace — or just $300–$600 to restore to full factory specifications using genuine OEM parts.

At Tool Mart, we are offering Houston and San Antonio contractors a smarter way to manage their equipment:

✅ 100% Genuine OEM Parts: We never use cheap aftermarket substitutes that void your remaining manufacturer warranty or fail 3 months later.
✅ Transparent Written Quotes: You receive a detailed estimate and give explicit approval BEFORE any repair work begins. No hidden fees.
✅ Factory-Trained Technicians: Serviced strictly to original published performance specs.
✅ Downtime Management: Local service in Houston (Missouri City) & San Antonio—plus rental fleets available to keep your crew moving while your gear is in the shop.

Not sure if your tool is worth repairing, covered under warranty, or ready for retirement? We broke down the complete decision matrix for contractors.

📖 Read our full jobsite guide: "Tool Mart Tool Repair Services Explained: What to Expect, What's Covered, and When to Call"
🔗 https://www.toolmarthou.com/blogs/news/tool-mart-tool-repair-services-explained

When precision metal fabrication or heavy field maintenance calls for structural holes, low-grade drill bits and hand ta...
09/01/2026

When precision metal fabrication or heavy field maintenance calls for structural holes, low-grade drill bits and hand taps just won't cut it. One bound tap can ruin hours of work and cost you hundreds in labor.

Master your metalworking setup with Champion Cutting Tools at Tool Mart:

💥 Precision Hole Drilling:

Champion Final Cobalt Bits (SKU: CHAM705C-5/16): Engineered with premium M42 cobalt steel to slice through stainless steel and hard alloys without thermal breakdown.

Silver & Deming 1/2" Shank Bits (SKU: CHAM712-3/4 & CHAM712-1-9/64): Fits standard 1/2" drill chucks, delivering massive hole capacity with zero slipping.

💥 Clean, Flawless Threading:

Champion Hand Taps (SKUs: CHAM308 Series): Taper, Plug, and Bottoming taps machined from high-speed steel for accurate thread geometry and smooth chip evacuation.

Stop burning through cheap cutting tools. Equip your shop with Champion steel built for daily industrial abuse.

🛒 Stock up on Champion drills and taps at Tool Mart today: www.toolmarthou.com

08/27/2026

Punch 4" holes in 8 seconds flat. ⚡️🔩

Speed up your electrical rough-ins with the Greenlee Intelli-Punch 1/2"-4" Knockout Kit. Smart battery-hydraulic power built for maximum jobsite speed.

✅ 8-Sec Fast Cycle — Complete punches in a fraction of the time.
✅ Auto-Retract Tech — Pressure-sensing ram automatically retracts on completion.
✅ 1/2" to 4" Capacity — Covers your largest commercial panel knockouts.

Punch faster, protect your tools, and crush your schedule.

🔗 Shop online at Tool Mart today!
👉 toolmarthou.com

A bad layout measurement costs ten times more than a good marking tool. 📐🖌️Whether snapping layout lines for wall tracks...
08/25/2026

A bad layout measurement costs ten times more than a good marking tool. 📐🖌️

Whether snapping layout lines for wall tracks, color-coding utility conduit runs, or spraying OSHA safety boundaries across an active job site—clear, durable marking is the foundation of every successful build.

Get your layout crew set up with industry-standard marking essentials from Tool Mart:

🔹 Stanley Chalk Line Reels & High-Vis Chalk (SKU: STA47-099 & STA47-502): Snap crisp, bold, weather-resistant layout lines over long distances with zero bleed.
🔹 Arro-Mark Industrial Paint Markers (SKU: ARRPM16 Series): Write permanent, oil-based marks on dirty, oily, wet steel, PVC, and concrete.
🔹 OSHA Safety Spray Paint (SKU: DIVA01770): Fast-drying, high-visibility marking paint for hazard identification and utility locates that meet jobsite compliance.

Keep your layout sharp, your team safe, and your project on schedule.

🛒 Grab your marking and layout gear at Tool Mart today: www.toolmarthou.com

08/21/2026

Stop guessing your angles. 📐🔥

Bending conduit just got a massive upgrade. Meet the Greenlee 854DX Single Shoe Electric Conduit Bender — engineered for serious precision on the jobsite.

✅ 1/2" to 2" Rigid/EMT/IMC Capacity — One shoe does it all.
✅ Precision Digital Pendant Indicator — Perfect, repeatable angles every single time.

Work smarter, bend faster.

🔗 toolmarthou.com

Right bit. Right material. Zero wasted time. 🛠️⚡Using the wrong bit burns through tools and ruins expensive material. Ma...
08/19/2026

Right bit. Right material. Zero wasted time. 🛠️⚡

Using the wrong bit burns through tools and ruins expensive material. Match your bit geometry to the job to get clean, fast holes every time:

🔹 Cobalt Twist Bits: High-speed drilling through metal studs, steel, and enclosures.
🔹 SDS-Plus & SDS-Max: Maximum impact power for concrete and structural masonry anchors.
🔹 Spade & Installer Bits: Rapid wood boring for running pipe and wiring through joists.
🔹 Step Bits: Multi-size knockouts in sheet metal without binding or catching.

Need help matching RPM specs, torque, and drill platforms to your trade?

📖 Read our full guide on the blog:
https://www.toolmarthou.com/blogs/news/types-of-drill-bits-guide

August in Texas doesn't just drain your crew — it kills your battery runtime. ☀️🔋When ambient temperatures hit 100°F+ on...
08/12/2026

August in Texas doesn't just drain your crew — it kills your battery runtime. ☀️🔋

When ambient temperatures hit 100°F+ on the jobsite, standard battery packs build up internal heat twice as fast. Result? Thermal shutdowns, shortened battery lifespans, and stalled crews in the middle of a heavy rough-in.

🌡️ Upgrade to High Output Tech: Milwaukee REDLITHIUM™ HIGH OUTPUT™ batteries run cooler under heavy applications compared to standard packs, preventing thermal cut-off on high-draw tools.
🌡️ Shade Your Charging Stations: Never leave battery chargers in direct sunlight or locked in an unventilated truck bed. Keep chargers in the shade or inside a cooled gang box.
🌡️ Keep Air Moving: Equip your staging areas with heavy-duty M18 Jobsite Fans to lower ambient temperatures around your crew and cooling equipment.

Keep your batteries cool, your tools running, and your crew safe this August.

🛒 Stock up on high-output batteries, jobsite cooling gear, and fleet essentials at Tool Mart today: www.toolmarthou.com

Address

13721 S. Gessner
Missouri City, TX
77489

Opening Hours

Monday 7am - 4pm
Tuesday 7am - 4pm
Wednesday 7am - 4pm
Thursday 7am - 4pm
Friday 7am - 4pm

Website

,

Alerts

Be the first to know and let us send you an email when Tool Mart Inc posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category